1. Announcement of New Editor

   Announcement 08 December 2012 Pages: 1 - 1

   

2. Modeling Lath Martensite Transformation Curve

   • J.R.C. Guimarães
   • P.R. Rios

   Communication 23 October 2012 Pages: 2 - 4

   

3. Effect of Intermittent Overload Cycles on Thermomechanical Fatigue Life of NiTi Shape Memory Alloy Wire

   • C. N. Saikrishna
   • K. V. Ramaiah
   • S. K. Bhaumik

   Communication 01 December 2012 Pages: 5 - 8

   

4. Microstructural Evolution of Brazed CP-Ti Using the Clad Ti-20Zr-20Cu-20Ni Foil

   • Tze-Yang Yeh
   • Ren-Kae Shiue
   • Chenchung Steve Chang

   Communication 16 November 2012 Pages: 9 - 14

   

5. Foreword

   • R. I. Barabash
   • Xun-Li Wang
   • P. K. Liaw

   Symposium: Neutron and X-Ray Studies of Advanced Materials V—Diffraction Centennial 08 November 2012 Pages: 15 - 16

6. Assessment of Plastic Deformation Induced by Indentation on a Large Grain on Inconel 600 Using Synchrotron Polychromatic X-ray Microdiffraction

   • Marina Suominen Fuller
   • Rozaliya Barabash
   • Wenjun Liu

   Symposium: Neutron and X-Ray Studies of Advanced Materials V 07 July 2012 Pages: 17 - 21

   

7. Application of In Situ Neutron and X-Ray Measurements at High Temperatures in the Development of Co-Re-Based Alloys for Gas Turbines

   • Debashis Mukherji
   • Joachim Rösler
   • Zsuzsanna Mácsik

   Symposium: Neutron and X-Ray Studies of Advanced Materials V 30 August 2012 Pages: 22 - 30

   

8. A Methodology for Determination of γ′ Site Occupancies in Nickel Superalloys Using Atom Probe Tomography and X-ray Diffraction

   • Jaimie S. Tiley
   • O. Senkov
   • R. Banerjee

   Symposium: Neutron and X-Ray Studies of Advanced Materials V 06 November 2012 Pages: 31 - 38

   

9. Interference Effects in Nanocrystalline Systems

   • A. Leonardi
   • M. Leoni
   • P. Scardi

   Symposium: Neutron and X-Ray Studies of Advanced Materials V 18 September 2012 Pages: 39 - 44

   

10. On X-Ray Diffraction Study of Microstructure of ZnO Thin Nanocrystalline Films with Strong Preferred Grain Orientation

    • R. Kužel
    • J. Čížek
    • M. Novotný

    Symposium: Neutron and X-Ray Studies of Advanced Materials V 02 October 2012 Pages: 45 - 57

    

11. Hydrogen Storage Properties of Graphite-Modified Mg-Ni-Ce Composites Prepared by Mechanical Milling Followed by Microwave Sintering

    • Jie Meng
    • Xun-Li Wang
    • Qian Li

    Symposium: Neutron and X-Ray Studies of Advanced Materials V 19 September 2012 Pages: 58 - 67

    

12. Ultra-Small-Angle X-ray Scattering Instrument at the Advanced Photon Source: History, Recent Development, and Current Status

    • J. Ilavsky
    • F. Zhang
    • G. G. Long

    Symposium: Neutron and X-Ray Studies of Advanced Materials V 05 October 2012 Pages: 68 - 76

    

13. Quantitative Characterization of Precipitate Microstructures in Metallic Alloys Using Small-Angle Scattering

    • Alexis Deschamps
    • Frédéric de Geuser

    Symposium: Neutron and X-Ray Studies of Advanced Materials V 02 October 2012 Pages: 77 - 86

    

14. Assessing Local Structure in PbZn_1/3Nb_2/3O₃ Using Diffuse Scattering and Reverse Monte Carlo Refinement

    • M. Paściak
    • A. P. Heerdegen
    • T. R. Welberry

    Symposium: Neutron and X-Ray Studies of Advanced Materials V 20 October 2012 Pages: 87 - 93

    

15. A Review on Small- and Wide-Angle X-Ray Scattering Applied to the Precipitation Process in Metallic Alloys

    • Hiroshi Okuda
    • Shojiro Ochiai

    Symposium: Neutron and X-Ray Studies of Advanced Materials V 07 December 2012 Pages: 94 - 101

    

16. Lattice Defects Diffuse Scattering from Thin Films of a Ge-Si System with Low-Energy Ar⁺ and Xe⁺ Bombardment During Molecular Beam Epitaxy (MBE) Growth

    • Paul Rozenak

    Symposium: Neutron and X-Ray Studies of Advanced Materials V 09 October 2012 Pages: 102 - 114

    

17. The Distribution of Grain Boundary Planes in Interstitial Free Steel

    • Hossein Beladi
    • Gregory S. Rohrer

    OriginalPaper 08 September 2012 Pages: 115 - 124

    

18. Retardation of the Cu₅Zn₈ Phase Fracture and Improvement of Shear Strength of the Sn-9 wt pct Zn/Cu Interface by Inserting an Electroless Palladium Layer

    • Po-Hsun Lee
    • Chi-Pu Lin
    • Chih-Ming Chen

    OriginalPaper 11 August 2012 Pages: 125 - 130

    

19. Strain Effect on the γ′ Dissolution at High Temperatures of a Nickel-Based Single Crystal Superalloy

    • Rémi Giraud
    • Zéline Hervier
    • José Mendez

    OriginalPaper 22 September 2012 Pages: 131 - 146

    

20. Microstructural Analysis of the Martensite Volume Fraction

    • J. R. C. Guimarães
    • P. R. Rios

    OriginalPaper 09 November 2012 Pages: 147 - 151

    

21. Texture Evolution of Abnormal Grains with Post-Deposition Annealing Temperature in Nanocrystalline Cu Thin Films

    • Sung Bo Lee
    • Dong-Ik Kim
    • Dong Nyung Lee

    OriginalPaper 27 November 2012 Pages: 152 - 162

    

22. Comparative Study on Austenite Decomposition and Cu Precipitation During Continuous Cooling Transformation

    • Qing-Dong Liu
    • Shi-Jin Zhao

    OriginalPaper 30 August 2012 Pages: 163 - 171

    

23. Effect of Co Addition on the Microstructure, Martensitic Transformation and Shape Memory Behavior of Fe-Mn-Si Alloys

    • Bikas C. Maji
    • Madangopal Krishnan
    • Ranjit K. Ray

    OriginalPaper 30 August 2012 Pages: 172 - 185

    

24. Effect of Pre-Treatment on Copper Precipitation Characteristics in a Copper-Alloyed Interstitial Free Steel Studied by Thermoelectric Power Measurement

    • Radhakanta Rana
    • Véronique Massardier
    • Omkar Nath Mohanty

    OriginalPaper 22 September 2012 Pages: 186 - 200

    

25. Effects of Thermomechanical Processing and Heat Treatment on the Tensile and Creep Properties of Boron-Modified Near Alpha Titanium Alloy Ti-1100

    • Vivek Chandravanshi
    • R. Sarkar
    • T. K. Nandy

    OriginalPaper 26 September 2012 Pages: 201 - 211

    

26. Analysis of Tensile Stress-Strain and Work-Hardening Behavior in 9Cr-1Mo Ferritic Steel

    • B. K. Choudhary
    • D. P. Rao Palaparti
    • E. Isaac Samuel

    OriginalPaper 08 September 2012 Pages: 212 - 223

    

27. Study of Damage and Fracture Toughness Due to Influence of Creep and Fatigue of Commercially Pure Copper by Monotonic and Cyclic Indentation

    • Sabita Ghosh
    • Raghu V. Prakash

    OriginalPaper 01 September 2012 Pages: 224 - 234

    

28. Effect of Tempering Time on Microstructure, Tensile Properties, and Deformation Behavior of a Ferritic Light-Weight Steel

    • Seung Youb Han
    • Sang Yong Shin
    • Jai-Hyun Kwak

    OriginalPaper 16 August 2012 Pages: 235 - 247

    

29. The Relationship Between Crack-Tip Strain and Subcritical Cracking Thresholds for Steels in High-Pressure Hydrogen Gas

    • Kevin A. Nibur
    • Brian P. Somerday
    • Petros Sofronis

    OriginalPaper 07 November 2012 Pages: 248 - 269

    

30. Effects of Deformation Behavior and Processing Temperature on the Fatigue Performance of Deep-Rolled Medium Carbon Bar Steels

    • M. D. Richards
    • M. E. Burnett
    • D. K. Matlock

    OriginalPaper 22 September 2012 Pages: 270 - 285

    

31. Medium-Alloy Manganese-Rich Transformation-Induced Plasticity Steels

    • Dong Woo Suh
    • Joo Hyun Ryu
    • H. K. D. H. Bhadeshia

    OriginalPaper 15 September 2012 Pages: 286 - 293

    

32. Effects of Cooling Conditions on Microstructure, Tensile Properties, and Charpy Impact Toughness of Low-Carbon High-Strength Bainitic Steels

    • Hyo Kyung Sung
    • Sang Yong Shin
    • Sunghak Lee

    OriginalPaper 21 August 2012 Pages: 294 - 302

    

33. A New Nonmetallic Inclusion Rating Method by Positive Use of Hydrogen Embrittlement Phenomenon

    • Shinji Fujita
    • Yukitaka Murakami

    OriginalPaper 11 September 2012 Pages: 303 - 322

    

34. Friction Stir Welded AZ31 Magnesium Alloy: Microstructure, Texture, and Tensile Properties

    • S. H. Chowdhury
    • D. L. Chen
    • P. Wanjara

    OriginalPaper 24 August 2012 Pages: 323 - 336

    

35. Material Flow in Friction Stir Welds

    • Richard Fonda
    • Anthony Reynolds
    • David Rowenhorst

    OriginalPaper 17 October 2012 Pages: 337 - 344

    

36. Microstructural Evolution During Friction Surfacing of Austenitic Stainless Steel AISI 304 on Low Carbon Steel

    • H. Khalid Rafi
    • N. Kishore Babu
    • K. Prasad Rao

    OriginalPaper 05 September 2012 Pages: 345 - 350

    

37. An Improved Theoretical Model for A-TIG Welding Based on Surface Phase Transition and Reversed Marangoni Flow

    • T. Sándor
    • C. Mekler
    • G. Kaptay

    OriginalPaper 30 August 2012 Pages: 351 - 361

    

38. Influence of Gas Atmosphere Dew Point on the Selective Oxidation and the Reactive Wetting During Hot Dip Galvanizing of CMnSi TRIP Steel

    • Lawrence Cho
    • Seok Jae Lee
    • Bruno C. De Cooman

    OriginalPaper 12 September 2012 Pages: 362 - 371

    

39. Microstructural Characterization and Properties Evaluation of Ni-Based Hardfaced Coating on AISI 304 Stainless Steel by High Velocity Oxyfuel Coating Technique

    • Prashant Sharma
    • Jyotsna Dutta Majumdar

    OriginalPaper 08 September 2012 Pages: 372 - 380

    

40. Evaluation of Dielectric Properties, Vibration Modes, and Crystal Structures in Ba[Zn_(1−x)/3Ni _x/3Nb_2/3]O₃ Ceramics

    • Feng Shi
    • Chuanling Diao

    OriginalPaper 10 October 2012 Pages: 381 - 387

    

41. Behavior of Boron in Molten Aluminum and its Grain Refinement Mechanism

    • Houshang D. Alamdari
    • Dominique Dubé
    • Pascal Tessier

    OriginalPaper 13 September 2012 Pages: 388 - 394

    

42. Liquidus Projection of the B-Fe-U Diagram: The Boron-Rich Corner

    • Marta Dias
    • Patrícia Almeida Carvalho
    • António Pereira Gonçalves

    OriginalPaper 01 September 2012 Pages: 395 - 405

    

43. The Morphological Evolution of Low Volume Fraction Tin Dendrites During Coarsening

    • Amber L. Genau
    • Peter W. Voorhees

    OriginalPaper 06 September 2012 Pages: 406 - 418

    

44. Reduced-Pressure Foaming of Aluminum Alloys

    • G. S. Vinod Kumar
    • M. Mukherjee
    • J. Banhart

    OriginalPaper 10 October 2012 Pages: 419 - 426

    

45. Electron Microscopic Study on the Suction Cast In Situ Ti-Fe-Sn Ultrafine Composites

    • Sumanta Samal
    • Barnali Mondal
    • Govind

    OriginalPaper 26 September 2012 Pages: 427 - 439

    

46. Strengthening and Toughening of a Heavy Plate Steel for Shipbuilding with Yield Strength of Approximately 690 MPa

    • Dongsheng Liu
    • Binggui Cheng
    • Yuanyuan Chen

    OriginalPaper 26 September 2012 Pages: 440 - 455

    

47. Experimental Determination of Heat Transfer Across the Metal/Mold Gap in a Direct Chill (DC) Casting Mold—Part I: Effect of Gap Size and Mold Gas Type

    • Arvind Prasad
    • Ian Bainbridge

    OriginalPaper 07 August 2012 Pages: 456 - 468

    

48. Particle Stimulated Nucleation in Coarse-Grained Ferritic Stainless Steel

    • Rodrigo Pinto de Siqueira
    • Hugo Ricardo Zschommler Sandim
    • Dierk Raabe

    OriginalPaper 18 September 2012 Pages: 469 - 478

    

49. Deformation Characteristics and Recrystallization Response of a 9310 Steel Alloy

    • David Snyder
    • Edward Y. Chen
    • Sammy Tin

    OriginalPaper 18 September 2012 Pages: 479 - 493

    

50. Phase and Formation/Dissolution of Precipitates in Biomedical Co-Cr-Mo Alloys with Nitrogen Addition

    • Shingo Mineta
    • Alfirano
    • Takayuki Narushima

    OriginalPaper 22 September 2012 Pages: 494 - 503