1. Effect of C Fraction on Corrosion Properties of High Interstitial Alloyed Stainless Steels

   • Heon-Young Ha
   • Tae-Ho Lee
   • Sung-Joon Kim

   Communication 30 June 2012 Pages: 2999 - 3005

   

2. Magnetic Polishing of Titanium-Nickel Alloy Stents: Surface Characterization and Catheter Deployment Test

   • Chan-Hee Park
   • Tae-Hyung Kim
   • Cheol Sang Kim

   Communication 04 July 2012 Pages: 3006 - 3010

   

3. Microstructure and Hydrogen-Induced Failure Mechanisms in Fe and Ni Alloy Weldments

   • J. A. Fenske
   • I. M. Robertson
   • Brian Newbury

   OriginalPaper 22 June 2012 Pages: 3011 - 3022

   

4. Dynamic Deformation Behavior of Zr-Based Amorphous Alloy Matrix Composites Reinforced with STS304 or Tantalum Fibers

   • Yongjin Kim
   • Sang Yong Shin
   • Sunghak Lee

   OriginalPaper 16 March 2012 Pages: 3023 - 3033

   

5. Microstructure and Mechanical Behavior of a Mini-Thixoformed Tool Steel

   • Indrani Sen
   • Hana Jirková
   • Martin F.-X. Wagner

   Communication 07 July 2012 Pages: 3034 - 3038

   

6. Effects of Pulse Current on Transient Liquid Phase (TLP) Diffusion Bonding of SiCp/2024Al Composites Sheet Using Mixed Al, Cu, and Ti Powder Interlayer

   • Bo Wang
   • Shaosong Jiang
   • Kaifeng Zhang

   Communication 10 July 2012 Pages: 3039 - 3042

   

7. Strengthening Mechanisms and Their Relative Contributions to the Yield Strength of Microalloyed Steels

   • Junfang Lu
   • Oladipo Omotoso
   • Hani Henein

   OriginalPaper 29 March 2012 Pages: 3043 - 3061

   

8. Nanocrystal Growth in Thermally Treated Fe₇₅Ni₂Si₈B₁₃C₂ Amorphous Alloy

   • Dragica M. Minić
   • Vladimir A. Blagojević
   • Tomáš Žák

   OriginalPaper 05 April 2012 Pages: 3062 - 3069

   

9. Investigation of Deformation Mechanisms in Deep-Drawn and Tensile-Strained Austenitic Mn-Based Twinning Induced Plasticity (TWIP) Steel

   • R. T. van Tol
   • L. Zhao
   • J. Sietsma

   OriginalPaper Open access 01 May 2012 Pages: 3070 - 3077

   

10. Resistivity and Transmission Electron Microscopy Investigations of Ordering Transformation in Stoichiometric Ni₂(Cr_0.5Mo_0.5) Alloy

    • A. Verma
    • Jung B. Singh
    • Nelia Wanderka

    OriginalPaper 06 June 2012 Pages: 3078 - 3085

    

11. On the Distinction Between Plasticity- and Roughness-Induced Fatigue Crack Closure

    • Sotomi Ishihara
    • Yuya Sugai
    • Arthur J. McEvily

    OriginalPaper 23 March 2012 Pages: 3086 - 3096

    

12. Tailored Heat Treated Accumulative Roll Bonded Aluminum Blanks: Microstructure and Mechanical Behavior

    • Verena Maier
    • Tina Hausöl
    • Mathias Göken

    OriginalPaper 06 June 2012 Pages: 3097 - 3107

    

13. Microstructures and Mechanical Properties of Biomedical Co-29Cr-6Mo-0.14N Alloys Processed by Hot Rolling

    • Manami Mori
    • Kenta Yamanaka
    • Akihiko Chiba

    OriginalPaper 05 April 2012 Pages: 3108 - 3119

    

14. The Dependence of Creep Behavior on Elemental Partitioning in Mg-5Al-3Ca-xSn Alloys

    • Jessica R. TerBush
    • Olivia H. Chen
    • Tresa M. Pollock

    OriginalPaper 07 April 2012 Pages: 3120 - 3134

    

15. Stress Corrosion Cracking Behavior of Multipass TIG-Welded AA2219 Aluminum Alloy in 3.5 wt pct NaCl Solution

    • A. Venugopal
    • K. Sreekumar
    • V. S. Raja

    OriginalPaper 24 March 2012 Pages: 3135 - 3148

    

16. Microstructural and Residual Stress Development due to Inertia Friction Welding in Ti-6246

    • Moataz M. Attallah
    • Michael Preuss
    • Gavin J. Baxter

    OriginalPaper 04 April 2012 Pages: 3149 - 3161

    

17. Effect of Hyperbaric Chamber Gas on Transformation Texture of the API-X70 Pipeline Weld Metal

    • Amin S. Azar
    • Erling Østby
    • Odd M. Akselsen

    OriginalPaper 05 April 2012 Pages: 3162 - 3178

    

18. Investigation of Hot Cracking Behavior in Transverse Mechanically Arc Oscillated Autogenous AA2014 T6 TIG Welds

    • N. S. Biradar
    • R. Raman

    OriginalPaper 26 May 2012 Pages: 3179 - 3191

    

19. Effect of Thermal Aging on the Corrosion and Microstructure of Friction-Stir Welded Alloy 22

    • Bharat K. Jasthi
    • William J. Arbegast
    • Stanley M. Howard

    OriginalPaper 29 March 2012 Pages: 3192 - 3201

    

20. Circumventing Practical Difficulties in Determination of Threshold Stress Intensity for Stress Corrosion Cracking of Narrow Regions of Welded Structures

    • Sarvesh Pal
    • R. K. Singh Raman
    • R. Rihan

    OriginalPaper 17 March 2012 Pages: 3202 - 3214

    

21. Surface Preparation of Powder Metallurgical Tool Steels by Means of Wire Electrical Discharge Machining

    • Sepehr Hatami
    • Mehrdad Shahabi-Navid
    • Lars Nyborg

    OriginalPaper 26 May 2012 Pages: 3215 - 3226

    

22. Observation and Prediction of the Hot Tear Susceptibility of Ternary Al-Si-Mg Alloys

    • Mark A. Easton
    • Hao Wang
    • Malcolm J. Couper

    OriginalPaper 04 May 2012 Pages: 3227 - 3238

    

23. Directional Solidification and Microsegregation in a Magnesium-Aluminum-Calcium Alloy

    • Xingwei Zheng
    • Alan A. Luo
    • Richard A. Waldo

    OriginalPaper 24 May 2012 Pages: 3239 - 3248

    

24. Investigation of Wear Anisotropy in a Severely Deformed Al-Al₃Ti Composite

    • Shimaa El-Hadad
    • Hisashi Sato
    • Yoshimi Watanabe

    OriginalPaper 15 May 2012 Pages: 3249 - 3256

    

25. Texture Evolution of Hot-Rolled, Near-α-Based Titanium Matrix Composites

    • Xianglong Guo
    • Liqiang Wang
    • Weijie Lu

    OriginalPaper 21 March 2012 Pages: 3257 - 3263

    

26. Solution Heat Treatment Optimization of Fourth-Generation Single-Crystal Nickel-Base Superalloys

    • Hon Tong Pang
    • Lijuan Zhang
    • Catherine M.F. Rae

    OriginalPaper 11 April 2012 Pages: 3264 - 3282

    

27. Microstructure and Mechanical Properties of Two-Phase Cr-Cr₂Ta Alloys

    • Ayan Bhowmik
    • Howard J. Stone

    OriginalPaper 23 March 2012 Pages: 3283 - 3292

    

28. A Correlation Between Failure Angle and Constituent for Al-AlN Composites Under Uniaxial Tensile Conditions

    • Peng Yu
    • G. B. Schaffer
    • Ma Qian

    OriginalPaper 30 May 2012 Pages: 3293 - 3299

    

29. Twinning-Slip Transitions in Mg AZ31B

    • Kun Piao
    • Kwansoo Chung
    • Robert H. Wagoner

    OriginalPaper 17 May 2012 Pages: 3300 - 3313

    

30. Strengthening Mechanisms and their Superposition Law in an Age-Hardenable Mg-10 wt pct Y Alloy

    • Dong Qiu
    • Ming-Xing Zhang

    OriginalPaper 05 April 2012 Pages: 3314 - 3324

    

31. The Evolution of Al-Li Base Products for Aerospace and Space Applications

    • Roberto J. Rioja
    • John Liu

    OriginalPaper 31 March 2012 Pages: 3325 - 3337

    

32. Creep and Fracture Behavior of Peak-Aged Mg-11Y-5Gd-2Zn-0.5Zr (wt pct)

    • D. D. Yin
    • Q. D. Wang
    • V. Janik

    OriginalPaper 31 March 2012 Pages: 3338 - 3350

    

33. Precipitates in Biomedical Co-28Cr-6Mo-(0–0.41)C Alloys Heat-Treated at 1473 K to 1623 K (1200 °C to 1350 °C)

    • Shingo Mineta
    • Alfirano
    • Takayuki Narushima

    OriginalPaper 13 April 2012 Pages: 3351 - 3358

    

34. Mechanochemical Behavior of NiO-Al-Fe Powder Mixtures to Produce (Ni, Fe)₃Al-Al₂O₃ Nanocomposite Powder

    • Z. Adabavazeh
    • F. Karimzadeh
    • M. H. Enayati

    OriginalPaper 09 June 2012 Pages: 3359 - 3365

    

35. Evolution of Precipitate Phases During Long-Term Isothermal Aging at 1083 K (810 °C) in a New Precipitation-Strengthened Heat-Resistant Austenitic Stainless Steel

    • Vu The Ha
    • Woo Sang Jung

    OriginalPaper 30 May 2012 Pages: 3366 - 3378

    

36. Corrosion Inhibition of Mild Steel in 1.0 M HCl by Amino Compound: Electrochemical and DFT Studies

    • Ahmed Y. Musa
    • Abu Bakar Mohamad
    • Mohd Sobri Takriff

    OriginalPaper 17 May 2012 Pages: 3379 - 3386

    

37. Parametric Study of Slurry-Erosion of Hydroturbine Steels with and without Detonation Gun Spray Coatings using Taguchi Technique

    • Harpreet Singh Grewal
    • Sanjeev Bhandari
    • Harpreet Singh

    OriginalPaper 28 March 2012 Pages: 3387 - 3401

    

38. Full Densification of Molybdenum Powders Using Spark Plasma Sintering

    • B. Mouawad
    • M. Soueidan
    • H. Morel

    OriginalPaper 23 May 2012 Pages: 3402 - 3409