1. A New Iron-Rich Intermetallic-Al _m Fe Phase in Al-4.6Cu-0.5Fe Cast Alloy

   • K. Liu
   • X. Cao
   • X.-G. Chen

   Communication 05 January 2012 Pages: 1097 - 1101

   

2. Experimental and Theoretical Measurements of the Evolution of Embryos Before and During the Nucleation Stage

   • Yasuhiro Aruga
   • Hidenori Nako

   OriginalPaper 19 October 2011 Pages: 1102 - 1108

   

3. A Semiempirical Model for Sigma-Phase Precipitation in Duplex and Superduplex Stainless Steels

   • P. Ferro
   • F. Bonollo

   OriginalPaper 01 December 2011 Pages: 1109 - 1116

   

4. The Kinetics of and the Microstructure Induced by the Recrystallization of Copper

   • Eric A. Jägle
   • Eric J. Mittemeijer

   OriginalPaper 21 December 2011 Pages: 1117 - 1131

   

5. Loss of Ductility Caused by AlN Precipitation in Hadfield Steel

   • Rene Radis
   • Christian Schlacher
   • Christof Sommitsch

   OriginalPaper 11 November 2011 Pages: 1132 - 1139

   

6. The Effect of Cooling Rate, and Cool Deformation Through Strain-Induced Transformation, on Microstructural Evolution and Mechanical Properties of Microalloyed Steels

   • S. H. Mousavi Anijdan
   • Steve Yue

   OriginalPaper 07 December 2011 Pages: 1140 - 1162

   

7. Type IV Creep Damage Behavior in Gr.91 Steel Welded Joints

   • Hiromichi Hongo
   • Masaaki Tabuchi
   • Takashi Watanabe

   OriginalPaper 28 October 2011 Pages: 1163 - 1173

   

8. A Comparison of Creep Rupture Strength of Ferritic/Austenitic Dissimilar Weld Joints of Different Grades of Cr-Mo Ferritic Steels

   • K. Laha
   • K. S. Chandravathi
   • M. D. Mathew

   OriginalPaper 02 December 2011 Pages: 1174 - 1186

   

9. Copper, Boron, and Cerium Additions in Type 347 Austenitic Steel to Improve Creep Rupture Strength

   • Kinkar Laha
   • J. Kyono
   • Norio Shinya

   OriginalPaper 27 October 2011 Pages: 1187 - 1197

   

10. In Situ Observations of the Deformation Behavior and Fracture Mechanisms of Ti-45Al-2Nb-2Mn + 0.8 vol pct TiB₂

    • Rocio Muñoz-Moreno
    • Carl J. Boehlert
    • Javier Llorca

    OriginalPaper 10 December 2011 Pages: 1198 - 1208

    

11. Solidification Behavior and Weldability of Dissimilar Welds Between a Cr-Free, Ni-Cu Welding Consumable and Type 304L Austenitic Stainless Steel

    • Jeffrey W. Sowards
    • Dong Liang
    • John C. Lippold

    OriginalPaper 26 October 2011 Pages: 1209 - 1222

    

12. Crossed-Wire Laser Microwelding of Pt-10 Pct Ir to 316 Low-Carbon Vacuum Melted Stainless Steel: Part I. Mechanism of Joint Formation

    • G. S. Zou
    • Y. D. Huang
    • Y. Zhou

    OriginalPaper 18 June 2011 Pages: 1223 - 1233

    

13. Crossed-Wire Laser Microwelding of Pt-10 Pct Ir to 316 LVM Stainless Steel: Part II. Effect of Orientation on Joining Mechanism

    • Y. D. Huang
    • A. Pequegnat
    • Y. Zhou

    OriginalPaper 26 January 2012 Pages: 1234 - 1243

    

14. Local Laser Heat Treatment in Dual-Phase Steels

    • Mehdi Asadi
    • Georg Frommeyer
    • Heinz Palkowski

    OriginalPaper 10 November 2011 Pages: 1244 - 1258

    

15. The Influence of Cr on the Solidification Behavior of Polycrystalline γ(Ni)/γ′(Ni₃Al)-δ(Ni₃Nb) Eutectic Ni-Base Superalloys

    • Mengtao Xie
    • Randolph Helmink
    • Sammy Tin

    OriginalPaper 03 November 2011 Pages: 1259 - 1267

    

16. Determination of Solid Fraction from Cooling Curve

    • Junfeng Xu
    • Feng Liu
    • Yuzeng Chen

    OriginalPaper 09 November 2011 Pages: 1268 - 1276

    

17. Origin of Microstructural Irreversibility in Ni-Ti Based Shape Memory Alloys during Thermal Cycling

    • R. Basu
    • L. Jain
    • P. Pant

    OriginalPaper 19 November 2011 Pages: 1277 - 1287

    

18. Mechanism for Formation of Surface Scale during Directional Solidification of Ni-Base Superalloys

    • G. Brewster
    • N. D’Souza
    • H. B. Dong

    OriginalPaper 21 December 2011 Pages: 1288 - 1302

    

19. The Gas Carburization of Linear Cellular Alloys as a Novel Alloy Development Tool

    • Laura C. Dial
    • Thomas H. Sanders Jr.
    • Joe K. Cochran

    OriginalPaper 09 November 2011 Pages: 1303 - 1311

    

20. Ultrafine-Grained Aluminum Processed by a Combination of Hot Isostatic Pressing and Dynamic Plastic Deformation: Microstructure and Mechanical Properties

    • G. Dirras
    • T. Chauveau
    • B. Bacroix

    OriginalPaper 21 December 2011 Pages: 1312 - 1322

    

21. Analysis of Mechanical Milling in Simoloyer: An Energy Modeling Approach

    • B. Karthik
    • G. Sai Gautam
    • B. S. Murty

    OriginalPaper 15 October 2011 Pages: 1323 - 1327

    

22. Asymmetric Rolling of Interstitial-Free Steel Using One Idle Roll

    • R. Lapovok
    • D. Orlov
    • D. Bhattacharjee

    OriginalPaper 30 November 2011 Pages: 1328 - 1340

    

23. Static Electropulsing-Induced Microstructural Changes and Their Effect on the Ultra-Precision Machining of Cold-Rolled AZ91 Alloy

    • Duo Zhang
    • Suet To
    • Guo Yi Tang

    OriginalPaper 10 November 2011 Pages: 1341 - 1346

    

24. Role of Solute in the Texture Modification During Hot Deformation of Mg-Rare Earth Alloys

    • Jason P. Hadorn
    • Kerstin Hantzsche
    • Sean R. Agnew

    OriginalPaper 08 October 2011 Pages: 1347 - 1362

    

25. Effects of Solute and Second-Phase Particles on the Texture of Nd-Containing Mg Alloys

    • Jason P. Hadorn
    • Kerstin Hantzsche
    • Sean R. Agnew

    OriginalPaper 03 February 2012 Pages: 1363 - 1375

    

26. Ti-Y₂O₃ Composites with Nanocrystalline and Microcrystalline Matrix

    • Marek Krasnowski
    • Jan Ryszard Dąbrowski

    OriginalPaper Open access 13 October 2011 Pages: 1376 - 1381

    

27. Elucidation of the Corrosion Inhibition of Mild Steel in 1.0 M HCl by Catechin Monomers from Commercial Green Tea Extracts

    • S. Nofrizal
    • Afidah A. Rahim
    • S. Yahya

    OriginalPaper 21 December 2011 Pages: 1382 - 1393