Volume 39, Issue 11

Search all Metallurgical and Materials Transactions A articles

November 2008

Filter by

Volume:

Sort by

Date published:

New to old Old to new

25 articles in this issue

Emission of Dislocation Loops at Zero Indentation Load in Adhesive Nanocontacts
M. Ravi Shankar
R. Meenakshi Sundaram
Communication 23 August 2008 Pages: 2535 - 2537
Branch Elimination during Heat Treatment of Titanium Alloys with a Colony-Alpha Microstructure
S.L. Semiatin
P.S. Poteet
Communication 20 August 2008 Pages: 2538 - 2541
Static Strain Aging of Microstructural Constituents in Transformation-Induced-Plasticity Steel
L. Samek
E. De Moor
B.C. De Cooman
OriginalPaper 05 August 2008 Pages: 2542 - 2554
Development of High-Strength Cu-Ni-Ti-B Multiphase Steel by Direct Air Cooling
S.K. Ghosh
A. Haldar
P.P. Chattopadhyay
OriginalPaper 30 July 2008 Pages: 2555 - 2568
Microstructure of Long-Term Aged IN617 Ni-Base Superalloy
Quanyan Wu
Hyojin Song
Vijay K. Vasudevan
OriginalPaper 15 August 2008 Pages: 2569 - 2585
Effect of Retained Austenite Stabilized via Quench and Partitioning on the Strain Hardening of Martensitic Steels
E. De Moor
S. Lacroix
J.G. Speer
OriginalPaper 30 July 2008 Pages: 2586 - 2595
Oxygen Embrittlement and Time-Dependent Grain-Boundary Cracking of ALLVAC 718PLUS
R.W. Hayes
OriginalPaper 12 August 2008 Pages: 2596 - 2606
Dislocation Configurations in an Extruded ZK60 Magnesium Alloy
B. Li
E. Ma
K.T. Ramesh
OriginalPaper 20 August 2008 Pages: 2607 - 2614
Effects of Tempering on Microstructure, Hardness, Wear Resistance, and Fracture Toughness of Cr₃C₂/Steel Surface Composites Fabricated by High-Energy Electron-Beam Irradiation
Dukhyun Nam
Sunghak Lee
OriginalPaper 19 August 2008 Pages: 2615 - 2625
Correlation of Microstructure with Hardness and Wear Resistance of Carbide-Reinforced Ferrous Surface Composites Fabricated by High-Energy Electron-Beam Irradiation
Dukhyun Nam
Kyuhong Lee
Sunghak Lee
OriginalPaper 13 September 2008 Pages: 2626 - 2634
Mechanism of Hot Ductility Improvement of a Peritectic Steel Containing Vanadium Using Very-High-Temperature Compression
Ahmad Rezaeian
Faramarz Zarandi
Steve Yue
OriginalPaper 21 August 2008 Pages: 2635 - 2644
Analysis of Severe Plastic Deformation by Large Strain Extrusion Machining
M. Sevier
H.T.Y. Yang
S. Chandrasekar
OriginalPaper 07 August 2008 Pages: 2645 - 2655
Evolution of Structure, Composition, and Stress in Nanoporous Gold Thin Films with Grain-Boundary Cracks
Ye Sun
T. John Balk
OriginalPaper 16 September 2008 Pages: 2656 - 2665
Effect of Frequency, Environment, and Temperature on Fatigue Behavior of E319 Cast-Aluminum Alloy: Small-Crack Propagation
X. Zhu
J.W. Jones
J.E. Allison
OriginalPaper Open access 21 August 2008 Pages: 2666 - 2680
Effect of Frequency, Environment, and Temperature on Fatigue Behavior of E319 Cast Aluminum Alloy: Stress-Controlled Fatigue Life Response
X. Zhu
J.W. Jones
J.E. Allison
OriginalPaper 13 September 2008 Pages: 2681 - 2688
Corrosion of 2205 Duplex Stainless Steel Weldment in Chloride Medium Containing Sulfate-Reducing Bacteria
P.J. Antony
R.K. Singh Raman
R. Raman
OriginalPaper 11 September 2008 Pages: 2689 - 2697
Development of a Three-Dimensional Heat-Transfer Model for the Gas Tungsten Arc Welding Process Using the Finite Element Method Coupled with a Genetic Algorithm–Based Identification of Uncertain Input Parameters
S. Bag
A. De
OriginalPaper 26 July 2008 Pages: 2698 - 2710
Study of the Porosity in Plasma-Sprayed Alumina through an Innovative Three-Dimensional Simulation of the Coating Buildup
S. Beauvais
V. Guipont
R. Saenger
OriginalPaper 18 July 2008 Pages: 2711 - 2724
Studies on the Mechanical Alloying of Ni-Fe-Co Powders and Its Explosive Compaction
S.K. Vajpai
R.K. Dube
A. Tewari
OriginalPaper 30 July 2008 Pages: 2725 - 2735
Numerical Simulation of Infiltration and Solidification Processes for Squeeze Cast Al Composites with Parametric Study
C.K. Jung
J.H. Jang
K.S. Han
OriginalPaper 13 August 2008 Pages: 2736 - 2748
An Investigation on the Interface in a NiTi Short-Fiber-Reinforced 6061 Aluminum Composite by Transmission Electron Microscope
Yi Liu
Basem Al-Matar
Golam Newaz
OriginalPaper 11 September 2008 Pages: 2749 - 2759
Patterns of Recrystallization in Warm- and Hot-Deformed AA6022
S. Raveendra
S. Mishra
I. Samajdar
OriginalPaper 08 August 2008 Pages: 2760 - 2771
The Effect of Artificial Aging on Tensile Work Hardening Characteristics of a Cast Al-7 Pct Si-0.55 Pct Mg (A357) Alloy
M. Tiryakioğlu
N.D. Alexopoulos
OriginalPaper 12 August 2008 Pages: 2772 - 2780
Formability of Ultrafine-Grain Mg Alloy AZ31B at Warm Temperatures
Q. Yang
A.K. Ghosh
OriginalPaper 08 August 2008 Pages: 2781 - 2796
Structural and Textural Characterization of the Substrate and Coated Layer in an Industrial Galvannealed Interstitial-Free Steel
A. Chakraborty
R.K. Ray
S. Sangal
Erratum 14 August 2008 Pages: 2797 - 2797

Volume 39, Issue 11

Emission of Dislocation Loops at Zero Indentation Load in Adhesive Nanocontacts

Branch Elimination during Heat Treatment of Titanium Alloys with a Colony-Alpha Microstructure

Static Strain Aging of Microstructural Constituents in Transformation-Induced-Plasticity Steel

Development of High-Strength Cu-Ni-Ti-B Multiphase Steel by Direct Air Cooling

Microstructure of Long-Term Aged IN617 Ni-Base Superalloy

Effect of Retained Austenite Stabilized via Quench and Partitioning on the Strain Hardening of Martensitic Steels

Oxygen Embrittlement and Time-Dependent Grain-Boundary Cracking of ALLVAC 718PLUS

Dislocation Configurations in an Extruded ZK60 Magnesium Alloy

Effects of Tempering on Microstructure, Hardness, Wear Resistance, and Fracture Toughness of Cr₃C₂/Steel Surface Composites Fabricated by High-Energy Electron-Beam Irradiation

Correlation of Microstructure with Hardness and Wear Resistance of Carbide-Reinforced Ferrous Surface Composites Fabricated by High-Energy Electron-Beam Irradiation

Mechanism of Hot Ductility Improvement of a Peritectic Steel Containing Vanadium Using Very-High-Temperature Compression

Analysis of Severe Plastic Deformation by Large Strain Extrusion Machining

Evolution of Structure, Composition, and Stress in Nanoporous Gold Thin Films with Grain-Boundary Cracks

Effect of Frequency, Environment, and Temperature on Fatigue Behavior of E319 Cast-Aluminum Alloy: Small-Crack Propagation

Effect of Frequency, Environment, and Temperature on Fatigue Behavior of E319 Cast Aluminum Alloy: Stress-Controlled Fatigue Life Response

Corrosion of 2205 Duplex Stainless Steel Weldment in Chloride Medium Containing Sulfate-Reducing Bacteria

Development of a Three-Dimensional Heat-Transfer Model for the Gas Tungsten Arc Welding Process Using the Finite Element Method Coupled with a Genetic Algorithm–Based Identification of Uncertain Input Parameters

Study of the Porosity in Plasma-Sprayed Alumina through an Innovative Three-Dimensional Simulation of the Coating Buildup

Studies on the Mechanical Alloying of Ni-Fe-Co Powders and Its Explosive Compaction

Numerical Simulation of Infiltration and Solidification Processes for Squeeze Cast Al Composites with Parametric Study

An Investigation on the Interface in a NiTi Short-Fiber-Reinforced 6061 Aluminum Composite by Transmission Electron Microscope

Patterns of Recrystallization in Warm- and Hot-Deformed AA6022

The Effect of Artificial Aging on Tensile Work Hardening Characteristics of a Cast Al-7 Pct Si-0.55 Pct Mg (A357) Alloy

Formability of Ultrafine-Grain Mg Alloy AZ31B at Warm Temperatures

Structural and Textural Characterization of the Substrate and Coated Layer in an Industrial Galvannealed Interstitial-Free Steel

Navigation