1. Interfacial segregation and influence of antiphase boundaries on rafting in a γ/γ′ alloy

   • C. Y. Chen
   • W. M. Stobbs

   OriginalPaper Pages: 733 - 740

2. A single-grain approach applied to the modeling of recrystallization kinetics for cold-rolled single-phase metals

   • S. P. Chen
   • S. Van Der Zwaag

   OriginalPaper Pages: 741 - 749

3. Evolution of secondary phases in Cr-V low-alloy steels during aging

   • J. Janovec
   • A. Vyrostková
   • H. J. Grabke

   OriginalPaper Pages: 751 - 759

4. Shape memory properties of Ni-Ti based melt-spun ribbons

   • R. Santamarta
   • E. Cesari
   • T. Goryczka

   OriginalPaper Pages: 761 - 770

5. Effect of broaching on high-temperature fatigue behavior in notched specimens of INCONEL 718

   • T. Connolley
   • M. J. Starink
   • P. A. S. Reed

   OriginalPaper Pages: 771 - 783

6. Low-cycle fatigue behavior of ULTIMET® alloy

   • L. Jiang
   • C. R. Brooks
   • D. L. Klarstrom

   OriginalPaper Pages: 785 - 796

7. Deformation and damage mechanisms of zinc coatings on hot-dip galvanized steel sheets: Part I. Deformation modes

   • Rodolphe Parisot
   • Samuel Forest
   • Jean-Michel Mataigne

   OriginalPaper Pages: 797 - 811

8. Deformation and damage mechanisms of zinc coatings on hot-dip galvanized steel sheets: Part II. Damage modes

   • Rodolphe Parisot
   • Samuel Forest
   • Jean-Michel Mataigne

   OriginalPaper Pages: 813 - 823

9. High-strain-rate superplastic behavior of equal-channel angular-pressed 5083 Al-0.2 wt pct Sc

   • Dong Hyuk Shin
   • Duck-Young Hwang
   • Kyung-Tae Park

   OriginalPaper Pages: 825 - 837

10. Temperature evolution and life prediction in fatigue of superalloys

    • L. Jiang
    • H. Wang
    • D. L. Klarstrom

    OriginalPaper Pages: 839 - 848

11. Hydrogen trap states in ultrahigh-strength AERMET 100 steel

    • Daoming Li
    • Richard P. Gangloff
    • John R. Scully

    OriginalPaper Pages: 849 - 864

12. Effect of surface modification of high-density polyethylene by direct current and radio frequency glow discharge on wetting and adhesion characteristics

    • S. Bhowmik
    • T. K. Chaki
    • L. Dorn

    OriginalPaper Pages: 865 - 877

13. Assessment of the origin of porosity in electron-beam-welded TA6V plates

    • N. Gouret
    • E. Ollivier
    • B. Miguet

    OriginalPaper Pages: 879 - 889

14. Effects of prehafnizing on morphological development of a chemical vapor deposition aluminide coating formed on single-crystal Ni-based superalloy

    • L. M. He
    • J. D. Meyer
    • W. Y. Lee

    OriginalPaper Pages: 891 - 897

15. Semi-solid rapid compression testing of spray-formed hypereutectic Al-Si alloys

    • S. C. Hogg
    • H. V. Atkinson
    • P. Kapranos

    OriginalPaper Pages: 899 - 910

16. The effect of temperature, matrix alloying and substrate coatings on wettability and shear strength of Al/Al₂O₃ couples

    • N. Sobczak
    • M. Ksiazek
    • B. Mikulowski

    OriginalPaper Pages: 911 - 923

17. Textural changes during β→α and α→β→α transformations in a near-α titanium alloy

    • Satyam Suwas
    • A. K. Singh

    OriginalPaper Pages: 925 - 938

18. Effect of grain-boundary characteristics on castability of nickel-base superalloys

    • Jian Zhang
    • Robert F. Singer

    OriginalPaper Pages: 939 - 946

19. Mechanical behavior of a cryomilled nanostructured Al-7.5 pct Mg alloy

    • B. Q. Han
    • Z. Zhang
    • F. A. Mohamed

    Communications Pages: 947 - 949

20. Effect of thermomechanical processing on grain structure development in a twin-belt strip cast automotive aluminum alloy

    • S. X. Girard
    • H. N. Azari
    • D. S. Wilkinson

    Communications Pages: 949 - 952

21. Resonant vibration behavior of an Al-3.8Cu-0.8Li-0.3Mg alloy

    • J. M. Song
    • B. H. Tan
    • L. H. Chen

    Communications Pages: 952 - 957

22. “Authors’ reply” to discussion of “Eutectic solidification of Al-Si alloys”

    • A. K. Dahle
    • S. D. McDonald
    • K. Nogita

    Erratum Pages: 959 - 959

23. Measurement and modeling of the electromagnetic response to phase transformation in steels

    • M. P. Papaelias
    • M. Strangwood
    • A. J. Peyton

    OriginalPaper Pages: 965 - 972

24. Effect of aging and deformation on the microstructure and properties of Fe-Ni-Ti maraging steel

    • A. Shekhter
    • H. I. Aaronson
    • E. V. Pereloma

    OriginalPaper Pages: 973 - 983

25. Effect of simulated thermal cycles on the microstructure of the heat-affected zone in HSLA-80 and HSLA-100 steel plates

    • M. Shome
    • O. P. Gupta
    • O. N. Mohanty

    OriginalPaper Pages: 985 - 996

26. The tensile response of a fine-grained AA5754 alloy produced by asymmetric rolling and annealing

    • H. Jin
    • D. J. Lloyd

    OriginalPaper Pages: 997 - 1006

27. Effects of temperature and shot peening on S-N behavior of a PM Ni-base superalloy UDIMET 720

    • J. Luo
    • P. Bowen

    OriginalPaper Pages: 1007 - 1016

28. Fracture behavior of thixoformed 357-T5 Al alloys

    • Chul Park
    • Sangshik Kim
    • Junghwan Lee

    OriginalPaper Pages: 1017 - 1027

29. Correlation of microstructure with hardness and wear resistance in (TiC,SiC)/stainless steel surface composites fabricated by high-energy electron-beam irradiation

    • Eunsub Yun
    • Yong Chan Kim
    • Nack J. Kim

    OriginalPaper Pages: 1029 - 1038

30. Mechanisms and modeling of cleavage fracture in simulated heat-affected zone microstructures of a high-strength low alloy steel

    • A. Lambert-Perlade
    • T. Sturel
    • A. Pineau

    OriginalPaper Pages: 1039 - 1053

31. Effects of an α-Al₂O₃ thin film on the oxidation behavior of a single-crystal Ni-based superalloy

    • Y. -F. Su
    • W. Y. Lee
    • D. W. Coffey

    OriginalPaper Pages: 1055 - 1065

32. Morphologies of silicon crystals solidified on a chill plate

    • R. P. Liu
    • D. M. Herlach
    • A. L. Greer

    OriginalPaper Pages: 1067 - 1073

33. Determination of volume fractions of texture components with standard distributions in euler space

    • Jae-Hyung Cho
    • A. D. Rollett
    • K. H. Oh

    OriginalPaper Pages: 1075 - 1086

34. The cut-groove technique to infer interfacial effects during hot rolling

    • S. Das
    • E. J. Palmiere
    • Immpetus I. C. Howard

    OriginalPaper Pages: 1087 - 1095

35. Effect of clustering of precipitates on grain growth

    • E. Flores
    • J. M. Cabrera
    • J. M. Prado

    OriginalPaper Pages: 1097 - 1103

36. Cr-Mo solid solutions forced by high-energy ball milling

    • J. D. Hahn
    • Fang Wu
    • P. Bellon

    OriginalPaper Pages: 1105 - 1111

37. Effects of preoxidation on the nucleation and growth behavior of chemically vapor-deposited α-Al₂O₃ on a single-crystal Ni-based superalloy

    • L. M. He
    • Y. -F. Su
    • M. J. Lance

    OriginalPaper Pages: 1113 - 1124

38. Hot explosive compaction of aluminum-nickelide composites

    • Laszlo J. Kecskes
    • Steven T. Szewczyk
    • Nikoloz M. Chikhradze

    OriginalPaper Pages: 1125 - 1131

39. Fabrication of carbide-particle-reinforced titanium aluminide-matrix composites by laser-engineered net shaping

    • Weiping Liu
    • J. N. DuPont

    OriginalPaper Pages: 1133 - 1140

40. A hybrid micromechanical-macroscopic model for the analysis of the tensile behavior of cavitating materials

    • P. D. Nicolaou
    • S. L. Semiatin

    OriginalPaper Pages: 1141 - 1149

41. Failure in internally pressurized bent tubes

    • Robin Stevenson
    • Boon-Chai Ng
    • Peter Polidoro

    OriginalPaper Pages: 1151 - 1158

42. Copper-zirconium tungstate composites exhibiting low and negative thermal expansion influenced by reinforcement phase transformations

    • Dorian K. Balch
    • David C. Dunand

    OriginalPaper Pages: 1159 - 1165

43. Some studies on the thermal-expansion behavior of c-fiber, SiC _p , and in-situ Mg₂Si-Reinforced AZ31 Mg alloy-Based hybrid composites

    • S. K. Thakur
    • B. K. Dhindaw
    • K. U. Kainer

    OriginalPaper Pages: 1167 - 1176