Nanotechnology: Scientific challenges and societal benefits and risks A. D. Romig Jr. OriginalPaper Pages: 3641 - 3648
An experimental and theoretical analysis of the phase equilibria in the Fe-Cr-V-C system J. BratbergK. Frisk OriginalPaper Pages: 3649 - 3663
Experimental determination of solid-liquid interfacial energy for Zn solid solution in equilibrium with the Zn-Al eutectic liquid K. KeşlioğluN. Maraşli OriginalPaper Pages: 3665 - 3672
Thermodynamic investigations of Cr3C2 and reassessment of the Cr-C system L. D. TengK. G. LuS. Seetharaman OriginalPaper Pages: 3673 - 3680
Characterization of retrogression and reaging behavior of 8090 Al-Li-Cu-Mg-Zr alloy K. S. GhoshK. DasU. K. Chatterjee OriginalPaper Pages: 3681 - 3691
Role of carbon and alloying elements in the formation of bainitic ferrite M. HillertL. HöglundJ. Ågren OriginalPaper Pages: 3693 - 3700
Widmanstätten ferrite plate formation in low-carbon steels Dominic PhelanRian Dippenaar OriginalPaper Pages: 3701 - 3706
Effect of ternary additions on the structure and properties of coatings produced by a high aluminum galvanizing bath M. RanjanR. TewariV. K. Vasudevan OriginalPaper Pages: 3707 - 3720
Variability of large-crack fatigue-crack-growth thresholds in structural alloys Kwai S. Chan OriginalPaper Pages: 3721 - 3735
Inclusion-controlled fatigue properties of 1800 MPA-class spring steels Y. FuruyaT. AbeS. Matsuoka OriginalPaper Pages: 3737 - 3744
A semiautomated electron backscatter diffraction technique for extracting reliable twin statistics B. L. HenrieT. A. MasonB. L. Hansen OriginalPaper Pages: 3745 - 3751
In-situ microfracture observation of strip-cast Zr-Ti-Cu-Ni-Be bulk metallic glass alloys Jung G. LeeDong-Geun LeeNack J. Kim OriginalPaper Pages: 3753 - 3761
Application of a substructure-based hardening model to copper under loading path changes S. MaheshC. N. ToméI. J. Beyerlein OriginalPaper Pages: 3763 - 3774
Brass-type shear bands and their influence on texture formation H. PaulA. MorawiecJ. J. Fundenberger OriginalPaper Pages: 3775 - 3786
On the isotropy of the dynamic mechanical and failure properties of swaged tungsten heavy alloys D. RittelR. LevinA. Dorogoy OriginalPaper Pages: 3787 - 3795
Fracture behavior of thick-section weldment in Fe-12Cr-12Ni-10Mn-0.24N stainless steel at liquid helium temperature Y. ShindoK. Horiguchi OriginalPaper Pages: 3797 - 3802
Texture evolution and mechanical anisotropy in dual-phase Ti3Al-based alloy loaded at 700 °C to 1000 °C K. L. YangJ. C. HuangY. N. Wang OriginalPaper Pages: 3803 - 3815
Tensile test behavior of the eutectic Sn-Ag solder joint in ball grid array assemblies M. S. YehJ. T. Chiang OriginalPaper Pages: 3817 - 3821
Failure mode analysis and a mechanism for hot-ductility improvement in the Nb-microalloyed steel Faramarz ZarandiSteven Yue OriginalPaper Pages: 3823 - 3832
Modeling of distortion after densification during liquid-phase sintering Chantal BientKara L. LencoskiRandall M. German OriginalPaper Pages: 3833 - 3841
Development and validation of a thermal model of the direct chill casting of AZ31 magnesium billets H. HaoD. M. MaijerS. Hibbins OriginalPaper Pages: 3843 - 3854
Microstructure characterization and creep deformation of an Al-10 Wt Pct Ti-2 Wt Pct Cu nanocomposite R. W. HayesP. B. BerbonR. S. Mishra OriginalPaper Pages: 3855 - 3861
Room-temperature cleavage fracture of FeMnAlC steels O. AcselradL. C. PereiraJ. -L. Delplancke Communications Pages: 3863 - 3866