1. A 500 °C isothermal section for the Al-Au-Cu system

   • F. C. Levey
   • M. B. Cortie
   • L. A. Cornish

   OriginalPaper Pages: 987 - 993

2. Phase equilibria of the ternary Ni-Cr-Zr system and interfacial reactions in the Ni-Cr/Zr couples

   • Shyh-Jye Luo
   • Chao-Hong Wang
   • Sinn-Wen Chen

   OriginalPaper Pages: 995 - 1002

3. Energy of the Pb{111}‖Al{111} interface

   • Zhan Shi
   • Jennifer B. Lowekamp
   • Paul Wynblatt

   OriginalPaper Pages: 1003 - 1007

4. Decomposition of ferrite in commercial superduplex stainless steel weld metals; microstructural transformations above 700 °C

   • A. Gregori
   • J. -O. Nilsson

   OriginalPaper Pages: 1009 - 1018

5. The production of ultrafine ferrite in low-carbon steel by strain-induced transformation

   • M. R. Hickson
   • P. J. Hurley
   • P. D. Hodgson

   OriginalPaper Pages: 1019 - 1026

6. Finite element modeling of the morphology of β to α phase transformation in Ti-6Al-4V alloy

   • I. Katzarov
   • S. Malinov
   • W. Sha

   OriginalPaper Pages: 1027 - 1040

7. Crystallization kinetics of amorphous magnesium-rich magnesium-copper and magnesium-nickel alloys

   • A. T. W. Kempen
   • H. Nitsche
   • E. J. Mittemeijer

   OriginalPaper Pages: 1041 - 1050

8. In-situ measurement of continuous cooling β → α transformation behavior of CP-Ti

   • S. K. Kim
   • J. K. Park

   OriginalPaper Pages: 1051 - 1056

9. Precipitation of austenite particles at grain boundaries during aging of Fe-Mn-Ni steel

   • Seung-Ho Mun
   • Masashi Watanabe
   • Hu-Chul Lee

   OriginalPaper Pages: 1057 - 1067

10. Microstructural evolution of a shaped-charge liner and target materials during ballistic tests

    • Seong Lee
    • Moon-Hee Hong
    • Woon Hyoung Baek

    OriginalPaper Pages: 1069 - 1074

11. Theory for growth of needle-shaped particles in multicomponent systems

    • P. E. J. Rivera-Díaz-Del-Castillo
    • H. K. D. H. Bhadeshia

    OriginalPaper Pages: 1075 - 1081

12. Symmetry-breaking transitions in equilibrium shapes of coherent precipitates: Effect of elastic anisotropy and inhomogeneity

    • R. Sankarasubramanian
    • C. S. Jog
    • T. A. Abinandanan

    OriginalPaper Pages: 1083 - 1090

13. Hot rolling texture development in CMnCrSi dual-phase steels

    • T. Waterschoot
    • L. Kestens
    • B. C. De Cooman

    OriginalPaper Pages: 1091 - 1102

14. Analysis of steady-state thermal creep of Zr-2.5Nb pressure tube material

    • N. Christodoulou
    • C. K. Chow
    • R. J. Klassen

    OriginalPaper Pages: 1103 - 1115

15. Shrinkage and splitting of microcracks under pressure simulated by the finite-element method

    • Peizhen Huang
    • Zhonghua Li
    • Jun Sun

    OriginalPaper Pages: 1117 - 1124

16. Toughness-strength relations in the overaged 7449 al-based alloy

    • N. Kamp
    • I. Sinclair
    • M. J. Starink

    OriginalPaper Pages: 1125 - 1136

17. The effect of grain size on the ambient temperature creep deformation behavior of a beta Ti-14.8 V alloy

    • Anand Ramesh
    • Sreeramamurthy Ankem

    OriginalPaper Pages: 1137 - 1144

18. Equilibrium solid solubility of silicon in silver

    • L. Weber

    OriginalPaper Pages: 1145 - 1150

19. A critical-strain criterion for hydrogen embrittlement of cold-drawn, ultrafine pearlitic steel

    • D. G. Enos
    • J. R. Scully

    OriginalPaper Pages: 1151 - 1166

20. The effects of test temperature, temper, and alloyed copper on the hydrogen-controlled crack growth rate of an Al-Zn-Mg-(Cu) alloy

    • George A. Young Jr.
    • John R. Scully

    OriginalPaper Pages: 1167 - 1181

21. Effects of metal vapor on electron temperature in helium gas tungsten arcs

    • Hidenori Terasaki
    • Manabu Tanaka
    • Masao Ushio

    OriginalPaper Pages: 1183 - 1188

22. Toward prediction of microstructural evolution during laser surface alloying

    • S. S. Babu
    • S. A. David
    • K. D. Parks

    OriginalPaper Pages: 1189 - 1200

23. Surface engineering of timet 550 with oxygen to form a rutile-based, wear-resistant coating

    • C. Boettcher
    • T. Bell
    • H. Dong

    OriginalPaper Pages: 1201 - 1211

24. Control of surface carburization and improvement of dynamic fracture behavior in tungsten heavy alloys

    • Sug-Woo Jung
    • Suk-Joong L. Kang
    • Woon-Hyung Baek

    OriginalPaper Pages: 1213 - 1219

25. Microstructural characteristics of Ni-Sb eutectic alloys under substantial undercooling and containerless solidification conditions

    • X. J. Han
    • B. Wei

    OriginalPaper Pages: 1221 - 1228

26. Cellular array morphology during directional solidification

    • S. N. Tewari
    • Y-Husuan Weng
    • R. Trivedi

    OriginalPaper Pages: 1229 - 1243

27. Formation of white layers in steels by machining and their characteristics

    • S. Akcan
    • WI. S. Shah
    • H. T. Y. Yang

    OriginalPaper Pages: 1245 - 1254

28. Spheroidization cycles for medium carbon steels

    • James M. O’Brien
    • William F. Hosford

    OriginalPaper Pages: 1255 - 1261

29. A study on inhomogeneous distribution of temper graphite particles in strip-cast Fe-C-Si alloys

    • J. M. Song
    • T. S. Lui
    • L. H. Chen

    OriginalPaper Pages: 1263 - 1273

30. Formation of a TiB₂-reinforced copper-based composite by mechanical alloying and hot pressing

    • S. J. Dong
    • Y. Zhou
    • Y. W. Shi

    OriginalPaper Pages: 1275 - 1280

31. Microstructures and mechanical properties of (Ir,Rh)₇₅Nb₁₅Ni₁₀ alloys

    • Y. F. Gu
    • Y. Yamabe-Mitarai
    • H. Harada

    Communications Pages: 1281 - 1283

32. The gibbs-thomson effect in dilute binary systems

    • MA Qian

    Communications Pages: 1283 - 1287

33. Infrared imaging during low-cycle fatigue of HR-120 alloy

    • H. Wang
    • L. Jiang
    • D. L. Klarstrom

    Communications Pages: 1287 - 1292

34. Effect of carbon addition on tribological properties of Fe-Al alloys

    • S. M. Zhu
    • X. S. Guan
    • K. Iwasaki

    Communications Pages: 1292 - 1295

35. The effects of test temperature, temper, and alloyed copper on the hydrogen-controlled crack growth rate of an Al-Zn-Mg-(Cu) alloy

    • George A. Young Jr.
    • John R. Scully

    Erratum Pages: 1297 - 1297