Kinetics and phase transformation evaluation of Fe-Zn-Al mechanically alloyed phases Oswald N. C. UwakwehZhentong Liu OriginalPaper Pages: 517 - 525
Solid-solution structure and the weakly first-order displacive transformation in Fe-Pd alloys J. J. FeltenT. J. KinkusJ. B. Cohen OriginalPaper Pages: 527 - 536
Thermodynamic study of the low-temperature phase B19′ and the martensitic transformation in near-equiatomic Ti-Ni shape memory alloys Weijia Tang OriginalPaper Pages: 537 - 544
Aging and tempering behavior of iron-nickel-carbon and iron-carbon martensite M. J. Van GenderenM. IsacE. J. Mittemeijer OriginalPaper Pages: 545 - 561
A theory for solute impurity diffusion, which considers engel-brewer valences, balancing the fermi energy levels of solvent and solute, and differences in zero point energy Vladimyr BurachynskyJ. R. Cahoon OriginalPaper Pages: 563 - 582
A modified “Hole” theory for solute impurity diffusion in liquid metals J. R. Cahoon OriginalPaper Pages: 583 - 593
Microstructure and mechanisms of cyclic deformation of aluminum single crystals at 77 K M. E. KassnerM. A. WallM. A. Delos-Reyes OriginalPaper Pages: 595 - 609
The effect of SiC particle reinforcement on the creep behavior of 2080 aluminum P. E. KrajewskiJ. E. AllisonJ. W. Jones OriginalPaper Pages: 611 - 620
Effect of alloying additions on secondary hardening behavior of Mo-containing steels H. KwonJ. H. LeeH. R. Yang OriginalPaper Pages: 621 - 627
Quasi-steady-state creep crack growth in a 3.5NiCrMoV steel S. H. RyuJin YuS. H. Hong OriginalPaper Pages: 629 - 635
Microstructural modification of plain carbon steels irradiated by high-energy electron beam Dongwood SuhSunghak LeeYangmo Koo OriginalPaper Pages: 637 - 647
Effect of phosphorus on the microstructure and stress rupture properties in an Fe-Ni-Cr base superalloy W. R. SunS. R. GuoZ. Q. Hu OriginalPaper Pages: 649 - 654
Crystallographic study of fatigue cracking in Ni3Al(CrB) single crystal G. P. ZhangZ. G. WangS. D. Wu OriginalPaper Pages: 665 - 672
Microstructural features of cracking in autogenous beryllium weldments J. D. CottonR. D. Field OriginalPaper Pages: 673 - 680
Effect of silicon content and carbon addition on primary recrystallization of Fe-3 pct si Shozaburo NakashimaKunihide TakashimaJiro Harase OriginalPaper Pages: 681 - 687
A new nickel-aluminum bronze alloy with low magnetic permeability P. Wenschot OriginalPaper Pages: 689 - 697
Experimental study of the kinetics of transient liquid phase solidification reaction in electroplated gold-tin layers on copper Ramnath VenkatramanJames R. WilcoxStephen R. Cain OriginalPaper Pages: 699 - 706
On the kinetics of carbide precipitation during reaction between graphite and Fe-Ti liquids under microgravity Z. LiuH. Fredriksson OriginalPaper Pages: 707 - 719
Discussion of “a study on morphology and plate mean dimensions in Fe-Ni and Fe-Ni-Cr alloys” V. RaghavanR. Datta Communications Pages: 721 - 721
Decagonal quasicrystal and related crystalline phases in Mn-Ga alloys with 52 to 63 a/o Ga J. S. WuK. H. Kuo OriginalPaper Pages: 729 - 742
Mössbauer effect study of mechanically alloyed γ and Γ1 Fe-Zn intermediate phases Zhentong LiuOswald N. C. Uwakweh OriginalPaper Pages: 743 - 747
Grain boundary mobility during recrystallization of copper R. A. VandermeerD. Juul JensenE. Woldt OriginalPaper Pages: 749 - 754
On the blister formation in copper alloys due to the helium ion implantation D. MorenoD. Eliezer OriginalPaper Pages: 755 - 762
High-temperature crack growth in 304 stainless steel under mixed-mode loading conditions W. E. ChurleyJ. C. Earthman OriginalPaper Pages: 763 - 773
Secondary hardening and fracture behavior in alloy steels containing Mo, W, and Cr H. KwonK. B. LeeH. R. Yang OriginalPaper Pages: 775 - 784
Crystallographic analysis of the influence of stress state on earing behavior in deep drawing of face-centered cubic metals S. Y. LiX. M. ZhangG. Gottstein OriginalPaper Pages: 785 - 793
Room-temperature deformation behavior of directionally solidified multiphase Ni-Fe-Al alloys A. MisraR. Gibala OriginalPaper Pages: 795 - 807
Dry sliding wear response of some bearing alloys as influenced by the nature of microconstituents and sliding conditions B. K. Prasad OriginalPaper Pages: 809 - 815
The effect of hydrogen on the fracture toughness of alloy X-750 Douglas M. SymonsAnthony W. Thompson OriginalPaper Pages: 817 - 823
Mechanisms of ambient temperature fatigue crack growth in Ti-46.5Al-3Nb-2Cr-0.2W B. D. WorthJ. M. LarsenJ. W. Jones OriginalPaper Pages: 825 - 835
Reaction diffusion and phase equilibria in the V-N system C. TeichmannW. LengauerM. Bohn OriginalPaper Pages: 837 - 842
Room-temperature diffusion in Cu/Ag thin-film couples caused by anodic dissolution Denny A. JonesAlan F. JankowskiGail A. Davidson OriginalPaper Pages: 843 - 850
X-ray and transmission electron microscopy investigation of strain in a nitrided steel: No evidence of plastic deformation L. BarrallierJ. -M. SprauelA. Charai OriginalPaper Pages: 851 - 857
Convection and channel formation in solidifying Pb-Sn alloys Michael I. BergmanDavid R. FearnMargarita C. Shannon OriginalPaper Pages: 859 - 866
On the transition from pushing to engulfment during directional solidification of the particle-reinforced aluminum-based metal-matrix composite 2014 + 10 Vol Pct Al2O3 U. HechtS. Rex OriginalPaper Pages: 867 - 874
The influence of convection during solidification on fragmentation of the mushy zone of a model alloy C. J. ParadiesR. N. SmithM. E. Glicksman OriginalPaper Pages: 875 - 883
An investigation of the effect of texture on the high-temperature flow behavior of an orthorhombic titanium aluminide alloy P. D. NicolaouS. L. Semiatin OriginalPaper Pages: 885 - 893
Consolidation of nanostructured metal powders by rapid forging: Processing, modeling, and subsequent mechanical behavior G. R. ShaikW. W. Milligan OriginalPaper Pages: 895 - 904