1. Foreword

   • Fernand Marquis

   EditorialNotes Pages: 2069 - 2070

2. Synthesis ofin situ TiB₂/TiN ceramic matrix composites from dense BN-Ti and BN-Ti-Ni powder blends

   • F. Olevsky
   • P. Mogilevsky
   • I. Gotman

   OriginalPaper Pages: 2071 - 2079

3. The use of an electric field as a processing parameter in the combustion synthesis of ceramics and composites

   • Z. A. Munir

   OriginalPaper Pages: 2080 - 2085

4. Solid-state diffusion-based processing kinetics for uniaxial self-propagating high-temperature synthesis of MoSi₂

   • Robert W. Bartlett
   • Keith A. Prisbrey

   OriginalPaper Pages: 2086 - 2093

5. On the role of magnesium and silicon in the formation of alumina from aluminum alloys by means of DIMOX processing

   • Liu Yang
   • Degui Zhu
   • Jian Zhang

   OriginalPaper Pages: 2094 - 2099

6. Formation of structural intermetallics by reactive metal penetration of Ti and Ni oxides and aluminates

   • William G. Fahrenholtz
   • Kevin G. Ewsuk
   • Antoni P. Tomsia

   OriginalPaper Pages: 2100 - 2104

7. Interdiffusion in the MgO-Al₂O₃ spinel with or without some dopants

   • P. Zhang
   • T. DebRoy
   • S. Seetharaman

   OriginalPaper Pages: 2105 - 2114

8. Reactive atomization of silicon to formin situ oxide sintering aids

   • Y. Wu
   • X. Zeng
   • J. M. Schoenung

   OriginalPaper Pages: 2115 - 2121

9. Microstructure and properties of Al₂O₃-Al(Si) and Al₂O₃-Al(Si)-Si composites formed byin situ reaction of Al with aluminosilicate ceramics

   • Kevin G. Ewsuk
   • S. Jill Glass
   • William G. Fahrenholtz

   OriginalPaper Pages: 2122 - 2129

10. Pressure-assisted reactive synthesis of titanium aluminides from dense 50Al-50Ti elemental powder blends

    • E. Paransky
    • E. Y. Gutmanas
    • M. Koczak

    OriginalPaper Pages: 2130 - 2139

11. Dense CoAl-based alloys with improved ductility: Solid-state synthesis and microstructure control

    • L. Farber
    • E. Y. Gutmanas
    • M. J. Koczak

    OriginalPaper Pages: 2140 - 2150

12. Microstructure and phase identification in type 304 stainless steel-zirconium alloys

    • Daniel P. Abraham
    • Sean M. McDeavitt
    • Jangyul Park

    OriginalPaper Pages: 2151 - 2159

13. Mössbauer spectroscopy study of the aging and tempering of high nitrogen quenched Fe-N alloys: Kinetics of formation of Fe₁₆N₂ nitride by interstitial ordering in martensite

    • I. Fall
    • J. -M. R. Genin

    OriginalPaper Pages: 2160 - 2177

14. The role of coincident site lattice boundaries during selective growth in interstitial-free steels

    • Peter Gangli
    • Leo Kestens
    • John J. Jonas

    OriginalPaper Pages: 2178 - 2186

15. Thermoelastic martensite and shape memory effect in ductile Cu-Al-Mn alloys

    • R. Kainuma
    • S. Takahashi
    • K. Ishida

    OriginalPaper Pages: 2187 - 2195

16. Structural stability of super duplex stainless weld metals and its dependence on tungsten and copper

    • J. -O. Nilsson
    • T. Huhtala
    • A. Wilson

    OriginalPaper Pages: 2196 - 2208

17. Modeling of ferrite growth in nodular cast iron

    • Magnus Wessén
    • Ingvar L. Svensson

    OriginalPaper Pages: 2209 - 2220

18. Microstructural development of a gas-atomized and hot-pressed super-α₂ alloy

    • R. Xu
    • Y. Y. Cui
    • Z. Q. Hu

    OriginalPaper Pages: 2221 - 2228

19. Thermodynamic and kinetic study of diffusion paths in the system Cu-Fe-Ni

    • K. J. Rönkä
    • A. A. Kodentsov
    • F. J. J. Van Loo

    OriginalPaper Pages: 2229 - 2238

20. High-temperature low-cycle fatigue of a gamma titanium aluminide alloy Ti-46Al-2Nb-2Cr

    • G. Malakondaiah
    • T. Nicholas

    OriginalPaper Pages: 2239 - 2251

21. An investigation by interactive electron backscatter pattern analysis of processing and superplasticity in an aluminum-magnesium alloy

    • T. R. McNelley
    • M. E. McMahon

    OriginalPaper Pages: 2252 - 2262

22. Fatigue and fracture behavior of Nb fiber-reinforced MoSi₂ composites

    • W. O. Soboyejo
    • F. Ye
    • D. S. Schwartz

    OriginalPaper Pages: 2263 - 2273

23. Deformation behavior of an Al-3.37 Wt Pct Li alloy

    • A. Thakur
    • B. P. Kashyap
    • M. K. Malik

    OriginalPaper Pages: 2274 - 2284

24. Investigation of the reaction zone between TiAl and Mo

    • F. -Y. Hsu
    • G. -X. Wang
    • F. Pirwitz

    OriginalPaper Pages: 2285 - 2292

25. Quenching C60 fullerene into diamond in the Fe-C alloy system by laser treatment

    • Changping Li
    • Bingqing Wei
    • Dehai Wu

    OriginalPaper Pages: 2293 - 2296

26. Wear-resistant coatings produced by shock-wave compaction of powders

    • A. A. Kiiski
    • P. R. Ruuskanen
    • J. B. Rubin

    OriginalPaper Pages: 2297 - 2304

27. Effect of grain refinement on the fluidity of two commercial Al-Si foundry alloys

    • A. K. Dahle
    • P. A. Tøndel
    • L. Arnberg

    OriginalPaper Pages: 2305 - 2313

28. Modeling of microsegregation in macrosegregation computations

    • H. Combeau
    • J. -M. Drezet
    • M. Rappaz

    OriginalPaper Pages: 2314 - 2327

29. Directional solidification of white cast iron

    • J. S. Park
    • J. D. Verhoeven

    OriginalPaper Pages: 2328 - 2337

30. Quantitative characterization of the surface topography of rolled sheets by laser scanning microscopy and fourier transformation

    • Liv Gjønnes

    OriginalPaper Pages: 2338 - 2346

31. Orientation selective recrystallization of nonoriented electrical steels

    • L. Kestens
    • J. J. Jonas
    • E. Aernoudt

    OriginalPaper Pages: 2347 - 2358

32. Theoretical calculation of the stress-strain behavior of dual-phase metals with randomly oriented spheroidal inclusions

    • A. Bhattacharyya
    • G. J. Weng

    OriginalPaper Pages: 2359 - 2365

33. The effect of volume percent and morphology of phases on the damping behavior of epoxy/aluminum composites

    • Jyothi G. Rao
    • Sreeramamurthy Ankem

    OriginalPaper Pages: 2366 - 2373

34. Synthesis of nanocrystalline titanium carbide alloy powders by mechanical solid state reaction

    • M. Sherif El-Eskandarany

    OriginalPaper Pages: 2374 - 2382

35. Nanoscale brass/steel multilayer composites produced by cold rolling

    • Satyam S. Sahay
    • Kakkaveri S. Ravichandran
    • J. Gerald Byrne

    Communication Pages: 2383 - 2385

36. Wear behavior of aluminum-based metal matrix composites reinforced with a preform of aluminosilicate fiber

    • S. C. Tjong
    • H. Z. Wang
    • S. Q. Wu

    Communication Pages: 2385 - 2389