1. Foreword

   • James C. Earthman
   • Kwai S. Chan

   EditorialNotes Pages: 828 - 828

2. Creep deformation and crack growth behavior of a single-crystal nickel-base superalloy

   • S. J. Moss
   • G. A. Webster
   • E. Fleury

   OriginalPaper Pages: 829 - 837

3. Time-dependent, environmentally assisted crack growth in nicalon-fiber-reinforced SiC composites at elevated temperatures

   • C. H. Henager
   • R. H. Jones
   • R. Bordia

   OriginalPaper Pages: 839 - 849

4. Mechanisms of high-temperature fatigue failure in alloy 800H

   • K. Bhanu Sankara Rao
   • H. Schuster
   • G. R. Halford

   OriginalPaper Pages: 851 - 861

5. Effect of Fe on ductility and cavitation in the superplastic Zn-22 Pct Al eutectoid

   • Xing-Gang Jiang
   • Susan T. Yang
   • Farghalli A. Mohamed

   OriginalPaper Pages: 863 - 872

6. The characteristics of cavitation in superplastic metals and ceramics

   • Yan Ma
   • Terence G. Langdon

   OriginalPaper Pages: 873 - 878

7. On the influence of grain morphology on creep deformation and damage mechanisms in directionally solidified and oxide dispersion strengthened superalloys

   • B. DeMestral
   • G. Eggeler
   • H. -J. Klam

   OriginalPaper Pages: 879 - 890

8. Effect of multiaxial stresses on creep damage of 316 stainless steel weldments

   • Yu-Hsian Hsiao
   • Hongyan Zhang
   • Glenn S. Daehn

   OriginalPaper Pages: 891 - 900

9. The inter-relationship between grain boundary sliding and cavitation during creep of polycrystalline copper

   • Akwasi Ayensu
   • Terence G. Langdon

   OriginalPaper Pages: 901 - 907

10. Bridge toughening enhancement in double-notched MoSi₂/Nb model composites

    • S. M. Pickard
    • A. K. Ghosh

    OriginalPaper Pages: 909 - 921

11. Neutron diffraction study of austempered ductile iron

    • C. S. Choi
    • W. Sharpe
    • R. J. Fields

    OriginalPaper Pages: 923 - 928

12. Electron microscope study of Al-Fe-Si intermetallics in 6201 aluminum alloy

    • M. H. Mulazimoglu
    • A. Zaluska
    • F. Paray

    OriginalPaper Pages: 929 - 936

13. Ostwald ripening in ternary alloys

    • C. J. Kuehmann
    • P. W. Voorhees

    OriginalPaper Pages: 937 - 943

14. A new characterization method of the microstructure using the macroscopic composition gradient in alloys

    • Toru Miyazaki
    • Toshiyuki Koyama
    • Sengo Kobayashi

    OriginalPaper Pages: 945 - 949

15. The influence of niobium supersaturation in austenite on the static recrystallization behavior of low carbon microalloyed steels

    • E. J. Palmiere
    • C. I. Garcia
    • A. J. DeArdo

    OriginalPaper Pages: 951 - 960

16. Modeling of sequential reactions during micropyretic synthesis

    • V. Subramanian
    • M. G. Lakshmikantha
    • J. A. Sekhar

    OriginalPaper Pages: 961 - 972

17. A study on morphology and plate mean dimensions in Fe-Ni and Fe-Ni-Cr alloys

    • P. Visvesvaran

    OriginalPaper Pages: 973 - 980

18. Sputter-induced pits on {100} nickel surfaces

    • J. K. Steele
    • D. I. Potter

    OriginalPaper Pages: 981 - 993

19. The bauschinger effect in a SiC/Al composite

    • R. J. Arsenault
    • U. T. S. Pillai

    OriginalPaper Pages: 995 - 1001

20. High-temperature measurements of lattice parameters and internal stresses of a creep-deformed monocrystalline nickel-base superalloy

    • Horst Biermann
    • Marcus Strehler
    • Haël Mughrabi

    OriginalPaper Pages: 1003 - 1014

21. The embrittlement and de-embrittlement of grain boundaries in an Fe-Mn-Ni alloy due to grain boundary segregation of Mn

    • Nam-Hoe Heo
    • Hu-Chul Lee

    OriginalPaper Pages: 1015 - 1020

22. Temperature dependence of the intrinsic small fatigue crack growth behavior in ni-base superalloys based on measurement of crack closure

    • M. Okazaki
    • H. Yamada
    • S. Nohmi

    OriginalPaper Pages: 1021 - 1031

23. Identification of precipitate phases in a mechanically alloyed rapidly solidified Al-Fe-Ce alloy

    • M. L. Öveçoglu
    • C. Suryanarayana
    • W. D. Nix

    OriginalPaper Pages: 1033 - 1041

24. Micronecking and fracture in cavitated superplastic materials

    • Mohamed Zaki

    OriginalPaper Pages: 1043 - 1046

25. Friability and crushing strength of micrometer-size diamond abrasives used in microgrinding of optical glass

    • Yiyang Zhou
    • Toshio Takahashi
    • Paul D. Funkenbusch

    OriginalPaper Pages: 1047 - 1053

26. Thermodynamics and long-range order of nitrogen in γ′-Fe₄N_1-x

    • Bart J. Kooi
    • Marcel A. J. Somers
    • Eric J. Mittemeijer

    Physical Chemistry Pages: 1055 - 1061

27. An evaluation of the Fe-N phase diagram considering long-range order of N atoms in γ′-Fe₄N_1-x and ε-Fe₂N_1-z

    • Bart J. Kooi
    • Marcel A. J. Somers
    • Eric J. Mittemeijer

    Physical Chemistry Pages: 1063 - 1071

28. Theoretical treatment of nitriding and nitrocarburizing of iron

    • Hong Du
    • John ågren

    OriginalPaper Pages: 1073 - 1080

29. The breakdown of single-crystal solidification in high refractory nickel-base alloys

    • T. M. Pollock
    • W. H. Murphy

    OriginalPaper Pages: 1081 - 1094

30. Convection during thermally unstable solidification of Pb-Sn in a magnetic field

    • H. Song
    • S. N. Tewari
    • H. C. de Groh

    OriginalPaper Pages: 1095 - 1110

31. Time dependence of tip morphology during cellular/dendritic arrayed growth

    • H. Song
    • S. N. Tewari

    OriginalPaper Pages: 1111 - 1119

32. Microstructure and phase relations in a powder-processed Ti-22AI-12Nb Alloy

    • S. G. Kumar
    • R. G. Reddy

    OriginalPaper Pages: 1121 - 1126

33. The driving force for martensitic transformations in low alloy steels

    • V. Raghavan
    • Dara P. Antia

    Communications Pages: 1127 - 1132

34. Modeling iron enrichment in hot-dip galvanneal coatings on interstitial-free steels

    • P. R. Rios

    OriginalPaper Pages: 1132 - 1134