1. An isothermal section at 550 °C in the Al-Rich corner of the Al-Fe-Mn-Si system

   • G. Davignon
   • B. Verlinden
   • A. Serneels

   OriginalPaper Pages: 3357 - 3361

2. High-resolution transmission electron microscopy investigation of the face-centered cubic/hexagonal close-packed martensite transformation in Co-31.8 wt pct Ni alloy: Part 1. Plate interfaces and growth ledges

   • D. W. Bray
   • J. M. Howe

   OriginalPaper Pages: 3362 - 3370

3. High-resolution transmission electron microscopy investigation of the face-centered cubic/hexagonal close-packed martensite transformation in Co-31.8 wt pct Ni alloy: Part 2. Plate intersections, extended defects, and nucleation mechanisms

   • D. W. Bray
   • J. M. Howe

   OriginalPaper Pages: 3371 - 3380

4. A model describing neutron irradiation-induced segregation to grain boundaries in dilute alloys

   • R. G. Faulkner
   • Shenhua Song
   • P. E. J. Flewitt

   OriginalPaper Pages: 3381 - 3390

5. Preferential coarsening ofγ″ precipitates in INCONEL 718 during creep

   • Ming Gao
   • D. Gary Harlow
   • Shuchun Chen

   OriginalPaper Pages: 3391 - 3398

6. Austenite grain growth kinetics in Al-killed plain carbon steels

   • Matthias Militzer
   • E. Bruce Hawbolt
   • Alan Giumelli

   OriginalPaper Pages: 3399 - 3409

7. Modeling recovery and recrystallization kinetics in cold-rolled Ti-Nb stabilized interstitial-free steel

   • K. Mukunthan
   • E. B. Hawbolt

   OriginalPaper Pages: 3410 - 3423

8. The effect of metallic elements on the crystallization behavior of amorphous Fe-Si-B alloys

   • T. Naohara

   OriginalPaper Pages: 3424 - 3430

9. On the effect of stress on nucleation and growth of precipitates in an Al-Cu-Mg-Ag alloy

   • B. Skrotzki
   • G. J. Shiflet
   • E. A. Starke Jr.

   OriginalPaper Pages: 3431 - 3444

10. Crystallographic preferred orientation induced by cyclic rolling contact loading

    • A. P. Voskampk
    • E. J. Mittemeijer

    OriginalPaper Pages: 3445 - 3465

11. M₂C precipitates in isothermal tempering of high Co-Ni secondary hardening steel

    • Choong Hwa Yoo
    • Hyuck Mo Lee
    • John W. Morris Jr.

    OriginalPaper Pages: 3466 - 3472

12. Analysis of mean square penetration depth in grain boundary diffusion

    • Y. T. Chou
    • Y. Z. Li
    • C. T. Liu

    OriginalPaper Pages: 3473 - 3477

13. Hot deformation mechanisms of a solution-treated Al-Li-Cu-Mg-Zr alloy

    • G. Avramovic-Cingara
    • D. D. Perovic
    • H. J. McQueen

    OriginalPaper Pages: 3478 - 3490

14. Plastic zones and fatigue-crack closure under plane-strain double slip

    • Ken Gall
    • Huseyin Sehitoglu
    • Yavuz Kadioglu

    OriginalPaper Pages: 3491 - 3502

15. The plastic anisotropy of an Al-Li-Cu-Zr alloy extrusion in unidirectional deformation

    • M. T. Lyttle
    • J. A. Wert

    OriginalPaper Pages: 3503 - 3512

16. Characterization of the wear response of a modified zinc-based alloy vis-à-vis a conventional zinc-based alloy and a bearing bronze at a high sliding speed

    • B. K. Prasad
    • A. H. Yegneswaran
    • A. K. Patwardhan

    OriginalPaper Pages: 3513 - 3523

17. Influence of interstitials on the mechanical properties of metallic materials

    • R. E. Reed-Hill
    • C. V. Iswaran
    • M. J. Kaufman

    OriginalPaper Pages: 3524 - 3529

18. Effects of alkali-metal impurities on fracture toughness of 2090 Al-Li-Cu extrusions

    • E. D. Sweet
    • C. G. Bennett
    • R. B. Nethercott

    OriginalPaper Pages: 3530 - 3541

19. Manifestations of dynamic strain aging in soft-oriented NiAl single crystals

    • M. L. Weaver
    • M. J. Kaufman
    • R. D. Noebe

    OriginalPaper Pages: 3542 - 3557

20. The cracking mechanism of silicon particles in an A357 aluminum alloy

    • Jien-Wei Yeh
    • Wen-Pin Liu

    OriginalPaper Pages: 3558 - 3568

21. Thermodynamic activities and partial enthalpies of mixing in the solid solution of Fe in Ni₃Al

    • M. Albers
    • D. Kath
    • K. Hilpert

    OriginalPaper Pages: 3569 - 3575

22. Thermochemistry of the Ni-Hf system—Intermetallic phases

    • László Bencze
    • Klaus Hilpert

    OriginalPaper Pages: 3576 - 3590

23. Thermodynamic assessment of the Nb-N system

    • Weiming Huang

    OriginalPaper Pages: 3591 - 3600

24. Microstructural aspects of sulfide stress cracking in an API X-80 pipeline steel

    • H. F. López
    • R. Raghunath
    • L. Martinez

    OriginalPaper Pages: 3601 - 3611

25. Solidification of an alloy 625 weld overlay

    • J. N. DuPont

    OriginalPaper Pages: 3612 - 3620

26. Transient liquid-phase bonding in the NiAl/Cu/Ni system-A microstructural investigation

    • W. F. Gale
    • Y. Guan

    OriginalPaper Pages: 3621 - 3629

27. A model for coupled growth of reaction layers in reactive brazing of ZrO₂-toughened Al₂O₃

    • T. Torvund
    • Ø. Grong
    • J. H. Ulvensøen

    OriginalPaper Pages: 3630 - 3638

28. The wear behavior between hardfacing materials

    • Weite Wu
    • Lung-Tien Wu

    OriginalPaper Pages: 3639 - 3648

29. The growth and structure of thin oxide films on cerium ion-implanted nickel

    • F. Czerwinski
    • J. A. Szpunar
    • W. W. Smeltzer

    OriginalPaper Pages: 3649 - 3661

30. Influence of plastic deformation upon the half-width of engineering metallic materials in hard state

    • J. B. Li
    • H. B. Xu
    • Z. G. Wang

    OriginalPaper Pages: 3662 - 3668

31. Permeability of microporous carbon preforms

    • S. K. Datta
    • N. Simhai
    • M. Singh

    OriginalPaper Pages: 3669 - 3674

32. High-temperature deformation and failure of an orthorhombic titanium aluminide sheet material

    • P. D. Nicolaou
    • S. L. Semiatin

    OriginalPaper Pages: 3675 - 3681

33. Determination of hydrogen in titanium alloys by cold neutron prompt gamma activation analysis

    • Rick L. Paul
    • Richard M. Lindstrom
    • Wade J. Richards

    OriginalPaper Pages: 3682 - 3687

34. Synthesis of RuAl by reactive powder processing

    • I. M. Wolff

    OriginalPaper Pages: 3688 - 3699

35. Thermal expansion of metals reinforced with ceramic particles and microcellular foams

    • D. K. Balch
    • A. Mortensen
    • V. J. Michaud

    OriginalPaper Pages: 3700 - 3717

36. Microstructural changes in a mechanically alloyed Al-6.2Zn-2.5Mg-1.7Cu alloy (7010) with and without particulate SiC reinforcement

    • A. Bhaduri
    • V. Gopinathan
    • A. P. Miodownik

    OriginalPaper Pages: 3718 - 3726

37. Wear and friction behavior of metal impregnated microporous carbon composites

    • Gultekin Goller
    • D. P. Koty
    • A Tekin

    OriginalPaper Pages: 3727 - 3738

38. Reinforcement shape effects on the fracture behavior and ductility of particulate-reinforced 6061-Al matrix composites

    • S. G. Song
    • N. Shi
    • J. A. Roberts

    OriginalPaper Pages: 3739 - 3746

39. The behavior of internal markers in Ti-6Al-4V deformed in superplastic tension

    • P. L. Blackwell
    • P. S. Bate

    Communications Pages: 3747 - 3748