Microstructural study of the titanium alloy Ti-15Mo-2.7Nb-3Al-0.2Si (TIMETAL 21S) K. ChaudhuriJ. H. Perepezko OriginalPaper Pages: 1109 - 1118
η toG phase transformation in electrodeposited iron-zinc alloy coatings C. A. DrewienJ. I. GoldsteinA. R. Marder OriginalPaper Pages: 1119 - 1125
Computer simulation of diffusion in multiphase systems Anders EngströmLars HöglundJohn Ågren OriginalPaper Pages: 1127 - 1134
Interstitial precipitation in Fe-Cr-Al alloys W. S. SpearD. H. Polonis OriginalPaper Pages: 1135 - 1146
Fracture and the formation of sigma phase, M23C6, and austenite from delta-ferrite in an AlSl 304L stainless steel C. C. TsengY. ShenG. Krauss OriginalPaper Pages: 1147 - 1158
Tritium distribution at the crack tip of high-strength steels submitted to stress corrosion cracking A. M. BrassJ. ChêneJ. Gonzalez OriginalPaper Pages: 1159 - 1167
Creep and intergranular cracking of Ni-Cr-Fe-C in 360 °C argon Thomas M. AngeliuGary S. Was OriginalPaper Pages: 1169 - 1183
Hydride embrittlement in ZIRCALOY-4 plate: Part I. Influence of microstructure on the hydride embrittlement in ZIRCALOY-4 at 20 °C and 350 °C J. B. BaiC. PrioulD. François OriginalPaper Pages: 1185 - 1197
Hydride embrittlement in ZIRCALOY-4 plate: Part II. interaction between the tensile stress and the hydride morphology J. B. BaiN. JID. François OriginalPaper Pages: 1199 - 1208
Anisotropic plastic potentials for polycrystals and application to the design of optimum blank shapes in sheet forming F. BarlatK. ChungO. Richmond OriginalPaper Pages: 1209 - 1216
Relationships of slip morphology, microcracking, and fracture resistance in a lamellar TiAl-alloy K. S. ChanY-W. Kim OriginalPaper Pages: 1217 - 1228
Phosphorus and carbon segregation: Effects on fatigue and fracture of gas-carburized modified 4320 steel R. S. HydeG. KraussD. K. Matlock OriginalPaper Pages: 1229 - 1240
Superplastic behavior of two ultrahigh boron steels J. A. JiménezG. González-DoncelO. A. Ruano OriginalPaper Pages: 1241 - 1248
The effect of low gold concentrations on the creep of eutectic tin-lead joints P. A. KramerJ. GlazerJ. W. Morris OriginalPaper Pages: 1249 - 1257
Fiber strength and fiber/matrix bond strength in single crystal Al2O3 fiber reinforced Ni3Al based composites S. NourbakhshW. H. RheeH. Margolin OriginalPaper Pages: 1259 - 1265
Comparison of orthorhombic and alpha-two titanium aluminides as matrices for continuous SiC-reinforced composites P. R. SmithJ. A. GravesCG. Rhodes OriginalPaper Pages: 1267 - 1283
Embrittlement of B2 iron aluminide by water vapor and by hydrogen D. B. KasulL. A. Heldt OriginalPaper Pages: 1285 - 1290
A structural study of oxidation in a zirconia-toughened alumina fiber-reinforced NiAl composite S. NourbakhshO. SahinH. Margolin OriginalPaper Pages: 1291 - 1299
The velocity of solidification of highly undercooled nickel B. Timothy BasslerWilliam H. HofmeisterRobert J. Bayuzick OriginalPaper Pages: 1301 - 1308
Numerical modeling of solidification and subsequent transformation of Fe-Cr-Ni alloys T. KosekiT. MatsumiyaT. Ogawa OriginalPaper Pages: 1309 - 1321
Cubic alni compound dispersed mg-based amorphous matrix composites prepared by rapid solidification A. NiikuraA. P. TsaiT. Masumoto Communications Pages: 1323 - 1325
Influence of near-surface microstructures on the transient current response in Fe-Cr-Ni alloys during scratch tests S. K. VarmaMonica M. de LugoA. Bronson Communications Pages: 1325 - 1331