1. Characterization of the high-temperature phase fields near stoichiometric γ-TiAl

   • S. C. Huang
   • P. A. Siemers

   Alloy Phases Pages: 1899 - 1906

2. Characterization of Ti carbosulfide precipitation in Ti microalloyed steels

   • W. J. Liu
   • S. Yue
   • J. J. Jonas

   Alloy Phases Pages: 1907 - 1915

3. Graphite formation in high-purity cold-rolled carbon steels

   • Atsuki Okamoto

   Alloy Phases Pages: 1917 - 1925

4. The microstructure of selected annealed vanadium-base alloys

   • T. Schober
   • D. N. Braski

   Alloy Phases Pages: 1927 - 1932

5. Microstructural modeling of recrystallization in deformed iron single crystals

   • R. A. Vandermeer
   • B. B. Rath

   Transformations Pages: 1933 - 1942

6. Application of modeling of the texture dependence of environmentally assisted crack growth of long and short cracks to ZIRCALOY fuel tubing

   • John P. Foster
   • R. J. Comstock

   Transfort Phenomena Pages: 1943 - 1950

7. Parameters affecting sag resistance in spring steels

   • M. Assefpour-Dezfuly
   • A. Brownrigg

   Mechanical Behavior Pages: 1951 - 1959

8. Fracture and fatigue crack propagation properties of hardened 52100 steel

   • J. M. Beswick

   Mechanical Behavior Pages: 1961 - 1973

9. Calculation of the forming limit diagram

   • Wonjib Choi
   • Peter P. Gillis
   • S. E. Jones

   Mechanical Behavior Pages: 1975 - 1987

10. Mode I stress intensity factors induced by fracture surface roughness under pure mode III loading: Application to the effect of loading modes on stress corrosion crack growth

    • T. S. Gross
    • D. A. Mendelsohn

    Mechanical Behavior Pages: 1989 - 1999

11. The rate dependence and microstructure of high-purity silver deformed to large strains between 0.16 and 0.30T _m

    • M. E. Kassner

    Mechanical Behavior Pages: 2001 - 2010

12. Stress relaxation of an AISI 1080 steel

    • Ricardo E. Medrano
    • Peter P. Gillis

    Mechanical Behavior Pages: 2011 - 2015

13. Grain-boundary contamination and ductility loss in boron-doped Ni₃Al

    • M. Takeyama
    • C. T. Liu

    Mechanical Behavior Pages: 2017 - 2023

14. Improved ductility of Ni₃Si by microalloying with boron or carbon

    • A. I. Taub
    • C. L. Briant

    Mechanical Behavior Pages: 2025 - 2032

15. Dislocation structures of monocrystalline copper in cyclic latent hardening

    • Zhirui Wang
    • Campbell Laird

    Mechanical Behavior Pages: 2033 - 2045

16. Thermodynamic consistency of the ternary functions

    • J. P. Hajra

    Physical Chemical Pages: 2047 - 2055

17. The effects of heat treatment on the chromium depletion, precipitate evolution, and corrosion resistance of INCONEL alloy 690

    • J. J. Kai
    • G. P. Yu
    • S. C. Yao

    Environment Pages: 2057 - 2067

18. Fatigue crack growth behavior of pressure vessel steels and submerged arc weldments in a high-temperature pressurized water environment

    • P. K. Liaw
    • W. A. Logsdon
    • J. A. Begley

    Environment Pages: 2069 - 2085

19. Retrogression and reaging and the role of dislocations in the stress corrosion of 7000-type aluminum alloys

    • M. Talianker
    • B. Cina

    Environment Pages: 2087 - 2092

20. Weld thermal cycles and precipitation effects in Ti-V-containing HSLA steels

    • G. R. Wang
    • T. W. Lau
    • T. H. North

    Welding and Joining Pages: 2093 - 2100

21. Improving tantalum's oxidation resistance by Al⁺ ion implantation

    • M. Saqib
    • J. M. Hampikian
    • D. I. Potter

    Surface Treatment Pages: 2101 - 2108

22. The evolution of microstructure in the undercooled Zn-Sn entrained droplets

    • K. Chattopadhyay
    • P. R. Swarnamba
    • J. P. N. Srivastava

    Solidification Pages: 2109 - 2115

23. Microstructural development during solidification of stainless steel alloys

    • J. W. Elmer
    • S. M. Allen
    • T. W. Eagar

    Solidification Pages: 2117 - 2131

24. Solidification of high-speed tool steels

    • H. F. Fischmeister
    • R. Riedl
    • S. Karagöz

    Solidification Pages: 2133 - 2148

25. INCONEL 718: A solidification diagram

    • G. A. Knorovsky
    • M. J. Cieslak
    • W. F. Hammetter

    Solidification Pages: 2149 - 2158

26. Microstructural observations of pressure cast Ni₃Al/Al₂O₃ and Ni/Al₂O₃ composites

    • S. Nourbakhsh
    • H. Margolin
    • F. L. Liang

    Solidification Pages: 2159 - 2166

27. A note on the Ag−Au−Ge equilibrium phase diagram

    • G. Borzone
    • S. Hassam
    • J. P. Bros

    Alloy Phases Pages: 2167 - 2170

28. The effect of chromium on antimony and nickel grain boundary segregation in iron

    • C. L. Briant

    Alloy Phases Pages: 2170 - 2171

29. An elastically induced morphological instability of a misfitting precipitate

    • M. J. Kaufman
    • P. W. Voorhees
    • F. S. Biancaniello

    Transformations Pages: 2171 - 2175

30. Involvement of processing defects in failure of FP/Al−Li

    • W. J. Drury

    Mechanical Behavior Pages: 2175 - 2179

31. Determination of friction coefficient for sheet materials under stretch-forming conditions

    • R. T. Fox
    • A. M. Maniatty
    • D. Lee

    Mechanical Behavior Pages: 2179 - 2182

32. Large-strain deformation of aluminum single crystals at elevated temperature as a test of the geometric-dynamic-recrystallization concept

    • M. E. Kassner

    Mechanical Behavior Pages: 2182 - 2185

33. The solubility of titanium diboride in aluminum

    • Ernest W. Dewing

    Physical Chemical Pages: 2185 - 2187

34. Behavior of sensitized AlSl types 321 and 347 austenitic stainless steels in hydrogen

    • P. Rozenak
    • D. Eliezer

    Environment Pages: 2187 - 2190

35. Faceted-nonfaceted dendritic transitions during the laser processing of Al₂O₃-1.0 Wt Pct MgO

    • J. A. Sekhar
    • A. Bharti
    • R. Trivedi

    Solidification Pages: 2191 - 2194

36. Errata: Effects of Mn, Si, and purity on the design of 3.5NiCrMoV, 1CrMoV, and 2.25Cr-1Mo bainitic alloy steels

    • R. L. Bodnar
    • T. Ohhashi
    • R. I. Jaffee

    Erratum Pages: 2196 - 2212