1. Orientation-Dependent Tensile Behavior of Nanolaminated Graphene-Al Composites: An In Situ Study

   • Xidan Fu
   • Zan Li
   • Di Zhang

   Communication 21 August 2018 Pages: 5229 - 5234

   

2. Impulse Excitation Internal Friction Study of Retained Austenite in Ferrous Martensite

   • Ji Hoon Kim
   • Yu Na Ju
   • Bruno C. De Cooman

   Communication 28 August 2018 Pages: 5235 - 5240

   

3. Martensite Formation from Reverted Austenite at Sub-zero Celsius Temperature

   • F. Niessen
   • M. Villa
   • M. A. J. Somers

   Communication 27 August 2018 Pages: 5241 - 5245

   

4. Importance of Non-uniform Boundary Migration for Recrystallization Kinetics

   • Fengxiang Lin
   • Yubin Zhang
   • Dorte Juul Jensen

   OriginalPaper 03 August 2018 Pages: 5246 - 5258

   

5. Characterization of the Martensitic Transformation in NiPtAl Alloy Using Digital Holographic Imaging

   • Benjamin P. Thiesing
   • Sebastien Dryepondt
   • Christopher J. Mann

   OriginalPaper 13 August 2018 Pages: 5259 - 5270

   

6. The Influence of Rare Earth Elements on Phase Transformation in 25Mn Steel During Continuous Heating

   • Honghong Yan
   • Yong Hu
   • Dawen Zhao

   OriginalPaper 30 August 2018 Pages: 5271 - 5276

   

7. Carbon Clustering in Low-Temperature Bainite

   • Rosalia Rementeria
   • Carlos Capdevila
   • Francisca G. Caballero

   OriginalPaper 03 September 2018 Pages: 5277 - 5287

   

8. The Friction Stress of the Hall–Petch Relationship of Pure Mg and Solid Solutions of Al, Zn, and Gd

   • D. Nagarajan
   • C. H. Cáceres

   OriginalPaper 06 September 2018 Pages: 5288 - 5297

   

9. Improvement of Creep Resistance at 950 °C and 400 MPa in Ru-Containing Single-Crystal Superalloys with a High Level of Co Addition

   • J. J. Huo
   • Q. Y. Shi
   • Q. Feng

   OriginalPaper 06 August 2018 Pages: 5298 - 5308

   

10. Microstructural Degradation and the Effects on Creep Properties of a Hot Corrosion-Resistant Single-Crystal Ni-Based Superalloy During Long-Term Thermal Exposure

    • X. W. Jiang
    • D. Wang
    • L. H. Lou

    OriginalPaper 03 August 2018 Pages: 5309 - 5322

    

11. Microstructural and Finite Element Analysis of Creep Failure in Dissimilar Weldment Between 9Cr and 2.25Cr Heat-Resistant Steels

    • Hyun Je Sung
    • Ji Hyun Moon
    • Sung-Joon Kim

    OriginalPaper 09 August 2018 Pages: 5323 - 5332

    

12. Strength and Ductility with Dual Grain-Size and Texture Gradients in AZ31 Mg Alloy

    • Jiawei Yan
    • Jiawei Ma
    • Yao Shen

    OriginalPaper 22 August 2018 Pages: 5333 - 5338

    

13. Mechanical and Microstructural Characterization of AF955 (UNS N09955) Nickel-Based Superalloy After Different Heat Treatments

    • Andrea Serafini
    • Giuliano Angella
    • Maria Francesca Brunella

    OriginalPaper 28 August 2018 Pages: 5339 - 5352

    

14. MicroROM: A Physics-Based Constitutive Model for Ni-Based Superalloys

    • K. S. Chan

    OriginalPaper 20 August 2018 Pages: 5353 - 5367

    

15. The Role of Hydrogen on the Local Fracture Toughness Properties of 7XXX Aluminum Alloys

    • Md. Shahnewaz Bhuiyan
    • Hiroyuki Toda
    • Yoshio Watanabe

    OriginalPaper 25 August 2018 Pages: 5368 - 5381

    

16. Understanding the High Strength and Good Ductility in LPSO-Containing Mg Alloy Using Synchrotron X-ray Diffraction

    • Jie Wang
    • Leyun Wang
    • Haiyan Jiang

    OriginalPaper 25 August 2018 Pages: 5382 - 5392

    

17. Effect of Ball Burnishing Treatment on the Fatigue Behavior of 316L Stainless Steel Operating Under Anodic and Cathodic Polarization Potentials

    • Hasan Yilmaz
    • Recep Sadeler

    OriginalPaper 30 August 2018 Pages: 5393 - 5401

    

18. Investigation of Microstructure and Mechanical Properties of Fe-V Dissimilar Welds

    • Qiaoling Chu
    • Min Zhang
    • Cheng Yan

    OriginalPaper 01 August 2018 Pages: 5402 - 5410

    

19. Effect of Au Addition on the Microstructure and Properties of Ag-4Pd Bonding Wires

    • Bing-Hau Kuo
    • Du-Cheng Tsai
    • Fuh-Sheng Shieu

    OriginalPaper 26 July 2018 Pages: 5411 - 5422

    

20. Shear Strength of Reactive Resistance Welded Ti6Al4V Parts with the Use of Ni(V)/Al Multilayers

    • Łukasz Maj
    • Jerzy Morgiel
    • Elżbieta Godlewska

    OriginalPaper Open access 27 July 2018 Pages: 5423 - 5427

    

21. A Comparison of the Inertia Friction Welding Behavior of Similar and Dissimilar Ni-Based Superalloys

    • O. N. Senkov
    • D. W. Mahaffey
    • S. L. Semiatin

    OriginalPaper 30 July 2018 Pages: 5428 - 5444

    

22. Effect of Nb Addition on Dendrite Growth and Equiaxed Grain Ratio of Fe-20 Pct Cr High-Purity Ferritic Stainless Steel

    • Yuyang Hou
    • Shijian Li
    • Guoguang Cheng

    OriginalPaper 27 July 2018 Pages: 5445 - 5457

    

23. Experiments and LBM Simulations of Grain Refining in Al-Zn Alloys by Solid–Liquid Mixing

    • Shu-Guo Zhang
    • Hong-Min Guo
    • Xiang-Jie Yang

    OriginalPaper 30 July 2018 Pages: 5458 - 5468

    

24. Influence of Casting Parameters on Hooks and Entrapped Inclusions at the Subsurface of Continuous Casting Slabs

    • Xubin Zhang
    • Ying Ren
    • Lifeng Zhang

    OriginalPaper 03 August 2018 Pages: 5469 - 5477

    

25. Containerless Solidification Processing and Phase-Field Simulation for Ternary Fe-Cu-Co Peritectic Alloy Under Reduced-Gravity Conditions

    • F. P. Dai
    • Y. H. Wu
    • B. Wei

    OriginalPaper 30 August 2018 Pages: 5478 - 5487

    

26. Density Measurement and Atomic Structure Simulation of Metastable Liquid Ti-Ni Alloys

    • P. F. Zou
    • H. P. Wang
    • B. Wei

    OriginalPaper 13 August 2018 Pages: 5488 - 5496

    

27. Microstructural Characterization and Mechanical Properties of TIG-Welded API 5L X60 HSLA Steel and AISI 310S Stainless Steel Dissimilar Joints

    • A. H. Saedi
    • E. Hajjari
    • S. Mohsen Sadrossadat

    OriginalPaper 30 August 2018 Pages: 5497 - 5508

    

28. Solidification Microsegregation and Hot Ductility of Fe-Mn-C-Al-xNb TWIP Steels

    • Min Hyeok Kwon
    • Jin-Kyung Kim
    • Bruno C. De Cooman

    OriginalPaper 30 August 2018 Pages: 5509 - 5523

    

29. Study of the Heat Transfer Behavior and Naturally Deposited Films in Strip Casting by Using Droplet Solidification Technique

    • Wanlin Wang
    • Chenyang Zhu
    • Lejun Zhou

    OriginalPaper 30 July 2018 Pages: 5524 - 5534

    

30. Nanopowder Effect on Fe Nano/Micro-Bimodal Powder Injection Molding

    • Joo Won Oh
    • Won Sik Lee
    • Seong Jin Park

    OriginalPaper 06 August 2018 Pages: 5535 - 5545

    

31. Selective Oxidation of a C-2Mn-1.3Si (Wt Pct) Advanced High-Strength Steel During Continuous Galvanizing Heat Treatments

    • G. Seyed Mousavi
    • J. R. McDermid

    OriginalPaper 03 August 2018 Pages: 5546 - 5560

    

32. Effect of Process Atmosphere Dew Point and Tin Addition on Oxide Morphology and Growth for a Medium-Mn Third Generation Advanced Steel During Intercritical Annealing

    • Maedeh Pourmajidian
    • Brian Langelier
    • Joseph R. McDermid

    OriginalPaper 03 August 2018 Pages: 5561 - 5573

    

33. A Novel Composition Design Method for Beta-Gamma TiAl Alloys with Excellent Hot Workability

    • Fantao Kong
    • Ning Cui
    • Xiaopeng Wang

    OriginalPaper 22 August 2018 Pages: 5574 - 5584

    

34. On the Supplementation of Magnesium and Usage of Ultrasound Stirring for Fabricating In Situ TiB₂/A356 Composites with Improved Mechanical Properties

    • Zhiwei Liu
    • Zhiwu Dong
    • Qingyou Han

    OriginalPaper 27 August 2018 Pages: 5585 - 5598

    

35. Effective Activation Energy for the Solid-State Sintering of Silicon Carbide Ceramics

    • Dulal Chandra Jana
    • G. Sundararajan
    • K. Chattopadhyay

    OriginalPaper 30 August 2018 Pages: 5599 - 5606

    

36. Synthesis and Air Jet Erosion Study of Al_XFe_1.5CrMnNi_0.5 (x = 0.3, 0.5) High-Entropy Alloys

    • Saurav Kumar
    • Devesh Kumar
    • Amar Patniak

    OriginalPaper 05 September 2018 Pages: 5607 - 5618

    

37. Thermal Stress Analysis of Residual Stress in a Cylindrical Aluminum Casting with Cast-in GCI Liner, Taking Recovery Behavior Effect into Account

    • Yuichi Motoyama
    • Naoyuki Ebihara
    • Makoto Yoshida

    OriginalPaper 04 September 2018 Pages: 5619 - 5635

    

38. Effect of Aluminum on Borocarbides and Temper Softening Resistance of High-Boron High-Speed Steel

    • Xiangyi Ren
    • Hanguang Fu
    • Shuli Tang

    OriginalPaper 02 August 2018 Pages: 5636 - 5645

    

39. Investigation of the Structure and Properties of the Fe-Ni-Co-Cu-V Multiprincipal Element Alloys

    • A. I. Bazlov
    • A. Yu. Churyumov
    • D. V. Louzguine-Luzgin

    OriginalPaper 23 August 2018 Pages: 5646 - 5652

    

40. Effects of Alloying Elements on Thermal Expansion Behavior of Ni-Fe-Cr-Based Superalloys

    • Yunsheng Wu
    • Xuezhi Qin
    • Lanzhang Zhou

    OriginalPaper 30 August 2018 Pages: 5653 - 5660

    

41. Effect of the Mass Fraction of Ceramic Particles on the Porosity of Wear-Resistant Composites Fabricated by Combustion Synthesis

    • Guilin Sun
    • Dingdong Fan
    • Sufen Tao

    OriginalPaper 26 July 2018 Pages: 5661 - 5670

    

42. Microstructure and Mechanical Properties of In Situ TiB/TiC Particle-Reinforced Ti-5Al-5Mo-5V-3Cr Composites Synthesized by Spark Plasma Sintering

    • Steffen Grützner
    • Lutz Krüger
    • Ines Schneider

    OriginalPaper 03 August 2018 Pages: 5671 - 5682

    

43. Nanoparticles Reinforcement for the Improved Strength and High-Temperature Wear Resistance of Mn-Cr Steel

    • A. Kračun
    • D. Jenko
    • B. Podgornik

    OriginalPaper 18 July 2018 Pages: 5683 - 5694

    

44. Surface Properties and Erosion–Corrosion Behavior of Nanostructured Pure Titanium in Simulated Body Fluid

    • Osama M. Irfan
    • Fahad A. Al-Mufadi
    • F. Djavanroodi

    OriginalPaper 23 July 2018 Pages: 5695 - 5704

    

45. Phase-Field Modeling of Equilibrium Precipitate Shapes Under the Influence of Coherency Stresses

    • Bhalchandra Bhadak
    • R. Sankarasubramanian
    • Abhik Choudhury

    OriginalPaper 02 August 2018 Pages: 5705 - 5726

    

46. Microstructure and Property-Based Statistically Equivalent Representative Volume Elements for Polycrystalline Ni-Based Superalloys Containing Annealing Twins

    • Akbar Bagri
    • George Weber
    • Somnath Ghosh

    OriginalPaper 07 August 2018 Pages: 5727 - 5744

    

47. Optimization of Crystallographic Texture for Sheet-forming Applications Using Taylor-based Models

    • Jesús Galán-López
    • Leo A. I. Kestens

    OriginalPaper Open access 21 August 2018 Pages: 5745 - 5762

    

48. Effect of Stress Relieving Heat Treatment on the Microstructure and High-Temperature Compressive Deformation Behavior of Ti-6Al-4V Alloy Manufactured by Selective Laser Melting

    • Young-Kyun Kim
    • Soon-Hong Park
    • Kee-Ahn Lee

    OriginalPaper 10 August 2018 Pages: 5763 - 5774

    

49. Process-Defect-Structure-Property Correlations During Laser Powder Bed Fusion of Alloy 718: Role of In Situ and Ex Situ Characterizations

    • S. J. Foster
    • K. Carver
    • S. S. Babu

    OriginalPaper 14 August 2018 Pages: 5775 - 5798

    

50. Effect of Metastable Mg₂Si and Dislocations on α-Al(MnFe)Si Dispersoid Formation in Al-Mn-Mg 3xxx Alloys

    • Zhen Li
    • Zhan Zhang
    • X.-Grant Chen

    OriginalPaper 02 August 2018 Pages: 5799 - 5814