1. Bauschinger Effect and Back Stress in Gradient Cu-Ge Alloy

   • Xianzhi Hu
   • Shenbao Jin
   • Xinkun Zhu

   Topical Collection: Carl Koch Symposium: Mechanical Behavior of Nanomaterials 22 June 2017 Pages: 3943 - 3950

   

2. The Evolution of Strain Gradient and Anisotropy in Gradient-Structured Metal

   • Xiangde Bian
   • Fuping Yuan
   • Yuntian Zhu

   Topical Collection: Carl Koch Symposium: Mechanical Behavior of Nanomaterials 10 July 2017 Pages: 3951 - 3960

   

3. Mechanical Properties of Gradient Structure Mg Alloy

   • Hongliang Chen
   • Jiang Yang
   • KunYu Zhao

   Topical Collection: Carl Koch Symposium: Mechanical Behavior of Nanomaterials 12 July 2017 Pages: 3961 - 3970

   

4. Large-Strain Softening of Aluminum in Shear at Elevated Temperature: Influence of Dislocation Climb

   • M. E. Kassner
   • C. S. Campbell
   • R. Ermagan

   Communication 21 June 2017 Pages: 3971 - 3974

   

5. A Novel Heat Treatment Process for Surface Hardening of Steel: Metal Melt Surface Hardening

   • Yong-sheng Fu
   • Wei Zhang
   • Jianguo Li

   Communication 21 June 2017 Pages: 3975 - 3979

   

6. Influence of Grain Coarsening on the Creep Parameters During the Superplastic Deformation of a Severely Friction Stir Processed Al-Zn-Mg-Cu Alloy

   • Alberto Orozco-Caballero
   • Oscar A. Ruano
   • Fernando Carreño

   Communication 07 July 2017 Pages: 3980 - 3984

   

7. The Influence of Vanadium on Ferrite and Bainite Formation in a Medium Carbon Steel

   • T. Sourmail
   • C. Garcia-Mateo
   • D. Milbourn

   OriginalPaper 05 July 2017 Pages: 3985 - 3996

   

8. C-Curves for Lengthening of Widmanstätten and Bainitic Ferrite

   • Jiaqing Yin
   • Lindsay Leach
   • Annika Borgenstam

   OriginalPaper Open access 10 July 2017 Pages: 3997 - 4005

   

9. Morphology of Upper and Lower Bainite with 0.7 Mass Pct C

   • Jiaqing Yin
   • Mats Hillert
   • Annika Borgenstam

   OriginalPaper Open access 06 July 2017 Pages: 4006 - 4024

   

10. Hydrogen Environment Assisted Cracking of Modern Ultra-High Strength Martensitic Steels

    • Greger L. Pioszak
    • Richard P. Gangloff

    OriginalPaper 06 July 2017 Pages: 4025 - 4045

    

11. Study on the Hydrogen Embrittlement of Aermet100 Using Hydrogen Permeation and SSRT Techniques

    • Yabo Hu
    • Chaofang Dong
    • Xiaogang Li

    OriginalPaper 05 June 2017 Pages: 4046 - 4057

    

12. Mechanism-Based Modeling for Low Cycle Fatigue of Cast Austenitic Steel

    • Xijia Wu
    • Guangchun Quan
    • Clayton Sloss

    OriginalPaper 07 June 2017 Pages: 4058 - 4071

    

13. Precipitation Effect on Mechanical Properties and Phase Stability of High Manganese Steel

    • Cheoljun Bae
    • Rosa Kim
    • Jongryoul Kim

    OriginalPaper 20 June 2017 Pages: 4072 - 4079

    

14. Work Hardening, Dislocation Structure, and Load Partitioning in Lath Martensite Determined by In Situ Neutron Diffraction Line Profile Analysis

    • Stefanus Harjo
    • Takuro Kawasaki
    • Tamas Ungár

    OriginalPaper 21 June 2017 Pages: 4080 - 4092

    

15. The Effect of Low Concentrations Nb and C on the Structure and High-Temperature Strength of Fe₃Al Aluminide

    • Petr Kratochvíl
    • Martin Švec
    • Věra Vodičková

    OriginalPaper 20 June 2017 Pages: 4093 - 4096

    

16. The Yttrium Effect on Nanoscale Structure, Mechanical Properties, and High-Temperature Oxidation Resistance of (Ti_0.6Al_0.4)_1–x Y _x N Multilayer Coatings

    • Jingxian Wang
    • Mohammad Arab Pour Yazdi
    • ZhiLi Dong

    OriginalPaper 12 July 2017 Pages: 4097 - 4110

    

17. Deep Drawing Behavior of CoCrFeMnNi High-Entropy Alloys

    • Jae Wung Bae
    • Jongun Moon
    • Hyoung Seop Kim

    OriginalPaper 05 July 2017 Pages: 4111 - 4120

    

18. Effect of Pre-strain on the Solute Clustering, Mechanical Properties, and Work-Hardening of a Naturally Aged Al-Cu-Mg Alloy

    • D. Shao
    • P. Zhang
    • J. Sun

    OriginalPaper 07 July 2017 Pages: 4121 - 4134

    

19. Strengthening of Fe₃Al Aluminides by One or Two Solute Elements

    • Petr Kratochvíl
    • Stanislav Daniš
    • Robert Král

    OriginalPaper 06 July 2017 Pages: 4135 - 4139

    

20. Microstructure, Composition, and Impact Toughness Across the Fusion Line of High-Strength Bainitic Steel Weldments

    • Liangyun Lan
    • Xiangwei Kong
    • Dewen Zhao

    OriginalPaper 15 June 2017 Pages: 4140 - 4153

    

21. Microstructural and Phase Composition Differences Across the Interfaces in Al/Ti/Al Explosively Welded Clads

    • Dagmara Malgorzata Fronczek
    • Robert Chulist
    • Joanna Wojewoda-Budka

    OriginalPaper Open access 28 June 2017 Pages: 4154 - 4165

    

22. Study of MA Effect on Yield Strength and Ductility of X80 Linepipe Steels Weld

    • Nazmul Huda
    • Robert Lazor
    • Adrian P. Gerlich

    OriginalPaper 20 June 2017 Pages: 4166 - 4179

    

23. Fabrication and Characterization of Ni-SiC Nanocomposite Coatings on Al Substrates by Ball Impact Deposition Method

    • Arash Yazdani
    • Alireza Zakeri

    OriginalPaper 21 June 2017 Pages: 4180 - 4192

    

24. Columnar-to-Equiaxed Transition and Equiaxed Grain Alignment in Directionally Solidified Ni₃Al Alloy Under an Axial Magnetic Field

    • Huan Liu
    • Weidong Xuan
    • Zhongming Ren

    OriginalPaper 28 June 2017 Pages: 4193 - 4203

    

25. Grain Refinement by Cyclic Displacive Forward/Reverse Transformation in Fe-High-Ni Alloys

    • Tadachika Chiba
    • Hassan Shirazi
    • Tadashi Furuhara

    OriginalPaper 30 May 2017 Pages: 4204 - 4210

    

26. Microstructural Analyses of ATI 718Plus^® Produced by Wire-ARC Additive Manufacturing Process

    • G. Asala
    • A. K. Khan
    • O. A. Ojo

    OriginalPaper 13 June 2017 Pages: 4211 - 4228

    

27. Peritectic Solidification Path of the La(Fe,Si)₁₃ Phase in Dual-Phase Directionally Solidified La-Fe-Si Magnetocaloric Alloys

    • Liang Yang
    • Zhenni Zhou
    • Jianguo Li

    OriginalPaper 26 June 2017 Pages: 4229 - 4236

    

28. SEM/EBSD Analysis on Globularization Behavior of Lamellar Microstructure in Ti-6Al-4V During Hot Deformation and Annealing

    • Yoshinori Ito
    • Shogo Murakami
    • Nobuhiro Tsuji

    OriginalPaper 28 June 2017 Pages: 4237 - 4246

    

29. Microstructure and Texture Evolution during Single- and Multiple-Pass Friction Stir Processing of Heat-Treatable Aluminum Alloy 2024

    • Naresh Nadammal
    • Satish V. Kailas
    • Satyam Suwas

    OriginalPaper 27 June 2017 Pages: 4247 - 4261

    

30. Effect of Li Addition on the Optimum Thermo-Mechanical Processing Parameters of the Mg Alloy AZ31

    • Govind Bajargan
    • Gaurav Singh
    • U. Ramamurty

    OriginalPaper 22 June 2017 Pages: 4262 - 4274

    

31. An Enhanced Steady-State Constitutive Model for Semi-solid Forming of Al7075 Based on Cross Model

    • Ramin Meshkabadi
    • Vahid Pouyafar
    • Ghader Faraji

    OriginalPaper 05 July 2017 Pages: 4275 - 4285

    

32. Mapping of Diffusion and Nanohardness Properties of Fcc Co-Al-V Alloys Using Ternary Diffusion Couples

    • Chuanyun Wang
    • Guanglong Xu
    • Yuwen Cui

    OriginalPaper 05 July 2017 Pages: 4286 - 4296

    

33. Deformation and Recrystallization Behavior of the Cast Structure in Large Size, High Strength Steel Ingots: Experimentation and Modeling

    • K. Chadha
    • D. Shahriari
    • M. Jahazi

    OriginalPaper 05 July 2017 Pages: 4297 - 4313

    

34. Cellular Automaton Study of Hydrogen Porosity Evolution Coupled with Dendrite Growth During Solidification in the Molten Pool of Al-Cu Alloys

    • Cheng Gu
    • Yanhong Wei
    • Lvbo She

    OriginalPaper 28 June 2017 Pages: 4314 - 4323

    

35. Modeling and Analysis of High-Energy Ball Milling Through Attritors

    • Xuzhe Zhao
    • Leon Shaw

    OriginalPaper 05 July 2017 Pages: 4324 - 4333

    

36. Phase Equilibria in the Fe-Mo-Ti Ternary System at 1173 K (900 °C) and 1023 K (750 °C)

    • A. J. Knowles
    • N. G. Jones
    • H. J. Stone

    OriginalPaper Open access 05 July 2017 Pages: 4334 - 4341

    

37. Thermodynamic Assessments of the Fe-Si-Cr and Fe-Si-Mg Systems

    • Senlin Cui
    • In-Ho Jung

    OriginalPaper 21 June 2017 Pages: 4342 - 4355

    

38. Failure Mechanism of a Stellite Coating on Heat-Resistant Steel

    • Dong Wang
    • Haixing Zhao
    • Guo He

    OriginalPaper 05 July 2017 Pages: 4356 - 4364

    

39. Formation of Fine B2/β + O Structure and Enhancement of Hardness in the Aged Ti₂AlNb-Based Alloys Prepared by Spark Plasma Sintering

    • Mengchen Li
    • Qi Cai
    • Huijun Li

    OriginalPaper 05 July 2017 Pages: 4365 - 4371

    

40. Effects of AlN Nanoparticles on the Microstructure, Solderability, and Mechanical Properties of Sn-Ag-Cu Solder

    • Do-Hyun Jung
    • Ashutosh Sharma
    • Jae-Pil Jung

    OriginalPaper 26 June 2017 Pages: 4372 - 4384

    

41. Reinforcement Size Dependence of Load Bearing Capacity in Ultrafine-Grained Metal Matrix Composites

    • Hanry Yang
    • Lin Jiang
    • Julie M. Schoenung

    OriginalPaper 05 July 2017 Pages: 4385 - 4392

    

42. Thermally Induced Microstructural Transformations of Fe₇₂Si₁₅B₈V₄Cu₁ Alloy

    • Milica M. Vasić
    • Radoslav Surla
    • Dragica M. Minić

    OriginalPaper 26 June 2017 Pages: 4393 - 4402

    

43. Effect of Intercritical Quenching on the Microstructure and Cryogenic Mechanical Properties of a 7 Pct Ni Steel

    • Hongwei Cao
    • Xinghong Luo
    • Shi Liu

    OriginalPaper 06 July 2017 Pages: 4403 - 4410

    

44. Impact of Interlayer Dwell Time on Microstructure and Mechanical Properties of Nickel and Titanium Alloys

    • B. K. Foster
    • A. M. Beese
    • T. A. Palmer

    OriginalPaper 12 June 2017 Pages: 4411 - 4422

    

45. Erratum to: Grain Refinement by Cyclic Displacive Forward/Reverse Transformation in Fe-High-Ni Alloys

    • Tadachika Chiba
    • Hassan Shirazi
    • Tadashi Furuhara

    Erratum 21 June 2017 Pages: 4423 - 4423