1. Effect of Treatment Area on Residual Stress and Fatigue in Laser Peened Aluminum Sheets

   • M. Burak Toparli
   • Niall Smyth
   • Michael E. Fitzpatrick

   Communication 18 January 2017 Pages: 1519 - 1523

   

2. Innovative Technology for Preparation of Seamless Nitinol Tubes Using SHS Without Forming

   • Pavel Salvetr
   • Zuzana Pecenová
   • Pavel Novák

   Communication 25 January 2017 Pages: 1524 - 1527

   

3. Unusual Solidification Behavior of the Suction-Cast Cu-Zr-Al-Y Alloy Doped with Fe

   • Tomasz Kozieł
   • Grzegorz Cios
   • Piotr Bała

   Communication 31 January 2017 Pages: 1528 - 1533

   

4. Morphology-Dependent Hardness of Cr₇C₃-Ni-Rich Alloy Composite vs Orientation Independent Hardness of Cr₇C₃ Primary Phase in a Laser Clad Microstructure

   • Lakshmi Narayanan Venkatesh
   • Pitchuka Suresh Babu
   • Indradev Samajdar

   Communication 10 February 2017 Pages: 1534 - 1539

   

5. Identification of Mo-based Precipitates in Haynes 282 Superalloy

   • L. O. Osoba
   • A. K. Khan
   • O. A. Ojo

   Communication 07 February 2017 Pages: 1540 - 1543

   

6. Foreword

   Symposium: Bulk Metallic Glasses XII 15 February 2017 Pages: 1544 - 1544

7. Fracture Morphology and Local Deformation Characteristics in the Metallic Glass Matrix Composite Under Tension

   • Y. S. Wang
   • X. H. Sun
   • J. W. Qiao

   Symposium: Bulk Metallic Glasses XII 25 November 2015 Pages: 1545 - 1550

   

8. Morphological Stability of δ-Ferrite/γ Interphase Boundary in Carbon Steel

   • Guowei Chang
   • Shuying Chen
   • Qingchun Li

   OriginalPaper 23 January 2017 Pages: 1551 - 1561

   

9. High-Temperature Phase Equilibria of Duplex Stainless Steels Assessed with a Novel In-Situ Neutron Scattering Approach

   • Niklas Pettersson
   • Sten Wessman
   • Andrew Studer

   OriginalPaper 20 January 2017 Pages: 1562 - 1571

   

10. In Situ Observation of Austenite Growth During Continuous Heating in Very-Low-Carbon Fe-Mn and Ni Alloys

    • M. Enomoto
    • X. L. Wan

    OriginalPaper 06 February 2017 Pages: 1572 - 1580

    

11. Effect of Cooling Rate and Chemical Composition on Microstructure and Properties of Naturally Cooled Vanadium-Microalloyed Steels

    • Anish Karmakar
    • Pooja Sahu
    • Saurabh Kundu

    OriginalPaper 18 January 2017 Pages: 1581 - 1595

    

12. Oxidation of Alloy 600 and Alloy 690: Experimentally Accelerated Study in Hydrogenated Supercritical Water

    • Tyler Moss
    • Guoping Cao
    • Gary S. Was

    OriginalPaper 01 February 2017 Pages: 1596 - 1612

    

13. Accelerated Stress Corrosion Crack Initiation of Alloys 600 and 690 in Hydrogenated Supercritical Water

    • Tyler Moss
    • Gary S. Was

    OriginalPaper 30 January 2017 Pages: 1613 - 1628

    

14. Crack Growth Modeling and Life Prediction of Pipeline Steels Exposed to Near-Neutral pH Environments: Dissolution Crack Growth and Occurrence of Crack Dormancy in Stage I

    • Jiaxi Zhao
    • Weixing Chen
    • Sean Keane

    OriginalPaper 20 January 2017 Pages: 1629 - 1640

    

15. Crack Growth Modeling and Life Prediction of Pipeline Steels Exposed to Near-Neutral pH Environments: Stage II Crack Growth and Overall Life Prediction

    • Jiaxi Zhao
    • Weixing Chen
    • Sean Keane

    OriginalPaper 12 January 2017 Pages: 1641 - 1652

    

16. 748 K (475 °C) Embrittlement of Duplex Stainless Steel: Effect on Microstructure and Fracture Behavior

    • Cem Örnek
    • M. G. Burke
    • D. L. Engelberg

    OriginalPaper Open access 17 January 2017 Pages: 1653 - 1665

    

17. Grain Boundary Engineering of a Low Stacking Fault Energy Ni-based Superalloy

    • Joshua McCarley
    • Randolph Helmink
    • Sammy Tin

    OriginalPaper 01 February 2017 Pages: 1666 - 1677

    

18. Tensile Properties of Medium Mn Steel with a Bimodal UFG α + γ and Coarse δ-Ferrite Microstructure

    • Seonjong Lee
    • Sunmi Shin
    • Bruno C. De Cooman

    OriginalPaper 07 February 2017 Pages: 1678 - 1700

    

19. A New Theoretical Approach Based on the Maxwell Model to Obtain Rheological Properties of Solidifying Alloys and Its Validation

    • Akira Matsushita
    • Ryosuke Takai
    • Makoto Yoshida

    OriginalPaper 07 February 2017 Pages: 1701 - 1707

    

20. Friction Stir Welding in Wrought and Cast Aluminum Alloys: Weld Quality Evaluation and Effects of Processing Parameters on Microstructure and Mechanical Properties

    • Yi Pan
    • Diana A. Lados

    OriginalPaper 20 January 2017 Pages: 1708 - 1726

    

21. Characterization of Discontinuous Coarsening Reaction Products in INCONEL^® Alloy 740H^® Fusion Welds

    • Daniel H. Bechetti
    • John N. Dupont
    • John J. de Barbadillo

    OriginalPaper 02 February 2017 Pages: 1727 - 1743

    

22. Effect of Dwell Time on Joint Interface Microstructure and Strength of Dissimilar Friction Stir Spot-Welded Al-5083 and St-12 Alloy Sheets

    • Eskandar Fereiduni
    • Mojtaba Movahedi
    • Hossein Najafi

    OriginalPaper 25 January 2017 Pages: 1744 - 1758

    

23. Effect of Beam Oscillation on Microstructure and Mechanical Properties of AISI 316L Electron Beam Welds

    • Jyotirmaya Kar
    • Sanat Kumar Roy
    • Gour Gopal Roy

    OriginalPaper 10 February 2017 Pages: 1759 - 1770

    

24. Microstructure and Mechanical Properties of 21-6-9 Stainless Steel Electron Beam Welds

    • John W. Elmer
    • G. Fred Ellsworth
    • Rupalee P. Mulay

    OriginalPaper 07 February 2017 Pages: 1771 - 1787

    

25. Effect of Initial Iron Content in a Zinc Bath on the Dissolution Rate of Iron During a Hot Dip Galvanizing Process

    • Sang Myung Lee
    • Suk Kyu Lee
    • Joo Hyun Park

    OriginalPaper 17 January 2017 Pages: 1788 - 1796

    

26. A Pore-Centric Model for Combined Shrinkage and Gas Porosity in Alloy Solidification

    • Vahid Khalajzadeh
    • Kent D. Carlson
    • Christoph Beckermann

    OriginalPaper 17 January 2017 Pages: 1797 - 1816

    

27. Solidification Behavior and Cooling Curves for Hypereutectic Fe-21 At. Pct B Alloy

    • Junfeng Xu
    • Zengyun Jian
    • Feng Liu

    OriginalPaper 13 January 2017 Pages: 1817 - 1826

    

28. Statistical Study to Evaluate the Effect of Processing Variables on Shrinkage Incidence During Solidification of Nodular Cast Irons

    • J. M. Gutiérrez
    • A. Natxiondo
    • J. Sertucha

    OriginalPaper 30 January 2017 Pages: 1827 - 1840

    

29. Dendritic Growth, Solidification Thermal Parameters, and Mg Content Affecting the Tensile Properties of Al-Mg-1.5 Wt Pct Fe Alloys

    • Leonardo F. Gomes
    • Bismarck L. Silva
    • José E. Spinelli

    OriginalPaper 08 February 2017 Pages: 1841 - 1855

    

30. A Study on Hot Tearing Behavior of Al-1 Wt Pct Cu Alloy Under Various Strain Rates During Casting Process

    • Majid Bagheri
    • Mostafa Alizadeh
    • Ali R. Ahmadi

    OriginalPaper 07 February 2017 Pages: 1856 - 1863

    

31. A Comparison of the Plastic-Flow Response of a Powder-Metallurgy Nickel-Base Superalloy Under Nominally-Isothermal and Transient-Heating Hot-Working Conditions

    • S. L. Semiatin
    • D. W. Mahaffey
    • O. N. Senkov

    OriginalPaper 06 January 2017 Pages: 1864 - 1879

    

32. Microstructural and Hardness Evaluations of a Centrifuged Sn-22Pb Casting Alloy Compared with a Lead-Free SnAg Alloy

    • Luz Myrian Satizabal
    • Diego Costa
    • Wislei Riuper Osório

    OriginalPaper 18 January 2017 Pages: 1880 - 1892

    

33. Bending Distortion Analysis of a Steel Shaft Manufacturing Chain from Cold Drawing to Grinding

    • Vinicius Waechter Dias
    • Alexandre da Silva Rocha
    • Hans Werner Zoch

    OriginalPaper 13 January 2017 Pages: 1893 - 1902

    

34. Effect of Recrystallization and Phase Transitions on the Mechanical Properties of Semihard Magnetic FeCo-7.15V Alloy During the Thermomechanical Process

    • Saeed Hasani
    • Morteza Shamanian
    • Jerzy A. Szpunar

    OriginalPaper 17 January 2017 Pages: 1903 - 1909

    

35. Production of a Powder Metallurgical Hot Work Tool Steel with Harmonic Structure by Mechanical Milling and Spark Plasma Sintering

    • Faraz Deirmina
    • Massimo Pellizzari
    • Matteo Federici

    OriginalPaper 26 January 2017 Pages: 1910 - 1920

    

36. Improving the Mechanical Properties of the Fusion Zone in Electron-Beam Welded Ti-5Al-5Mo-5V-3Cr Alloys

    • Christopher J. Marvel
    • Joseph C. Sabol
    • Wojciech Z. Misiolek

    OriginalPaper 17 January 2017 Pages: 1921 - 1930

    

37. Statistically Guided Development of Laser-Assisted Cold Spray for Microstructural Control of Ti-6Al-4V

    • Aaron M. Birt
    • Victor K. Champagne Jr.
    • Diran Apelian

    OriginalPaper 06 February 2017 Pages: 1931 - 1943

    

38. EIS Behavior of Experimental High-Strength Steel in Near-Neutral pH and Load Conditions

    • Jesus Israel Barraza-Fierro
    • Sergio Alonso Serna-Barquera
    • Homero Castaneda

    OriginalPaper 06 February 2017 Pages: 1944 - 1958

    

39. Formation of Widmanstätten Austenite in Strip Cast Grain-Oriented Silicon Steel

    • Hong-Yu Song
    • Hai-Tao Liu
    • John J. Jonas

    OriginalPaper 10 February 2017 Pages: 1959 - 1968

    

40. A Study of Interdiffusion in the Fe-C/Ti System Under Equilibrium and Nonequilibrium Conditions

    • T. N. Prasanthi
    • C. Sudha
    • S. Saroja

    OriginalPaper 06 February 2017 Pages: 1969 - 1980

    

41. Growth Mechanism of Primary and Eutectic TiB₂ Particles in a Hypereutectic Steel Matrix Composite

    • Z. C. Luo
    • B. B. He
    • M. X. Huang

    OriginalPaper 07 February 2017 Pages: 1981 - 1989

    

42. Nanoprecipitates and Their Strengthening Behavior in Al-Mg-Si Alloy During the Aging Process

    • Hui Li
    • Wenqing Liu

    OriginalPaper 27 January 2017 Pages: 1990 - 1998

    

43. The Influence of Al Content and Thickness on the Microstructure and Tensile Properties in High-Pressure Die Cast Magnesium Alloys

    • Erin Deda
    • Tracy D. Berman
    • John E. Allison

    OriginalPaper 20 January 2017 Pages: 1999 - 2014

    

44. Porosity, Microstructure, and Mechanical Properties of Ti-6Al-4V Alloy Parts Fabricated by Powder Compact Forging

    • Mingtu Jia
    • Deliang Zhang
    • Brian Gabbitas

    OriginalPaper 17 January 2017 Pages: 2015 - 2029

    

45. Precipitate Evolution and Strengthening in Supersaturated Rapidly Solidified Al-Sc-Zr Alloys

    • Kyle Deane
    • S. L. Kampe
    • P. G. Sanders

    OriginalPaper 06 February 2017 Pages: 2030 - 2039

    

46. Characterization of Al-Mg Alloy Aged at Low Temperatures

    • Gaosong Yi
    • David A. Cullen
    • Michael L. Free

    OriginalPaper 06 February 2017 Pages: 2040 - 2050

    

47. Indentation Pileup Behavior of Ti-6Al-4V Alloy: Experiments and Nonlocal Crystal Plasticity Finite Element Simulations

    • Fengbo Han
    • Bin Tang
    • Yong Feng

    OriginalPaper 17 January 2017 Pages: 2051 - 2061

    

48. Analysis of Particle-Stimulated Nucleation (PSN)-Dominated Recrystallization for Hot-Rolled 7050 Aluminum Alloy

    • Khaled F. Adam
    • Zhengdong Long
    • David P. Field

    OriginalPaper 20 January 2017 Pages: 2062 - 2076

    

49. Electrochemical Corrosion Behavior of Spray-Formed Boron-Modified Supermartensitic Stainless Steel

    • Guilherme Zepon
    • Ricardo P. Nogueira
    • Claudemiro Bolfarini

    OriginalPaper 30 January 2017 Pages: 2077 - 2089

    

50. The Effect of TiO₂ and B₂O₃ Additions on the Grain Growth of ZnO

    • Gökhan Hardal
    • Berat Yüksel Price

    OriginalPaper 06 February 2017 Pages: 2090 - 2098