1. Elimination of Elongated Bands by Clock Rolling in High-Purity Tantalum

   • C. Deng
   • S. F. Liu
   • Q. Liu

   Communication 09 September 2015 Pages: 5477 - 5481

   

2. Effect of Initial Grain Size on Microstructure and Mechanical Properties of Extruded Mg-9Al-0.6Zn Alloy

   • Sung Hyuk Park
   • Jun Ho Bae
   • Bong Sun You

   Communication 18 September 2015 Pages: 5482 - 5488

   

3. Visualization of Microstructural Factor Resisting the Cleavage-Crack Propagation in the Simulated Heat-Affected Zone of Bainitic Steel

   • Hidenori Terasaki
   • Yu Miyahara
   • Kotaro Hayashi

   Communication 28 September 2015 Pages: 5489 - 5493

   

4. TEM Observation of Martensite Layer at the Weld Interface of an A508III to Inconel 82 Dissimilar Metal Weld Joint

   • Z. R. Chen
   • Y. H. Lu

   Communication 13 October 2015 Pages: 5494 - 5498

   

5. Induction of Ball-Filled Pores in Electron Beam Freeform Fabrication of Ti-6-Al-4-V Alloy by Dissolved Gas and Metallic Vapor

   • Tao Chen
   • Shengyong Pang
   • Shuili Gong

   Communication 15 September 2015 Pages: 5499 - 5503

   

6. Microstructures and Hardness/Wear Performance of High-Carbon Stellite Alloys Containing Molybdenum

   • Rong Liu
   • J. H. Yao
   • Rachel Collier

   OriginalPaper 10 September 2015 Pages: 5504 - 5513

   

7. High Wear Resistance of White Cast Iron Treated by Novel Process: Principle and Mechanism

   • Xiaoshuai Jia
   • Xunwei Zuo
   • Yonghua Rong

   OriginalPaper 10 September 2015 Pages: 5514 - 5525

   

8. On the Nb-Ge Binary System

   • Ioannis Papadimitriou
   • Claire Utton
   • Panos Tsakiropoulos

   OriginalPaper 23 September 2015 Pages: 5526 - 5536

   

9. Residual Ferrite and Relationship Between Composition and Microstructure in High-Nitrogen Austenitic Stainless Steels

   • Qingchuan Wang
   • Yibin Ren
   • R. D. K. Misra

   OriginalPaper 21 September 2015 Pages: 5537 - 5545

   

10. Phase Transformations and Formation of Ultra-Fine Microstructure During Hydrogen Sintering and Phase Transformation (HSPT) Processing of Ti-6Al-4V

    • Pei Sun
    • Zhigang Zak Fang
    • Jun Lu

    OriginalPaper 08 September 2015 Pages: 5546 - 5560

    

11. Effect of Cooling Rate on Phase Transformations in a High-Strength Low-Alloy Steel Studied from the Liquid Phase

    • Thomas Dorin
    • Nicole Stanford
    • Peter Hodgson

    OriginalPaper 30 September 2015 Pages: 5561 - 5571

    

12. Microstructural Development and Ternary Interdiffusion in Ni-Mn-Ga Alloys

    • Le Zhou
    • Catherine Kammerer
    • Yongho Sohn

    OriginalPaper 10 September 2015 Pages: 5572 - 5587

    

13. The Effect of Hydrogen on Plasma Nitriding of Austenitic Stainless Steel: Kinetic Modeling

    • Teresa Moskalioviene
    • Arvaidas Galdikas

    OriginalPaper 01 October 2015 Pages: 5588 - 5595

    

14. The Portevin-Le Chatelier Effect in the Ni-Based Superalloy IN100

    • Patxi Fernandez-Zelaia
    • Benjamin S. Adair
    • Stephen D. Antolovich

    OriginalPaper 21 September 2015 Pages: 5596 - 5609

    

15. Creep Behavior, Deformation Mechanisms, and Creep Life of Mod.9Cr-1Mo Steel

    • Fujio ABE

    OriginalPaper 21 September 2015 Pages: 5610 - 5625

    

16. Tearing Resistance Properties of Cr-Mo Steels with Internal Hydrogen Determined by the Potential Drop Method

    • Shinji Konosu
    • Hidenori Shimazu
    • Ryohei Fukuda

    OriginalPaper 21 September 2015 Pages: 5626 - 5637

    

17. Activation Volume and Density of Mobile Dislocations in Plastically Deforming Zr-1pctSn-1pctNb-0.1pctFe Alloy

    • Apu Sarkar
    • J. K. Chakravartty

    OriginalPaper 11 September 2015 Pages: 5638 - 5643

    

18. Maintaining High Strength at High Temperature in a Mg-Y-Zn-Gd Alloy by Heat Treatments and Severe Deformation Processing

    • Gerardo Garcés
    • María A. Muñoz-Morris
    • Paloma Adeva

    OriginalPaper 15 September 2015 Pages: 5644 - 5655

    

19. Autonomous Repair Mechanism of Creep Damage in Fe-Au and Fe-Au-B-N Alloys

    • S. Zhang
    • C. Kwakernaak
    • N. H. van Dijk

    OriginalPaper Open access 06 October 2015 Pages: 5656 - 5670

    

20. Size Effects on Strength in the Transition from Single-to-Polycrystalline Behavior

    • Pradipta Ghosh
    • Atul H. Chokshi

    OriginalPaper 29 September 2015 Pages: 5671 - 5684

    

21. Characterization of Hydrogen-Related Fracture Behavior in As-Quenched Low-Carbon Martensitic Steel and Tempered Medium-Carbon Martensitic Steel

    • Akinobu Shibata
    • Tamotsu Murata
    • Nobuhiro Tsuji

    OriginalPaper 30 September 2015 Pages: 5685 - 5696

    

22. Correlation Between Microstructure and Mechanical Properties Before and After Reversion of Metastable Austenitic Stainless Steels

    • Gemma Fargas
    • Ana Zapata
    • Antonio Mateo

    OriginalPaper 28 September 2015 Pages: 5697 - 5707

    

23. The Initiation and Propagation of Dynamic Abnormal Grain Growth in Molybdenum

    • Philip J. Noell
    • Daniel L. Worthington
    • Eric M. Taleff

    OriginalPaper 14 October 2015 Pages: 5708 - 5718

    

24. Mechanical and Tribological Performance of Graphite/Silicon Nitride Composites: A Comparison between Pressureless and Spark Plasma Sinter Processing

    • Subrata Kr. Maiti
    • Soumya Sarkar
    • Probal Kumar Das

    OriginalPaper 13 October 2015 Pages: 5719 - 5726

    

25. Mechanical Properties and Microstructural Evolution of Simulated Heat-Affected Zones in Wrought Eglin Steel

    • Brett M. Leister
    • John N. DuPont
    • Rachel A. Abrahams

    OriginalPaper 10 September 2015 Pages: 5727 - 5746

    

26. Microstructure and Crystallographic Texture Variations in the Friction-Stir-Welded Al-Al₂O₃-B₄C Metal Matrix Composite Produced by Accumulative Roll Bonding

    • Mahyar Mohammadnezhad
    • Morteza Shamanian
    • Jerzy A. Szpunar

    OriginalPaper 28 September 2015 Pages: 5747 - 5755

    

27. Effect of Bonding Temperature on Phase Transformation of Diffusion-Bonded Joints of Duplex Stainless Steel and Ti-6Al-4V Using Nickel and Copper as Composite Intermediate Metals

    • Sukumar Kundu
    • Gopinath Thirunavukarasu
    • Brajendra Mishra

    OriginalPaper 15 September 2015 Pages: 5756 - 5771

    

28. Transient Liquid Phase Bonding Single-Crystal Superalloys with Orientation Deviations: Creep Properties

    • Naicheng Sheng
    • Jide Liu
    • Zhuangqi Hu

    OriginalPaper 15 September 2015 Pages: 5772 - 5781

    

29. The Effect of Temperature and Rotational Speed on Structure and Mechanical Properties of Cast Cu Base Alloy (Cu-Al-Si-Fe) Welded by Semisolid Stir Joining Method

    • Keyvan Ferasat
    • Hossein Aashuri
    • Siamak Nikzad

    OriginalPaper 16 September 2015 Pages: 5782 - 5788

    

30. Mechanical Properties and Microstructure of Dissimilar Friction Stir Welds of 11Cr-Ferritic/Martensitic Steel to 316 Stainless Steel

    • Yutaka S. Sato
    • Hiroyuki Kokawa
    • Yoshihiro Sekio

    OriginalPaper 10 September 2015 Pages: 5789 - 5800

    

31. Thermal Contact Conductance Analysis of Nitride and Carbonitride Thin Film Coatings for Thermal Interface Material Application

    • Shanmugan Subramani
    • Lee Yuan Thing
    • Mutharasu Devarajan

    OriginalPaper 21 September 2015 Pages: 5801 - 5809

    

32. Nano- and Macro-wear of Bio-carbo-nitrided AISI 8620 Steel Surfaces

    • Emmanuel Kwesi Arthur
    • Edward Ampaw
    • W. O. Soboyejo

    OriginalPaper 13 October 2015 Pages: 5810 - 5829

    

33. Precipitation Strengthening in Al-Ni-Mn Alloys

    • Yangyang Fan
    • Kai Huang
    • Makhlouf M. Makhlouf

    OriginalPaper 11 September 2015 Pages: 5830 - 5841

    

34. Optimization of the Homogenization Heat Treatment of Nickel-Based Superalloys Based on Phase-Field Simulations: Numerical Methods and Experimental Validation

    • Ralf Rettig
    • Nils C. Ritter
    • Robert F. Singer

    OriginalPaper 24 September 2015 Pages: 5842 - 5855

    

35. Application of the Eyring Equation in the Evaluation of Semi-Solid Forming-Induced Si Particle Refinement in the Hypereutectic Al-Si Alloys

    • Yasuyoshi Fukui
    • Daisaku Nara
    • Noriyoshi Kumazawa

    OriginalPaper 09 September 2015 Pages: 5856 - 5863

    

36. Structure, Mechanical Properties, and Fracture Behavior of a Fe-Cr-V Alloy Doped with Nitrogen by High-Temperature Gas-Phase Nitriding

    • Sergey A. Nikulin
    • Vladimir M. Khatkevich
    • Kristina S. Denisenko

    OriginalPaper 21 September 2015 Pages: 5864 - 5870

    

37. Deformation Behavior and Microstructure Evolution of the Cu-2Ni-0.5Si-0.15Ag Alloy During Hot Compression

    • Yi Zhang
    • Alex A. Volinsky
    • Hai T. Tran

    OriginalPaper 14 September 2015 Pages: 5871 - 5876

    

38. Two-Step SPD Processing of a Trimodal Al-Based Nano-Composite

    • Yuzheng Zhang
    • Shima Sabbaghianrad
    • Steven R. Nutt

    OriginalPaper 14 September 2015 Pages: 5877 - 5886

    

39. An In Situ Study of Sintering Behavior and Phase Transformation Kinetics in NiTi Using Neutron Diffraction

    • Gang Chen
    • Klaus-Dieter Liss
    • Peng Cao

    OriginalPaper 15 September 2015 Pages: 5887 - 5899

    

40. A Processing Map for Hot Deformation of an Ultrafine-Grained Aluminum-Magnesium-Silicon Alloy Prepared by Mechanical Milling and Hot Extrusion

    • Hamed Asgharzadeh
    • Masoud Rahbar Niazi
    • Abdolreza Simchi

    OriginalPaper 22 September 2015 Pages: 5900 - 5908

    

41. Effect of Y₂O₃ Addition on Oxidation Behavior of W-Cr Alloys

    • Suresh Telu
    • Rahul Mitra
    • Shyamal Kumar Pabi

    OriginalPaper 05 October 2015 Pages: 5909 - 5919

    

42. The Development of Grain Structure During Axisymmetric Extrusion of AA3003 Aluminum Alloys

    • Yahya Mahmoodkhani
    • Mary A. Wells
    • Nick Parson

    OriginalPaper 28 September 2015 Pages: 5920 - 5932

    

43. Orientation Dependence of the Deformation Microstructure in a Fe-30Ni-Nb Model Austenitic Steel Subjected to Hot Uniaxial Compression

    • Debasis Poddar
    • Pavel Cizek
    • Peter D. Hodgson

    OriginalPaper 01 October 2015 Pages: 5933 - 5951

    

44. Tensile and Dry Sliding Wear Behavior of In-Situ Al₃Zr + Al₂O₃-Reinforced Aluminum Metal Matrix Composites

    • G. Gautam
    • A. K. Ghose
    • I. Chakrabarty

    OriginalPaper 30 September 2015 Pages: 5952 - 5961

    

45. Exploring Mg-Zn-Ca-Based Bulk Metallic Glasses for Biomedical Applications Based on Thermodynamic Approach

    • M. Ramya
    • Syed Ghazi Sarwat
    • K. R. Ravi

    OriginalPaper 23 September 2015 Pages: 5962 - 5971

    

46. Thermodynamics-Based Selection and Design of Creep-Resistant Cast Mg Alloys

    • Saeideh Abaspour
    • Carlos H. Cáceres

    OriginalPaper 14 September 2015 Pages: 5972 - 5988

    

47. Microstructure and Texture Evolution in Double-Cone Samples of Ti-6Al-4V Alloy with Colony Preform Microstructure

    • Kun Vanna Yang
    • Chao Voon Samuel Lim
    • Christopher H. Davies

    OriginalPaper 22 September 2015 Pages: 5989 - 6002

    

48. Hot Tearing Susceptibility of Mg-Ca Binary Alloys

    • Jiangfeng Song
    • Zhi Wang
    • Norbert Hort

    OriginalPaper 14 October 2015 Pages: 6003 - 6017

    

49. An Extended Age-Hardening Model for Al-Mg-Si Alloys Incorporating the Room-Temperature Storage and Cold Deformation Process Stages

    • Ole Runar Myhr
    • Øystein Grong
    • Carmen Schäfer

    OriginalPaper Open access 01 October 2015 Pages: 6018 - 6039

    

50. Three-Dimensional Numerical Model Considering Phase Transformation in Friction Stir Welding of Steel

    • Hoon-Hwe Cho
    • Dong-Wan Kim
    • Heung Nam Han

    OriginalPaper 28 September 2015 Pages: 6040 - 6051