1. Investigation of Deformation Mechanisms in β-Type Ti-35Nb-2Ta-3Zr Alloy via FSP Leading to Surface Strengthening

   • Liqiang Wang
   • Jiao Qu
   • Weijie Lu

   Communication 19 August 2015 Pages: 4813 - 4818

   

2. Effects of MC-Type Carbide Forming and Graphitizing Elements on Thermal Fatigue Behavior of Indefinite Chilled Cast Iron Rolls

   • Godwin Kwame Ahiale
   • Won-Doo Choi
   • Yong-Jun Oh

   Communication 25 August 2015 Pages: 4819 - 4827

   

3. Relationship Between Damping Capacity and Variations of Vacancies Concentration and Segregation of Carbon Atom in an Fe-Mn Alloy

   • Yuhua Wen
   • Hongxing Xiao
   • Dierk Raabe

   Communication 29 August 2015 Pages: 4828 - 4833

   

4. Microcompression Behaviors of Single Crystals Simulated by Crystal Plasticity Finite Element Method

   • Jae-Ho Jung
   • Young-Sang Na
   • Yoon Suk Choi

   Communication 04 September 2015 Pages: 4834 - 4840

   

5. Kinetics of Solute Partitioning During Intercritical Annealing of a Medium-Mn Steel

   • H. Kamoutsi
   • E. Gioti
   • H. Ding

   Communication 01 September 2015 Pages: 4841 - 4846

   

6. Foreword

   • Zhongyun Fan

   Symposium: ICASP-4 (International Conference on Advanced Solidification Processing) 02 September 2015 Pages: 4847 - 4847

7. Sixty Years of Casting Research

   • John Campbell

   Symposium: ICASP-4 (International Conference on Advanced Solidification Processing) 19 May 2015 Pages: 4848 - 4853

8. On Macrosegregation

   • Andreas Ludwig
   • Menghuai Wu
   • Abdellah Kharicha

   Symposium: ICASP-4 (International Conference on Advanced Solidification Processing) 19 May 2015 Pages: 4854 - 4867

   

9. The Contribution of Constitutional Supercooling to Nucleation and Grain Formation

   • D. H. StJohn
   • A. Prasad
   • M. Qian

   Symposium: ICASP-4 (International Conference on Advanced Solidification Processing) 20 May 2015 Pages: 4868 - 4885

   

10. Simulation of Channel Segregation During Directional Solidification of In—75 wt pct Ga. Qualitative Comparison with In Situ Observations

    • Ali Saad
    • Charles-André Gandin
    • Sven Eckert

    Symposium: ICASP-4 (International Conference on Advanced Solidification Processing) 20 May 2015 Pages: 4886 - 4897

    

11. Analysis of Melt Undercooling and Crystallization Kinetics

    • John H. Perepezko
    • Mark K. Hoffmeyer
    • Michael P. De Cicco

    Symposium: ICASP-4 (International Conference on Advanced Solidification Processing) 30 May 2015 Pages: 4898 - 4907

    

12. Recent Developments in Modeling Heteroepitaxy/Heterogeneous Nucleation by Dynamical Density Functional Theory

    • Frigyes Podmaniczky
    • Gyula I. Tóth
    • László Gránásy

    Symposium: ICASP-4 (International Conference on Advanced Solidification Processing) 09 June 2015 Pages: 4908 - 4920

    

13. Containerless Undercooled Melts: Ordering, Nucleation, and Dendrite Growth

    • Dieter M. Herlach
    • Sven Binder
    • Thomas Volkmann

    Symposium: ICASP-4 (International Conference on Advanced Solidification Processing) 15 August 2015 Pages: 4921 - 4936

    

14. Influence of Mg on Solidification of Hypereutectic Cast Iron: X-ray Radiography Study

    • K. Yamane
    • Hideyuki Yasuda
    • Y. Suzuki

    Symposium: ICASP-4 (International Conference on Advanced Solidification Processing) 25 July 2015 Pages: 4937 - 4946

    

15. Martensite Transformation and Magnetic Properties of Ni-Fe-Ga Heusler Alloys

    • Hrusikesh Nath
    • Gandham Phanikumar

    OriginalPaper 26 August 2015 Pages: 4947 - 4955

    

16. Experimental Investigation of the Phase Equilibria of the Zn-Al-Zr Ternary System at 723 K (450 °C)

    • Liangping Chen
    • Fucheng Yin
    • Zhi Li

    OriginalPaper 01 September 2015 Pages: 4956 - 4965

    

17. Effect of Prior Recovery Treatment on the Evolution of Cube Texture During Annealing of Severely Warm-Rolled Al-2.5 wt pctMg Alloy

    • J. R. Gatti
    • Pinaki Prasad Bhattacharjee

    OriginalPaper 08 September 2015 Pages: 4966 - 4977

    

18. Prediction and Validation of the Austenite Phase Fraction upon Intercritical Annealing of Medium Mn Steels

    • Hussein Farahani
    • Wei Xu
    • Sybrand van der Zwaag

    OriginalPaper Open access 11 August 2015 Pages: 4978 - 4985

    

19. Calorimetric Study of Phase Stability and Phase Transformation in U-xZr (x = 2, 5, 10 wt pct) Alloys

    • Arun Kumar Rai
    • Raju Subramanian
    • Saroja Saibaba

    OriginalPaper 08 September 2015 Pages: 4986 - 5001

    

20. Determination of Pressure Effects on the α → γ Phase Transition and Size of Fe in Nd-Fe-B Spring Exchange Magnets

    • Manuel Abuin
    • Zafer Turgut
    • Michael E. McHenry

    OriginalPaper 03 September 2015 Pages: 5002 - 5010

    

21. Surface Hardening and Nitride Precipitation in the Nitriding of Fe-M1-M2 Ternary Alloys Containing Al, V, or Cr

    • Goro Miyamoto
    • Shotaro Suetsugu
    • Tadashi Furuhara

    OriginalPaper 03 September 2015 Pages: 5011 - 5020

    

22. A Constitutive Equation Relating Composition and Microstructure to Properties in Ti-6Al-4V: As Derived Using a Novel Integrated Computational Approach

    • Iman Ghamarian
    • Peyman Samimi
    • Peter C. Collins

    OriginalPaper 11 August 2015 Pages: 5021 - 5037

    

23. Intergranular Strain Evolution in Titanium During Tensile Loading: Neutron Diffraction and Polycrystalline Model

    • David Gloaguen
    • Guy Oum
    • Winfried Kockelmann

    OriginalPaper 28 July 2015 Pages: 5038 - 5046

    

24. Mechanical Behavior of Ultrafine-Grained Ti-6Al-4V Alloy Produced by Severe Warm Rolling: The Influence of Starting Microstructure and Reduction Ratio

    • Zhiming Li
    • Yanle Sun
    • Aidang Shan

    OriginalPaper 04 August 2015 Pages: 5047 - 5057

    

25. Deformation Twinning in Zirconium: Direct Experimental Observations and Polycrystal Plasticity Predictions

    • Jaiveer Singh
    • Sivasambu Mahesh
    • I. Samajdar

    OriginalPaper 14 August 2015 Pages: 5058 - 5071

    

26. Indentation Fracture Resistance Vs Conventional Fracture Toughness of Carbon Nanotube/Alumina Nanocomposites

    • Soumya Sarkar
    • Probal Kumar Das

    OriginalPaper 18 August 2015 Pages: 5072 - 5079

    

27. On the Mechanisms of Different Work-Hardening Stages in Twinning-Induced Plasticity Steels

    • Peng Zhou
    • Ming Xin Huang

    OriginalPaper 25 August 2015 Pages: 5080 - 5090

    

28. Evaluation of Solid-Solution Hardening of Fe-27 at. pct Al by Vanadium and Comparison to Precipitation Strengthening by Vanadium Carbides

    • Petr Kratochvíl
    • Josef Pešička
    • Martin Palm

    OriginalPaper 27 August 2015 Pages: 5091 - 5094

    

29. The Tensile Mechanical Properties of Thermomechanically Consolidated Titanium at Different Strain Rates

    • Cun Liang
    • Mingxing Ma
    • Deliang Zhang

    OriginalPaper 27 August 2015 Pages: 5095 - 5102

    

30. Microstructure Evolution Associated with a Superior Low-Cycle Fatigue Resistance of the Fe-30Mn-4Si-2Al Alloy

    • Ilya Nikulin
    • Takahiro Sawaguchi
    • Kaneaki Tsuzaki

    OriginalPaper 02 September 2015 Pages: 5103 - 5113

    

31. Cyclic-Tension Fatigue Behavior in a SS400 Steel Plate Studied Using Ultrasonic Linear and Nonlinear Techniques

    • Hideki Yamagishi
    • Mikio Fukuhara

    OriginalPaper 08 September 2015 Pages: 5114 - 5125

    

32. A Microstructural Study on the Observed Differences in Charpy Impact Behavior Between Hot Isostatically Pressed and Forged 304L and 316L Austenitic Stainless Steel

    • Adam J. Cooper
    • Norman I. Cooper
    • Andrew H. Sherry

    OriginalPaper Open access 03 September 2015 Pages: 5126 - 5138

    

33. Introducing the Santolina chamaecyparissus Extract as a Suitable Green Inhibitor for 304 Stainless Steel Corrosion in Strong Acidic Medium

    • Mehdi Shabani-Nooshabadi
    • Maryam-Sadat Ghandchi

    OriginalPaper 01 September 2015 Pages: 5139 - 5148

    

34. Dissimilar Laser Welding/Brazing of 5754 Aluminum Alloy to DP 980 Steel: Mechanical Properties and Interfacial Microstructure

    • Jin Yang
    • Yulong Li
    • Norman Zhou

    OriginalPaper 28 July 2015 Pages: 5149 - 5157

    

35. Investigation of Strength Recovery in Welds of NUCu-140 Steel Through Multipass Welding and Isothermal Post-Weld Heat Treatments

    • Jason T. Bono
    • John N. DuPont
    • David N. Seidman

    OriginalPaper 21 August 2015 Pages: 5158 - 5170

    

36. The Effect of Oscillating Traverse Welding on Performance of Cr-Fe-C Hardfacing Alloys

    • Hsuan-Han Lai
    • Chih-Chun Hsieh
    • Weite Wu

    OriginalPaper 18 August 2015 Pages: 5171 - 5181

    

37. Microstructure and Mechanical Properties of Friction Stir Spot-Welded IF/DP Dissimilar Steel Joints

    • Rajarshi Sarkar
    • Shiladitya Sengupta
    • Mahadev Shome

    OriginalPaper 08 September 2015 Pages: 5182 - 5200

    

38. Influence of Microstructure and Process Conditions on Simultaneous Low-Temperature Surface Hardening and Bulk Precipitation Hardening of Nanoflex^®

    • Federico Bottoli
    • Grethe Winther
    • Marcel A. J. Somers

    OriginalPaper 18 August 2015 Pages: 5201 - 5216

    

39. Structure, Microsegregation, and Precipitates of an Alloy 690 ESR Ingot in Industrial Scale

    • Min Wang
    • Xiangdong Zha
    • Yiyi Li

    OriginalPaper 27 August 2015 Pages: 5217 - 5231

    

40. In Situ Observation of the Competition Between Metastable and Stable Phases in Solidification of Undercooled Fe-17at. pctB Alloy Melt

    • Di Zhang
    • Junfeng Xu
    • Feng Liu

    OriginalPaper 03 September 2015 Pages: 5232 - 5239

    

41. Experimental Verification of a Critical Condition for the Formation of As-Cast Coarse Columnar Austenite Grain Structure in a Hyperperitectic Carbon Steel

    • Munekazu Ohno
    • Masato Maruyama
    • Kiyotaka Matsuura

    OriginalPaper 03 September 2015 Pages: 5240 - 5247

    

42. Interaction Between Recovery, Recrystallization, and NbC Strain-Induced Precipitation in High-Mn Steels

    • Laura Llanos
    • Beatriz Pereda
    • Beatriz López

    OriginalPaper 11 August 2015 Pages: 5248 - 5265

    

43. High-Temperature Mechanical Integrity of Cu-Sn SLID Wafer-Level Bonds

    • Thi-Thuy Luu
    • Nils Hoivik
    • Astrid-Sofie B. Vardøy

    OriginalPaper 28 July 2015 Pages: 5266 - 5274

    

44. The Origin of Fracture in the I-ECAP of AZ31B Magnesium Alloy

    • Michal Gzyl
    • Andrzej Rosochowski
    • Muhammad Jawad Qarni

    OriginalPaper 29 July 2015 Pages: 5275 - 5284

    

45. Liquid Phase Sintering of Boron-Containing Powder Metallurgy Steel with Chromium and Carbon

    • Ming-Wei Wu
    • Yu-Chi Fan
    • Wen-Zhang Cai

    OriginalPaper 20 August 2015 Pages: 5285 - 5295

    

46. Microstructural and Texture Development in Two Austenitic Steels with High-Manganese Content

    • Basudev Bhattacharya
    • Ranjit Kumar Ray
    • Torben Leffers

    OriginalPaper 28 August 2015 Pages: 5296 - 5307

    

47. Austenite Grain Growth and Precipitate Evolution in a Carburizing Steel with Combined Niobium and Molybdenum Additions

    • Charles M. Enloe
    • Kip O. Findley
    • John G. Speer

    OriginalPaper 27 August 2015 Pages: 5308 - 5328

    

48. High-Temperature Flow Stress and Recrystallization Characteristics of Al-Bearing Microalloyed TWIP Steels

    • Mahesh Chandra Somani
    • David A. Porter
    • L. Pentti Karjalainen

    OriginalPaper 03 September 2015 Pages: 5329 - 5342

    

49. Fast Salt Bath Heat Treatment for a Bainitic/Martensitic Low-Carbon Low-Alloyed Steel

    • Julia Urbanec
    • Ari Saastamoinen
    • Seppo Louhenkilpi

    OriginalPaper 01 September 2015 Pages: 5343 - 5349

    

50. Texture Evolution of a Non-oriented Electrical Steel Cold Rolled at Directions Different from the Hot Rolling Direction

    • Youliang He
    • Erik Hilinski
    • Jian Li

    OriginalPaper 08 September 2015 Pages: 5350 - 5365