1. Ag Whisker Formation in Ag-In-Se Alloys

   • Sinn-wen Chen
   • Jhe-Yu Lin
   • Chao-hong Wang

   Communication 08 October 2013 Pages: 5281 - 5283

   

2. On the Phenomenon of Stress Drop During Hot Deformation of ZrTiAlV Alloy

   • Yuanbiao Tan
   • Wenchang Liu
   • Xiangyi Zhang

   Communication 28 September 2013 Pages: 5284 - 5288

   

3. Correlation Between the Microstructural Development of Bainitic Ferrite and the Characteristics of Martensite-Austenite Constituent

   • Hidenori Terasaki
   • Yu-ichi Komizo

   Communication 01 October 2013 Pages: 5289 - 5293

   

4. Foreword

   • Mark R. Jolly
   • Brian Thomas
   • Carl Reilly

   Symposium: Defects and Properties of Cast Metals 25 September 2013 Pages: 5294 - 5294

5. Flux Entrapment and Titanium Nitride Defects in Electroslag Remelting of INCOLOY Alloys 800 and 825

   • Jonathan D. Busch
   • John J. deBarbadillo
   • Matthew J. M. Krane

   Symposium: Defects and Properties of Cast Metals 20 February 2013 Pages: 5295 - 5303

   

6. Development of a 3D Filling Model of Low-Pressure Die-Cast Aluminum Alloy Wheels

   • Jianglan Duan
   • Daan Maijer
   • Carl Reilly

   Symposium: Defects and Properties of Cast Metals 15 February 2013 Pages: 5304 - 5315

   

7. Effect of Porosity on Deformation, Damage, and Fracture of Cast Steel

   • R. A. Hardin
   • C. Beckermann

   Symposium: Defects and Properties of Cast Metals 28 February 2013 Pages: 5316 - 5332

   

8. Effects of Section Size, Surface Cooling Conditions, and Crucible Material on Microstructure and As-Cast Properties of Investment Cast Co-Cr Biomedical Alloy

   • Ruth Kaiser
   • Kenny Williamson
   • David J. Browne

   Symposium: Defects and Properties of Cast Metals 14 June 2013 Pages: 5333 - 5342

   

9. Deformation Prediction of a Heavy Hydro Turbine Blade During the Casting Process with Consideration of Martensitic Transformation

   • Jinwu Kang
   • Tianjiao Wang
   • Baicheng Liu

   Symposium: Defects and Properties of Cast Metals 29 June 2013 Pages: 5343 - 5353

   

10. Reasonable Temperature Schedules for Cold or Hot Charging of Continuously Cast Steel Slabs

    • Yang Li
    • Xin Chen
    • Jiaquan Zhang

    Symposium: Defects and Properties of Cast Metals 12 July 2013 Pages: 5354 - 5364

    

11. A Multiscale 3D Model of the Vacuum Arc Remelting Process

    • Koulis Pericleous
    • Georgi Djambazov
    • Peter D. Lee

    Symposium:Defects and Properties of Cast Metals 15 March 2013 Pages: 5365 - 5376

    

12. Identification of Defect Prone Peritectic Steel Grades by Analyzing High-Temperature Phase Transformations

    • Peter Presoly
    • Robert Pierer
    • Christian Bernhard

    Symposium: Defects and Properties of Cast Metals 08 March 2013 Pages: 5377 - 5388

    

13. Synchrotron Tomographic Characterization of Damage Evolution During Aluminum Alloy Solidification

    • Chedtha Puncreobutr
    • Peter D. Lee
    • Thomas Connolley

    Symposium: Defects and Properties of Cast Metals 11 December 2012 Pages: 5389 - 5395

    

14. Hot Tear Susceptibility of Al-Mg-Si-Fe Alloys with Varying Iron Contents

    • Lisa Sweet
    • Mark A. Easton
    • David H. StJohn

    Symposium: Defects and Properties of Cast Metals 11 December 2012 Pages: 5396 - 5407

    

15. Detection and Influence of Shrinkage Pores and Nonmetallic Inclusions on Fatigue Life of Cast Aluminum Alloys

    • Yakub Tijani
    • André Heinrietz
    • Patrick Voigt

    Symposium: Defects and Properties of Cast Metals 23 May 2013 Pages: 5408 - 5415

    

16. Effect of Different Casting Parameters on the Cleanliness of High Manganese Steel Ingots Compared to High Carbon Steel

    • Petrico von Schweinichen
    • Zhiye Chen
    • Alexander Lob

    Symposium: Defects and Properties of Cast Metals 22 August 2013 Pages: 5416 - 5423

    

17. Liquidus Projection of the Ternary Bi-Sb-Te Thermoelectric Material System

    • Chih-hao Liu
    • Hsin-jay Wu
    • Sinn-wen Chen

    OriginalPaper 23 July 2013 Pages: 5424 - 5433

    

18. Effect of Destabilizing Heat Treatment on Solid-State Phase Transformation in High-Chromium Cast Irons

    • Vasily Efremenko
    • Kazumichi Shimizu
    • Yuliia Chabak

    OriginalPaper 31 July 2013 Pages: 5434 - 5446

    

19. Bainite Formation Kinetics During Isothermal Holding in Modified High Cr Ferritic Steel

    • Chenxi Liu
    • Yongchang Liu
    • Zesheng Yan

    OriginalPaper 30 July 2013 Pages: 5447 - 5455

    

20. Volume Fractions of Proeutectoid Ferrite/Pearlite and Their Dependence on Prior Austenite Grain Size in Hypoeutectoid Fe-Mn-C Alloys

    • Zhen-Qing Liu
    • Goro Miyamoto
    • Tadashi Furuhara

    OriginalPaper 20 July 2013 Pages: 5456 - 5467

    

21. Mechanism and Kinetics of Solid-State Transformation in High-Temperature Processed Linepipe Steel

    • Pei Yan
    • H. K. D. H. Bhadeshia

    OriginalPaper 01 August 2013 Pages: 5468 - 5477

    

22. Size Effects in Thin Face-Centered Cubic Metals for Different Complex Forming Loadings

    • Pierre-Antoine Dubos
    • Eric Hug
    • Clément Keller

    OriginalPaper 23 July 2013 Pages: 5478 - 5487

    

23. Shot-Peening Effect on High Cycling Fatigue of Al-Cu Alloy

    • Yasser Fouad
    • Mostafa El Metwally

    OriginalPaper 31 July 2013 Pages: 5488 - 5492

    

24. Corrosion Inhibitive Evaluation of an Environmentally Friendly Water-Base Acrylic Terpolymer on Mild Steel in Hydrochloric Acid Media

    • Mojtaba Vakili Azghandi
    • Ali Davoodi
    • Ali Kosari

    OriginalPaper 21 August 2013 Pages: 5493 - 5504

    

25. Effect of Multipasses on Microstructure and Electrochemical Behavior of Weldments

    • Muhammad Atif Makhdoom
    • Muhammad Kamran
    • Sehrish Mukhtar

    OriginalPaper 02 August 2013 Pages: 5505 - 5512

    

26. Effect of Cooling Rate on the Microstructure of Laser-Remelted INCONEL 718 Coating

    • Yaocheng Zhang
    • Zhuguo Li
    • Yixiong Wu

    OriginalPaper 13 August 2013 Pages: 5513 - 5521

    

27. Dendritic Growth Morphologies in Al-Zn Alloys—Part I: X-ray Tomographic Microscopy

    • JONATHAN Friedli
    • J. L. Fife
    • M. Rappaz

    OriginalPaper 20 August 2013 Pages: 5522 - 5531

    

28. Dendritic Growth Morphologies in Al-Zn Alloys—Part II: Phase-Field Computations

    • J. A. Dantzig
    • Paolo Di Napoli
    • M. Rappaz

    OriginalPaper 05 September 2013 Pages: 5532 - 5543

    

29. Solidification of the Cu-35wt pct Fe Alloys with Liquid Separation

    • Junting Zhang
    • Xiaochao Cui
    • Youhong Wang

    OriginalPaper 13 August 2013 Pages: 5544 - 5548

    

30. Hot Deformation Behavior and Microstructural Evolution of a Nickel-Free Austenitic Steel with High Nitrogen Content

    • Ersoy Erisir
    • Ulrich Prahl
    • Wolfgang Bleck

    OriginalPaper 23 July 2013 Pages: 5549 - 5555

    

31. Effect of Equal Channel Angular Pressing on Lamellar Microstructures in Nickel Aluminum Bronze

    • Daniel T. McDonald
    • Cameron J. Barr
    • Kenong Xia

    OriginalPaper 06 September 2013 Pages: 5556 - 5566

    

32. Developing the Processing Maps Using the Hyperbolic Sine Constitutive Equation

    • Amir Momeni
    • Kamran Dehghani
    • Shahab Kazemi

    OriginalPaper 28 June 2013 Pages: 5567 - 5576

    

33. Influence of Post-Laser Welding Heat Treatment on Assembling Performance of Aluminum Alloy Structure

    • Guillaume Tirand
    • Corinne Arvieu
    • Jean-Michel Quenisset

    OriginalPaper 27 September 2013 Pages: 5577 - 5586

    

34. Fabrication of Sn-Ag/CeO₂ Electro-Composite Solder by Pulse Electrodeposition

    • Ashutosh Sharma
    • Sumit Bhattacharya
    • Karabi Das

    OriginalPaper 27 July 2013 Pages: 5587 - 5601

    

35. Effect of Texture and Grain Size on Bio-Corrosion Response of Ultrafine-Grained Titanium

    • N. P. Gurao
    • Geetha Manivasagam
    • Satyam Suwas

    OriginalPaper 13 August 2013 Pages: 5602 - 5610

    

36. Thermal Stability of Nanocrystalline Copper Alloyed with Antimony

    • Mark A. Atwater
    • Suhrit Mula
    • Carl C. Koch

    OriginalPaper 25 July 2013 Pages: 5611 - 5616