1. Precipitation of Second Phases in High-Interstitial-Alloyed Austenitic Steel

   • Tae-Ho Lee
   • Heon-Young Ha
   • Sung-Joon Kim

   Communication 12 October 2011 Pages: 3543 - 3548

   

2. Correlation between solid-state transformations and solidification in Ni-Mn-Ga alloys

   • Junyi Liu
   • Jingmin Wang
   • Huibin Xu

   Communication 21 September 2011 Pages: 3549 - 3553

   

3. Discussion on the Alloying Element Partition and Growth Kinetics of Proeutectoid Ferrite in Fe-C-Mn-X Alloys

   • R. Wei
   • M. Enomoto

   Communication 23 September 2011 Pages: 3554 - 3557

   

4. Grain Boundary Behavior in an Ultrafine-Grained Aluminum Alloy

   • P. S. De
   • R. S. Mishra

   Communication 05 October 2011 Pages: 3558 - 3561

   

5. Carbide Formation and Growth Kinetics Enhanced by Tensile Stress and Elevated Temperature Intergranular Cracking in 2.25Cr-1.5W Heat-Resistant Steels

   • N. H. Heo
   • J. C. Chang

   Communication 08 October 2011 Pages: 3562 - 3566

   

6. Martensite Formation in Hydrogen-Containing Metastable Austenitic Stainless Steel During Micro-Tension Testing

   • Yoji Mine
   • Koichi Hirashita
   • Kazuki Takashima

   Communication 06 October 2011 Pages: 3567 - 3571

   

7. Effects of Copper on the Hardenability of a Medium-Carbon Steel

   • Erik J. Pavlina
   • Seok-Jae Lee
   • Chester J. Van Tyne

   Communication 23 September 2011 Pages: 3572 - 3576

   

8. Hydrogen Uptake Enhancement and Accelerated Hydrogen Re-embrittlement of Cd-plated AISI 4340 Steel Bolts Coupled with IN718 Nuts

   • Gian Franco Lovicu
   • Costanza Colombo
   • Renzo Valentini

   Communication 15 September 2011 Pages: 3577 - 3580

   

9. Flexible Bamboo-Structured NiCoMnIn Microfibers with Magnetic-Field-Induced Reverse Martensite Transformation

   • Y. Z. Ji
   • Z. H. Nie
   • J. F. Sun

   Communication 16 September 2011 Pages: 3581 - 3584

   

10. Fabrication of A1050-A6061 Functionally Graded Aluminum Foam by Friction Stir Processing Route

    • Yoshihiko Hangai
    • Yutaro Oba
    • Takao Utsunomiya

    Communication 08 October 2011 Pages: 3585 - 3589

    

11. Foreword: Symposium on Austenite Formation and Decomposition IV

    • Amy J. Clarke
    • Francisca G. Caballero
    • Robert E. Hackenberg

    News 30 August 2011 Pages: 3590 - 3590

12. Analysis of Microstructure Evolution in Quenching and Partitioning Automotive Sheet Steel

    • John G. Speer
    • E. De Moor
    • D. V. Edmonds

    Symposium: Austenite Formation and Decomposition IV 15 September 2011 Pages: 3591 - 3601

    

13. Application of a Three-Dimensional Microstructure Evolution Model to Identify Key Process Settings for the Production of Dual-Phase Steels

    • C. Bos
    • M. G. Mecozzi
    • J. Sietsma

    Symposium: Austenite Formation and Decomposition IV 13 April 2011 Pages: 3602 - 3610

    

14. Nitrogen Effects in Dual-Phase Sheet Steel

    • Tyson W. Brown
    • John G. Speer
    • Dennis M. Haezebrouck

    Symposium: Austenite Formation and Decomposition IV 30 August 2011 Pages: 3611 - 3619

    

15. Overview of Mechanisms Involved During the Quenching and Partitioning Process in Steels

    • M. J. Santofimia
    • L. Zhao
    • J. Sietsma

    Symposium: Austenite Formation and Decomposition IV Open access 26 April 2011 Pages: 3620 - 3626

    

16. Stability of Retained Austenite in High-Al, Low-Si TRIP-Assisted Steels Processed via Continuous Galvanizing Heat Treatments

    • J. R. McDermid
    • H. S. Zurob
    • Y. Bian

    Symposium: Austenite Formation and Decomposition IV 06 April 2011 Pages: 3627 - 3637

    

17. Localized Deformation in Multiphase, Ultra-Fine-Grained 6 Pct Mn Transformation-Induced Plasticity Steel

    • Seawoong Lee
    • Seok-Jae Lee
    • B. C. De Cooman

    Symposium: Austenite Formation and Decomposition IV 24 February 2011 Pages: 3638 - 3651

    

18. Quenched and Partitioned Microstructures Produced via Gleeble Simulations of Hot-Strip Mill Cooling Practices

    • G. A. Thomas
    • J. G. Speer
    • D. K. Matlock

    Symposium: Austenite Formation and Decomposition IV 09 March 2011 Pages: 3652 - 3659

    

19. Atom Probe Tomography Analysis of Precipitation during Tempering of a Nanostructured Bainitic Steel

    • F. G. Caballero
    • M. K. Miller
    • C. Garcia-Mateo

    Symposium: Austenite Formation and Decomposition IV 13 April 2011 Pages: 3660 - 3668

    

20. Strength Recovery in a High-Strength Steel During Multiple Weld Thermal Simulations

    • Xinghua Yu
    • Jeremy L. Caron
    • David N. Seidman

    Symposium: Austenite Formation and Decomposition IV 27 April 2011 Pages: 3669 - 3679

    

21. Effect of Heating Rate on the Austenite Formation in Low-Carbon High-Strength Steels Annealed in the Intercritical Region

    • R. R. Mohanty
    • O. A. Girina
    • N. M. Fonstein

    Symposium: Austenite Formation and Decomposition IV 09 June 2011 Pages: 3680 - 3690

    

22. Austenite Stability Effects on Tensile Behavior of Manganese-Enriched-Austenite Transformation-Induced Plasticity Steel

    • P. J. Gibbs
    • E. De Moor
    • D. K. Matlock

    Symposium: Austenite Formation and Decomposition IV 27 April 2011 Pages: 3691 - 3702

    

23. ALEMI: A Ten-Year History of Discussions of Alloying-Element Interactions with Migrating Interfaces

    • Gary Purdy
    • John Ågren
    • Hatem Zurob

    Symposium: Austenite Formation and Decomposition IV 22 September 2011 Pages: 3703 - 3718

    

24. Kinetic Transition during Ferrite Growth in Fe-C-Mn Medium Carbon Steel

    • C. Capdevila
    • J. Cornide
    • E. Urones-Garrote

    Symposium: Austenite Formation and Decomposition IV 22 March 2011 Pages: 3719 - 3728

    

25. Effect of Composition and Deformation on Coarse-Grained Austenite Transformation in Nb-Mo Microalloyed Steels

    • N. Isasti
    • D. Jorge-Badiola
    • P. Uranga

    Symposium: Austenite Formation and Decomposition IV 12 February 2011 Pages: 3729 - 3742

    

26. Effect of V Precipitation on Continuously Cooled Sulfur-Lean Vanadium-Alloyed Steels for Long Products Applications

    • C. Capdevila
    • C. García-Mateo
    • F. G. Caballero

    Symposium: Austenite Formation and Decomposition IV 17 May 2011 Pages: 3743 - 3751

    

27. Role of Chemical Driving Force in Martensitic Transformations of High-Purity Fe-Cr-Ni Alloys

    • P. Behjati
    • A. Najafizadeh

    OriginalPaper 14 July 2011 Pages: 3752 - 3760

    

28. Analysis of Microstructural Changes Induced by Linear Friction Welding in a Nickel-Base Superalloy

    • O.T. Ola
    • O.A. Ojo
    • M.C. Chaturvedi

    OriginalPaper 16 August 2011 Pages: 3761 - 3777

    

29. Notched Tensile and Impact Fracture of Ti-15-3 Laser Welds

    • Leu-Wen Tsay
    • Yan-Jie Wu
    • Chun Chen

    OriginalPaper 14 July 2011 Pages: 3778 - 3784

    

30. Crystal-Growth Transition and Homogenous Nucleation Undercooling of Bismuth

    • Zengyun Jian
    • Ji Chen
    • Wanqi Jie

    OriginalPaper 12 August 2011 Pages: 3785 - 3796

    

31. Nanoscale Cementite Precipitates and Comprehensive Strengthening Mechanism of Steel

    • Jie Fu
    • Guangqiang Li
    • Keming Fang

    OriginalPaper 09 August 2011 Pages: 3797 - 3812

    

32. Microstructural Characterization of the White Etching Layer in Nickel-Based Superalloy

    • A. M. Wusatowska-Sarnek
    • B. Dubiel
    • J. E. Klemberg-Sapieha

    OriginalPaper 16 August 2011 Pages: 3813 - 3825

    

33. Ductile and High Strength White Cast Iron of Ultrafine Interconnected Network Morphology

    • C. M. HO
    • H. W. KUI

    OriginalPaper 04 August 2011 Pages: 3826 - 3837

    

34. Growth and Characterization of GaN Nanowires by NiCl₂ Assisted Chemical Vapor Deposition

    • Xiaofeng Wei
    • Feng Shi

    OriginalPaper 21 July 2011 Pages: 3838 - 3843