1. Effect of vanadium addition on the microstructure, hardness, and wear resistance of Al_0.5CoCrCuFeNi high-entropy alloy

   • Min-Rui Chen
   • Su-Jien Lin
   • Yuan-Sheng Huang

   OriginalPaper Pages: 1363 - 1369

2. Crystal plasticity modeling of deformation and creep in polycrystalline Ti-6242

   • Dhyanjyoti Deka
   • Deepu S. Joseph
   • Michael J. Mills

   OriginalPaper Pages: 1371 - 1388

3. Investigation of oxidation characteristics and atomic partitioning in platinum and ruthenium bearing single-crystal Ni-based superalloys

   • S. Tin
   • L. Zhang
   • M. K. Miller

   OriginalPaper Pages: 1389 - 1396

4. Crystal structures and textures in the hot-forged Ni-Mn-Ga shape memory alloys

   • D. Y. Cong
   • Y. D. Wang
   • P. K. Liaw

   OriginalPaper Pages: 1397 - 1403

5. Effect of internal stress on autocatalytic nucleation of martensitic transformation

   • Q. P. Meng
   • Y. H. Rong
   • T. Y. Hsu (Xu Zuyao)

   OriginalPaper Pages: 1405 - 1411

6. Nanocrystallization and magnetic properties of Fe-30 weight percent Ni alloy by surface mechanical attrition treatment

   • Chunsheng Wen
   • Zi Chen
   • Yonghua Rong

   OriginalPaper Pages: 1413 - 1421

7. Influence of β grain size on tensile behavior and ductile fracture toughness of titanium alloy Ti-10V-2Fe-3Al

   • A. Bhattacharjee
   • V. K. Varma
   • S. Bhargava

   OriginalPaper Pages: 1423 - 1433

8. Contributions to the interfacial adhesion in co-sintered bilayers

   • Y. Boonyongmaneerat
   • C. A. Schuh

   OriginalPaper Pages: 1435 - 1442

9. Durability of Fe-Co thin films on Ti-6Al-4V

   • K. S. Chan
   • S. J. Hudak Jr.
   • A. Veit

   OriginalPaper Pages: 1443 - 1457

10. Rheological behavior of Al-Mg-Si-Cu alloys in the mushy state obtained by partial remelting and partial solidification at high cooling rate

    • D. Fabrègue
    • A. Deschamps
    • W. J. Poole

    OriginalPaper Pages: 1459 - 1467

11. Low cycle fatigue in rene 88DT at 650 °C: Crack nucleation mechanisms and modeling

    • Kip O. Findley
    • Ashok Saxena

    OriginalPaper Pages: 1469 - 1475

12. Finite element analysis of a shear punch test

    • R. K. Guduru
    • R. O. Scattergood
    • A. V. Nagasekhar

    OriginalPaper Pages: 1477 - 1483

13. Correlation of microstructure with hardness and wear resistance of surface composites fabricated by high-energy electron beam irradiation of Fe-based metamorphic powders

    • Kyuhong Lee
    • Duk-Hyun Nam
    • Choongnyun Paul Kim

    OriginalPaper Pages: 1485 - 1494

14. Microstructural changes during wear by plastic deformation of cemented carbide and cermet cutting inserts

    • Gustaf Östberg
    • Hans-Olof Andrén

    OriginalPaper Pages: 1495 - 1506

15. Observations on the faceted initiation site in the dwell-fatigue tested ti-6242 alloy: Crystallographic orientation and size effects

    • V. Sinha
    • M. J. Mills
    • J. E. Spowart

    OriginalPaper Pages: 1507 - 1518

16. Effect of normalization temperature on the creep strength of modified 9Cr-1Mo steel

    • T. C. Totemeier
    • H. Tian
    • J. A. Simpson

    OriginalPaper Pages: 1519 - 1525

17. High-strain-rate behavior of low-alloy multiphase aluminum- and silicon-based transformation-induced plasticity steels

    • J. Van Slycken
    • P. Verleysen
    • B. C. de Cooman

    OriginalPaper Pages: 1527 - 1539

18. Dissolution of chromium-enriched inclusions and pitting corrosion of resulfurized stainless steels

    • H. Krawiec
    • V. Vignal
    • E. Chauveau

    OriginalPaper Pages: 1541 - 1549

19. Dissolution and interface reactions between the 95.5Sn-3.9Ag-0.6Cu, 99.3Sn-0.7Cu, and 63Sn-37Pb solders on silver base metal

    • Paul T. Vianco
    • Robert D. Wright
    • Joseph J. Martin

    OriginalPaper Pages: 1551 - 1561

20. Failure characteristics during cyclic oxidation of yttria stabilized zirconia thermal barrier coatings deposited via electron beam physical vapor deposition on platinum aluminide and on NiCoCrAlY bond coats with processing modifications for improved performances

    • N. M. Yanar
    • F. S. Pettit
    • G. H. Meier

    OriginalPaper Pages: 1563 - 1580

21. Microstructural studies and micromagnetic analysis of nanocrystalline NdFeCoMB (M = Ga, Ge) melt-spun ribbon

    • R. Gholamipour
    • A. Beitollahi
    • K. Hono

    OriginalPaper Pages: 1581 - 1587

22. Quantification of microsegregation during rapid solidification of Al-Cu powders

    • Arvind Prasad
    • Hani Nenein
    • Kelly Conlon

    OriginalPaper Pages: 1589 - 1596

23. A new mechanism of hook formation during continuous casting of ultra-low-carbon steel slabs

    • Joydeep Sengupta
    • Brian G. Thomas
    • Seon-Hyo Kim

    OriginalPaper Pages: 1597 - 1611

24. A three-phase model for mixed columnar-equiaxed solidification

    • Menghuai Wu
    • Andreas Ludwig

    OriginalPaper Pages: 1613 - 1631

25. Large strain deformation field in machining

    • Seongeyl Lee
    • Jihong Hwang
    • W. Dale Compton

    OriginalPaper Pages: 1633 - 1643

26. Modelling the influences of solid-state interdiffusion and dissolution on transient liquid phase sintering kinetics in a binary isomorphous system

    • D. M. Turriff
    • S. F. Corbin

    OriginalPaper Pages: 1645 - 1655

27. Microstructural evolution of submicron sized ferrite in bimodal structural ultrafine grained ferrite/cementite steels by annealing below austenized temperature

    • Ming-Chun Zhao
    • Toshihiro Hanamura
    • Ke Yang

    OriginalPaper Pages: 1657 - 1664

28. Fabrication of iron aluminum alloy/steel laminate by clad rolling

    • N. Masahashi
    • S. Watanabe
    • G. Kimura

    OriginalPaper Pages: 1665 - 1673

29. Mathematical modeling of particle segregation during centrifugal casting of metal matrix composites

    • Emila Panda
    • S. P. Mehrotra
    • Dipak Mazumdar

    OriginalPaper Pages: 1675 - 1687

30. Atmosphere change of vacuum to hydrogen and sharpness of {110}〈001〉 texture in thin-gaged 3 Pct Si-Fe alloy strips

    • N. H. Heo
    • S. B. Kim

    Communications Pages: 1689 - 1691

31. Crystallization and characterization of substoichiometric compound (W_0.5Al_0.5)C_0.5 obtained by solid-state reaction

    • Junmin Yan
    • Huaguo Tang
    • Wei Zhao

    Communications Pages: 1692 - 1695