1. Case reviews on the effect of microstructure on the corrosion behavior of austenitic alloys for processing and storage of nuclear waste

   • V. Kain
   • P. Sengupta
   • S. Banerjee

   OriginalPaper Pages: 1075 - 1084

2. Ceramic coatings for a corrosion-resistant nuclear waste container evaluated in simulated ground water at 90 °C

   • Jeffery J. Haslam
   • Joseph C. Farmer
   • Keith R. Wilfinger

   OriginalPaper Pages: 1085 - 1095

3. Corrosion behavior of carbon steel rock bolt in simulated Yucca Mountain ground waters

   • A. Yilmaz
   • R. B. Rebak
   • D. Chandra

   OriginalPaper Pages: 1097 - 1105

4. Corrosion-creep interaction of stainless alloys in acid chloride solutions

   • K. S. Raja
   • S. A. Namjoshi
   • D. A. Jones

   OriginalPaper Pages: 1107 - 1120

5. Risk assessment of uniform and localized corrosion of alloy 22

   • A. Passarelli
   • T. Bloomer
   • O. Pensado

   OriginalPaper Pages: 1121 - 1127

6. General corrosion of alloy 22: Experimental determination of model parameters from electrochemical impedance spectroscopy data

   • L. Glen McMillion
   • D. A. Jones
   • Digby D. MacDonald

   OriginalPaper Pages: 1129 - 1141

7. Topologically close-packed phase precipitation and thermal stability in alloy 22

   • Y. -M. Pan
   • D. S. Dunn
   • G. A. Cragnolino

   OriginalPaper Pages: 1143 - 1151

8. Electrochemical methods to detect susceptibility of Ni-Cr-Mo-W alloy 22 to intergranular corrosion

   • D. D. Gorhe
   • K. S. Raja
   • D. A. Jones

   OriginalPaper Pages: 1153 - 1167

9. The effect of potential and aging on the Pb-assisted stress corrosion cracking susceptibility of alloy 22 gas tungsten arc-welded weldments

   • Aladar A. Csontos
   • Yi-Ming Pan
   • Gustavo A. Cragnolino

   OriginalPaper Pages: 1169 - 1177

10. Influence of halide ions and alloy microstructure on the passive and localized corrosion behavior of alloy 22

    • Martín A. Rodríguez
    • Ricardo M. Carranza
    • Raúl B. Rebak

    OriginalPaper Pages: 1179 - 1185

11. Stress-corrosion-crack initiation and growth-rate studies on titanium grade 7 and alloy 22 in concentrated groundwater

    • P. L. Andresen
    • G. M. Catlin
    • G. M. Gordon

    OriginalPaper Pages: 1187 - 1198

12. Three-dimensional analysis and classification of grain-boundary-nucleated proeutectoid ferrite precipitates

    • M. V. Kral
    • G. Spanos

    OriginalPaper Pages: 1199 - 1207

13. New insights into the widmanstätten proeutectoid ferrite transformation: Integration of crystallographic and three-dimensional morphological observations

    • G. Spanos
    • A. W. Wilson
    • M. V. Kral

    OriginalPaper Pages: 1209 - 1218

14. Theoretical and practical implications of creep curve shape analyses for 8090

    • H. Burt
    • B. Wilshire

    OriginalPaper Pages: 1219 - 1227

15. Effect of different mo contents on tensile and corrosion behaviors of CD4MCU cast duplex stainless steels

    • Younghwan Jang
    • Sangshik Kim
    • Jehyun Lee

    OriginalPaper Pages: 1229 - 1236

16. Microstructural modification in full penetration and partial penetration electron beam welds in INCONEL-718 (IN-718) and its effect on fatigue crack initiation

    • A. K. Abdul Jawwad
    • M. Strangwood
    • C. L. Davis

    OriginalPaper Pages: 1237 - 1247

17. Deformation mechanisms in superplastic AA5083 materials

    • Mary-Anne Kulas
    • W. Paul Green
    • Terry R. McNelley

    OriginalPaper Pages: 1249 - 1261

18. Mechanical performance of the Al _x CoCrCuFeNi high-entropy alloy system with multiprincipal elements

    • Chung-Jin Tong
    • Min-Rui Chen
    • Shou-Yi Chang

    OriginalPaper Pages: 1263 - 1271

19. Lead-free solder materials: Experimental enthalpies of mixing of liquid Ag-In-Pd-Sn alloys

    • Christoph Luef
    • Hans Flandoreer
    • Herbert Ipser

    OriginalPaper Pages: 1273 - 1277

20. Bonding mechanism in ultrasonic gold ball bonds on copper substrate

    • I. Lum
    • J. P. Jung
    • Y. Zhou

    OriginalPaper Pages: 1279 - 1286

21. Phase selection during directional solidification of peritectic alloys

    • T. A. Lograsso
    • B. C. Fuh
    • R. Trivedi

    OriginalPaper Pages: 1287 - 1300

22. Microstructure and properties of Ni₃Si alloyed with Cr fabricated by self-propagating high-temperature synthesis casting route

    • Qinling Bi
    • Peiquing La
    • Yutian Ding

    OriginalPaper Pages: 1301 - 1307

23. The microstructural evolution of near beta alloy Ti-10V-2Fe-3Al during subtransus forging

    • Martin Jackson
    • Richard Dashwood
    • Leo Christodoulou

    OriginalPaper Pages: 1317 - 1327

24. Through-thickness texture variation in cold-rolled AA 5182 aluminum alloy with an initial {001}〈110〉 texture

    • W. C. Liu
    • J. G. Morris

    OriginalPaper Pages: 1329 - 1338

25. Microstructural stability of fine-grained fully lamellar XD TiAl alloys by step aging

    • Hanliang Zhu
    • K. Maruyama
    • P. Au

    OriginalPaper Pages: 1339 - 1351

26. Influence of severe plastic deformations on secondary phase precipitation in a 6082 Al-Mg-Si alloy

    • M. Cabibbo
    • E. Evangelista
    • M. Vedani

    OriginalPaper Pages: 1353 - 1364

27. Comparison of compressive deformation of ultrafine-grained 5083 Al alloy at 77 and 298 K

    • Jun Hwan Park
    • Kyung-Tae Park
    • Won Jong Nam

    Communications Pages: 1365 - 1368

28. Effect of solidification cooling rate on the morphology and number per unit volume of primary Mg₂Si particles in a hypereutectic Al-Mg-Si alloy

    • M. F. Ourfali
    • I. Todd
    • H. Jones

    Communications Pages: 1368 - 1372

29. Prediction of the kinetics of static globularization of Ti-6Al-4V

    • S. L. Semiatin
    • N. Stefansson
    • R. D. Doherty

    Communications Pages: 1372 - 1376

30. Hardness of pulsed electric current sintered and hot isostatically pressed Mo(Si,Al)₂

    • Jun Tanabe

    Communications Pages: 1376 - 1380