1. Influence of magnetic field on the kinetics of proeutectoid ferrite transformation in iron alloys

   • M. Enomoto
   • H. Guo
   • M. Shimotomai

   OriginalPaper Pages: 445 - 453

2. Simulation of paraequilibrium growth in multicomponent systems

   • G. Ghosh
   • G. B. Olson

   OriginalPaper Pages: 455 - 467

3. The dependence of normal and abnormal grain growth in silver on annealing temperature and atmosphere

   • Jae Bon Koo
   • Duk Yong Yoon

   OriginalPaper Pages: 469 - 475

4. Deformation of NiTiCu shape memory single crystals in compression

   • Huseyin Sehitoglu
   • Ibrahim Karaman
   • Hans J. Maier

   OriginalPaper Pages: 477 - 489

5. Interdiffusion in the TiO₂ oxidation product of Ti₃Al

   • I. C. I. Okafor
   • X. Wen
   • R. G. Reddy Acipco

   OriginalPaper Pages: 491 - 495

6. Mixed-mode, high-cycle fatigue-crack-growth thresholds in Ti-6Al-4V: Role of bimodal and lamellar microstructures

   • J. P. Campbell
   • R. O. Ritchie

   OriginalPaper Pages: 497 - 503

7. Effects of heat treatment and alloying elements on the microstructures and mechanical properties of 0.15 wt pct C transformation-induced plasticity-aided cold-rolled steel sheets

   • Sung-Joon Kim
   • Chang Gjl Lee
   • Sunghak Lee

   OriginalPaper Pages: 505 - 514

8. Correlation of microstructure with the wear resistance and fracture toughness of duocast materials composed of high-chromium white cast iron and low-chromium steel

   • Hongsug Oh
   • Sunghak Lee
   • Sangho Ahn

   OriginalPaper Pages: 515 - 524

9. The effect of solution heat treatment and quenching rates on mechanical properties and microstructures in AlSiMg foundry alloys

   • L. Pedersen
   • L. Arnberg

   OriginalPaper Pages: 525 - 532

10. An investigation of the fracture behavior of coarse-grained heat-affected zones in A707 steel welds

    • W. O. Soboyejo
    • J. Zhou
    • F. Orth

    OriginalPaper Pages: 533 - 545

11. Microstructural evolution in the superplastic-like deformation of Al-Al₃Ni eutectic alloy with [111] fiber texture

    • J. Y. Uan
    • T. S. Lui
    • L. H. Chen

    OriginalPaper Pages: 547 - 555

12. Environment-sensitive fracture of iron aluminides under monotonic tensile loading

    • Gilbert Hénaff
    • Anne Tonneau

    OriginalPaper Pages: 557 - 567

13. Effect of CO₂ laser welding on the shape-memory and corrosion characteristics of TiNi alloys

    • Y. T. Hsu
    • Y. R. Wang
    • C. Chen

    OriginalPaper Pages: 569 - 576

14. Effects of annealing on the microstructure and giant magnetoresistance of Co-Cu-based spin valves

    • M. A. Mangan
    • G. Spanos
    • W. F. Egelhoff Jr.

    OriginalPaper Pages: 577 - 584

15. Continuously cast Cu-Al-Ni shape memory wires with a unidirectional morphology

    • G. Motoyasu
    • M. Kaneko
    • A. McLean

    OriginalPaper Pages: 585 - 593

16. Numerical modeling for peritectic solidification of RE123 high T _c oxide superconductors

    • Masaki Sumida
    • Takateru Umeda

    OriginalPaper Pages: 595 - 604

17. Role of solid-state skeletal sintering during processing of Mo-Cu composites

    • John L. Johnson
    • Randall M. German

    OriginalPaper Pages: 605 - 613

18. Morphological evolution during the early stages of aluminide coating growth on a single-crystal nickel superalloy surface

    • G. Y. Kim
    • W. Y. Lee
    • T. R. Watkins

    OriginalPaper Pages: 615 - 624

19. The influence of Al₃Zr dispersoids on the recrystallization of hot-deformed AA 7010 alloys

    • Bruce Morere
    • Ravi Shahani
    • Julian Driver

    OriginalPaper Pages: 625 - 632

20. Correlation of abrasive wear with microstructure and mechanical properties of pressure die-cast aluminum hard-particle composite

    • S. Das
    • D. P. Mondal
    • G. Dixit

    OriginalPaper Pages: 633 - 642

21. Modeling of structural and compositional homogenization of plutonium-1 weight percent gallium alloys

    • Jeremy N. Mitchell
    • Thomas G. Zocco
    • Frank E. Gibbs

    OriginalPaper Pages: 649 - 659

22. Modeling of kinetics of austenite-to-allotriomorphic ferrite transformation in 0.37C-1.45Mn-0.11V microalloyed steel

    • C. Capdevila
    • F. G. Caballero
    • C. García de Andrés

    OriginalPaper Pages: 661 - 669

23. Martensitic phase transformations in IMI 550 (Ti-4Al-4Mo-2Sn-0.5 Si)

    • K. K. Kharia
    • H. J. Rack

    OriginalPaper Pages: 671 - 679

24. Numerical modeling of multiphase diffusion in the process of homogenizing in binary alloys

    • S. Tsuji

    OriginalPaper Pages: 681 - 690

25. Lattice plane response during tensile loading of an aluminum 2 percent magnesium alloy

    • B. Clausen
    • M. A. M. Bourke

    OriginalPaper Pages: 691 - 694

26. The effect of twinning and slip on the bauschinger effect of hadfield steel single crystals

    • Ibrahim Karaman
    • Huseyin Sehitoglu
    • Hans J. Maier

    OriginalPaper Pages: 695 - 706

27. An evaluation of the flow behavior during high strain rate superplasticity in an Al-Mg-Sc alloy

    • Shogo Komura
    • Zenji Horita
    • Terence G. Langdon

    OriginalPaper Pages: 707 - 716

28. Plastic straining effects on the microstructure of a Ti-rich NiTi shape memory alloy

    • H. F. Lopez
    • A. Salinas
    • H. Calderón

    OriginalPaper Pages: 717 - 729

29. Fatigue-crack growth behavior in the superelastic and shape-memory alloy nitinol

    • A. L. McKelvey
    • R. O. Ritchie

    OriginalPaper Pages: 731 - 743

30. Microstructures of hot-rolled high-strength steels with significant differences in edge formability

    • R. D. K. Misra
    • S. W. Thompson
    • A. J. Boucek

    OriginalPaper Pages: 745 - 760

31. Nanoindentation as a strength probe—a study on the hardness dependence of indent size for fine-grained and coarse-grained ferritic steel

    • Kensuke Miyahara
    • Saburo Matsuoka
    • Tohru Hayashi

    OriginalPaper Pages: 761 - 768

32. Constitutive relationships for AlZnMg, AlZnMgCr, and AlZnMgZr alloys

    • Bjørn Rønning
    • Nils Ryum

    OriginalPaper Pages: 769 - 776

33. Texture, strain, and phase-fraction measurements during mechanical cycling in superelastic NiTi

    • R. Vaidyanathan
    • M. A. M. Bourke
    • D. C. Dunand

    OriginalPaper Pages: 777 - 786

34. Effect of Sb on the microstructure and mechanical properties of AZ91 magnesium alloy

    • Qudong Wang
    • Yanping Zhu
    • M. Mabuchi

    OriginalPaper Pages: 787 - 794

35. Creep crack growth in the absence of grain boundary precipitates in UDIMET 520

    • S. Xu
    • A. K. Koul
    • J. I. Dickson

    OriginalPaper Pages: 795 - 804

36. Effects of Si and Ni powder refining on the formation mechanism of nickel silicides induced by mechanical alloying

    • W. H. Lee
    • C. S. Byun
    • D. K. Kim

    OriginalPaper Pages: 805 - 810

37. Electrosintering of iron powder compacts

    • Yusef Fahmy
    • Hans Conrad

    OriginalPaper Pages: 811 - 819

38. Mechanical milling of gas-atomized Al-Ni-Mm (Mm = misch metal) alloy powders

    • Soon-Jik Hong
    • Taek-Soo Kim
    • C. Suryanarayana

    OriginalPaper Pages: 821 - 829

39. Modeling of spray-formed plates using an X-Y moving substrate

    • Y.J Lin
    • E. J. Lavernia
    • W. Feng

    OriginalPaper Pages: 831 - 840

40. Hydrogen-induced internal-stress plasticity in titanium

    • David C. Dunand
    • Peter Zwigl

    Communications Pages: 841 - 843

41. Preparation of Ti-Al intermetallic compounds by spark plasma sintering

    • Bingchu Mei
    • Y. Miyamoto

    Communications Pages: 843 - 847