1. Dilatometry study of the sintering behavior of boron-alloyed Fe-1.5 pct Mo powder

   • A. Molinari
   • S. Gialanella
   • J. Kazior

   OriginalPaper Pages: 1497 - 1506

2. Hydrogen diffusion coefficients in the titanium alloys IMI 834, Ti 10-2-3, Ti 21 S, and alloy C

   • H. -J. Christ
   • M. Decker
   • S. Zeitler

   OriginalPaper Pages: 1507 - 1517

3. An interdiffusion study of a NiAl alloy using single-phase diffusion couples

   • Sungtae Kim
   • Y. Austin Chang

   OriginalPaper Pages: 1519 - 1524

4. On homogenization of a binary alloy after dissolution of planar and spherical precipitates

   • M. Sinder
   • J. Pelleg

   OriginalPaper Pages: 1525 - 1530

5. Near-threshold fatigue crack growth behavior of 2195 aluminum-lithium-alloy—prediction of crack propagation direction and influence of stress ratio

   • D. L. Chen
   • M. C. Chaturvedi

   OriginalPaper Pages: 1531 - 1541

6. Residual strains in HY100 polycrystals: Comparisons of experiments and simulations

   • Paul Dawson
   • Donald Boyce
   • Ronald Rogge

   OriginalPaper Pages: 1543 - 1555

7. Load sharing between austenite and ferrite in a duplex stainless steel during cyclic loading

   • Johan Johansson
   • Magnus Odén

   OriginalPaper Pages: 1557 - 1570

8. Role of foreign-object damage on thresholds for high-cycle fatigue in Ti-6Al-4V

   • J. O. Peters
   • B. L. Boyce
   • O. Roder

   OriginalPaper Pages: 1571 - 1583

9. Surface tension of molten silicon measured by the electromagnetic levitation method under microgravity

   • H. Fujii
   • T. Matsumoto
   • M. Kohno

   OriginalPaper Pages: 1585 - 1589

10. Brazing of zirconia with AgCuTi and SnAgTi active filler metals

    • T. H. Chuang
    • M. S. Yeh
    • Y. H. Chai

    OriginalPaper Pages: 1591 - 1597

11. Solidification characteristics of the Al-8.3Fe-0.8V-0.9Si alloy

    • K. L. Sahoo
    • C. S. Sivaramakrishnan
    • A. K. Chakrabarti

    OriginalPaper Pages: 1599 - 1610

12. Solidification parameters during the columnar-to-equiaxed transition in lead-tin alloys

    • A. E. Ares
    • C. E. Schvezov

    OriginalPaper Pages: 1611 - 1625

13. Determination of thermophysical properties and boundary conditions of direct chill-cast aluminum alloys using inverse methods

    • J. -M. Drezet
    • M. Rappaz
    • M. Gremaud

    OriginalPaper Pages: 1627 - 1634

14. Flow behavior of the billet surface layer in porthole die extrusion of aluminum

    • Young-Tae Kim
    • Keisuke Ikeda

    OriginalPaper Pages: 1635 - 1643

15. Improved densification of carbonyl iron compacts by the addition of fine alumina powders

    • Y. C. Lu
    • K. S. Hwang

    OriginalPaper Pages: 1645 - 1652

16. Through-thickness texture gradients in cold-rolled aluminum

    • O. V. Mishin
    • B. Bay
    • D. Jull Jensen

    OriginalPaper Pages: 1653 - 1662

17. Effect of particle size and volume fraction on hot extrusion reaction synthesis of SiC particle reinforced NiAl

    • K. Morsi
    • H. B. McShane
    • M. McLean

    OriginalPaper Pages: 1663 - 1670

18. δ/γ Interface bondary sliding as a mechanism for strain accommodation during hot deformation in a duplex stainless steel

    • A. Piñol-Juez
    • A. Iza-Mendia
    • I. Gutiérrez

    OriginalPaper Pages: 1671 - 1677

19. The 900 °C isothermal section of Ti-Ni-V alloys

    • Sinn-Wen Chen
    • Chun-Sheng Ho
    • Chih-Ming Chen

    Communications Pages: 1679 - 1682

20. A scheil-gulliver model with back-diffusion applied to the microsegregation of chromium in Fe-Cr-C alloys

    • Ernst Kozeschnik

    Communications Pages: 1682 - 1684

21. Formation of pegs during hightemperature oxidation of Fe₃Al containing yttrium

    • W. D. Cho
    • Insoo Kim

    Communications Pages: 1685 - 1687

22. On convection in mushy phase and its effect on macrosegregation

    • A. K. Singh

    Communications Pages: 1687 - 1692

23. Reaction synthesis, microstructure, and mechanical properties of in situ composite NiAl-Al₂O₃-TiC

    • D. T. Jiang
    • D. L. Lin
    • C. X. Shi

    Communications Pages: 1692 - 1695

24. Further discussion of “Particle engulfment and pushing by solidifying interfaces: Part II. microgravity experiments and theoretical analysis

    • G. Kaptay

    Communications Pages: 1695 - 1700

25. Authors’ reply

    • D. M. Stefanescu
    • A. Catalina
    • P. A. Curreri

    Communications Pages: 1700 - 1704