1. Aging of freshly formed Fe- based martensites at low temperatures

   • K. Ullakko
   • V. G. Gavriljuk
   • V. M. Nadutov

   OriginalPaper Pages: 889 - 909

2. Chemical composition and structural identification of eutectic carbide in 1 pct Mn ductile iron

   • M. Nili Ahmadabadi
   • E. Niyama
   • T. Ohide

   OriginalPaper Pages: 911 - 918

3. Efficient measurement of microstructural surface area using trisector

   • Arun M. Gokhale
   • William J. Drury

   OriginalPaper Pages: 919 - 928

4. Intragranular ferrite nucleation in medium-carbon vanadium steels

   • Fusao Ishikawa
   • Toshihiko Takahashi
   • Tatsurou Ochi

   OriginalPaper Pages: 929 - 936

5. Morphology development in hot-dip galvanneal coatings

   • C. E. Jordan
   • A. R. Marder

   Transformations 06 July 2007 Pages: 937 - 947

6. Gas trapping and release in polycrystalline nickel preimplanted with helium

   • E. Abramov
   • D. Eliezer

   OriginalPaper Pages: 949 - 959

7. Fracture of glass in tensile and bending tests

   • Orestes E. Alarcón
   • Ricardo E. medrano
   • Pcter P. Gillis

   OriginalPaper Pages: 961 - 968

8. Effect of microstructure (particulate size and volume fraction) and counterface material on the sliding wear resistance of particulate-reinforced aluminum matrix composites

   • A. T. Alpas
   • J. Zhang

   OriginalPaper Pages: 969 - 983

9. High-performance Ni₃Al synthesized from composite powders

   • Wen-Chih Chiou
   • Chen-Ti Hu

   OriginalPaper Pages: 985 - 992

10. Crack initiation at long radial hydrides in Zr-2.5nb pressure tube material at elevated temperatures

    • R. Choubey
    • M. P. Puls

    OriginalPaper Pages: 993 - 1004

11. Fatigue crack growth rates and fracture toughness of rapidly solidified Al-8.5 pct Fe-1.2 pct V-1.7 pct Si alloys

    • S. Hariprasad
    • S. M. L. Sastry
    • R. J. Lederich

    OriginalPaper Pages: 1005 - 1014

12. The effects of H on the mechanical behavior of austenitic stainless steels at room temperature

    • Q. Y. Long
    • C. G. Fan
    • Y. Y. Li

    OriginalPaper Pages: 1015 - 1023

13. Textural and microstructural gradient effects on the mechanical behavior of a tantalum plate

    • S. I. Wright
    • G. T. Gray
    • A. D. Rollett

    OriginalPaper Pages: 1025 - 1031

14. The effect of nb morphology on the cyclic oxidation resistance of MoSi₂/20 vol pct Nb composites

    • D. E. Alman
    • N. S. Stoloff

    OriginalPaper Pages: 1033 - 1040

15. Auger electron analysis of the initial oxidation of titanium aluminides based on Ti-48Al

    • Y. T. Peng
    • P. B. Aswath
    • A. R. Koymen

    OriginalPaper Pages: 1041 - 1050

16. Modeling of the formation of under-riser macrosegregation during solidification of binary alloys

    • Q. Z. Diao
    • H. L. Tsai

    OriginalPaper Pages: 1051 - 1062

17. Modeling microstructure development in gray cast irons

    • David D. Goettsch
    • Jonathan A. Dantzig

    OriginalPaper Pages: 1063 - 1079

18. Prediction of Columnar to Equiaxed Transition during Diffusion-Controlled Dendritic Alloy Solidification

    • C. Y. Wang
    • C. Beckermann

    OriginalPaper Pages: 1081 - 1093

19. Evaluation of homogeneous compression flow curves using square cross-sectioned specimens

    • K. K. Ray
    • K. V. S. J. Rao
    • A. Ghosh

    Communications Pages: 1095 - 1097

20. Solidification macrostructures and macrosegregation in aluminum alloys cooled from above

    • D. G. McCartney
    • S. M. Ahmady

    Communications Pages: 1097 - 1102

21. Calorimetric evaluation of nonequilibrium state in as-melt spun Al-1.72 and Al-3.12 At. Pct Cu Alloys and Al-6.74, Al-8.48, and Al-11.97 At. Pct Si alloys

    • Y. Zhang
    • T. Yamane
    • J. Takahashi

    Communications Pages: 1102 - 1104