1. Effects of phosphorus grain boundary segregation and hardness on the ductile-to-brittle transition for a 2.25Cr1Mo steel

   • Song Shenhua
   • Yuan Zexi
   • Weng Luqian

   OriginalPaper Pages: 1 - 6

2. Preparation and microstructural analysis of Ti₂AlC/TiAl(Nb) composite

   • Yue Yunlong
   • Wu Haitao
   • Zhang Lianmeng

   OriginalPaper Pages: 7 - 11

3. Effects of Mo composites on the corrosion behaviors of low alloy steel

   • Liang Chenghao
   • Guo Jianwei
   • Hu Xianqi

   OriginalPaper Pages: 12 - 16

4. Deformation and densification laws of powder cold forging

   • Yu Shihao
   • Hua Lin
   • Liu Yongjun

   OriginalPaper Pages: 17 - 21

5. Kinetic equation for internal oxidation of Cu-Al alloy spheres

   • Song Kexing
   • Gao Jianxin
   • Guo Xiuhua

   OriginalPaper Pages: 22 - 26

6. Electronic structures and bonding properties of Ti₂AlC and Ti₃AlC₂

   • Min Xinmin
   • Ren Yi

   OriginalPaper Pages: 27 - 30

7. Preparation of porous ceramisite for waste water treatment made from red mud

   • Xiao Bo
   • Wu Shenbiao
   • Yang Jiakuan

   OriginalPaper Pages: 31 - 34

8. Long-term performance of moderate heat Portland cement with double-expansive sources

   • Ye Qing
   • Chen Huxing
   • Lou Zonghan

   OriginalPaper Pages: 35 - 39

9. The effect of surface etching and dation on the permeability spectrum of nanocrystalline Fe_85-x Co _x Nb₇B₈ ribbon

   • Mao Xingyu
   • Gao Wenli
   • Du Youwei

   OriginalPaper Pages: 40 - 43

10. Observation and analysis of gypsum particleboard using SEM

    • Feng Qian
    • Deng Yuhe
    • Kim Sumin

    OriginalPaper Pages: 44 - 47

11. Self-propagating high-temperature reductive synthesis of TiB₂-Al₂O₃ composite powders

    • Yu Zhiqiang
    • Yang Zhenguo

    OriginalPaper Pages: 48 - 51

12. Effect of polypropylene fibers on the long-term tensile strength of concrete

    • Yao Wu
    • Zhong Wenhui

    OriginalPaper Pages: 52 - 55

13. Composition design for high C₃S cement clinker and its mineral formation

    • Hou Guihua
    • Shen Xiaodong
    • Xu Zhongzi

    OriginalPaper Pages: 56 - 60

14. Microstructure formation and degradation mechanism of cementitious plugging agent slurries

    • Yan Peiyu
    • Zhou Yongxiang
    • Qin Jian

    OriginalPaper Pages: 61 - 65

15. The transmission modes and losses of the poled nano-crystal and polymer composite PbTiO₃/PEK-c thin-film waveguides

    • Ren Quan
    • Yuk Tak Chow
    • Chu Pak Lim

    OriginalPaper Pages: 66 - 69

16. The design and properties of G.656 optical fiber waveguide design

    • Cheng Yu
    • Zhao XiuJian

    OriginalPaper Pages: 70 - 73

17. Sr microalloying for refining grain size of AZ91D Magnesium alloy

    • Pan Yichuan
    • Liu Xiangfa
    • Yang Hua

    OriginalPaper Pages: 74 - 76

18. Preparation and properties of IrO₂ thin films grown by pulsed laser deposition technique

    • Gong Yansheng
    • Wang Chuanbin
    • Zhang Lianmeng

    OriginalPaper Pages: 77 - 81

19. Experimental investigation on flexural performance of masonry walls reinforced with GFRP

    • Liu Jifu
    • Liu Ming
    • Song Yupu

    OriginalPaper Pages: 82 - 84

20. The synthesis and electrorheological properties of BaTiO₃-coated PMMA microspheres

    • Peng Suili
    • Wei Jianhong
    • Wen Weijia

    OriginalPaper Pages: 85 - 87

21. Effects of annealing temperature on the electrical conductivity and mechanical property of Cu-Te alloys

    • Zhu Dachuan
    • Huang Wen
    • Tu Mingjing

    OriginalPaper Pages: 88 - 90

22. Relationship between liquid phase content and the orientation of PMNT ceramics by TGG method

    • Cao Minghe
    • Li Dongliang
    • Liu Hanxing

    OriginalPaper Pages: 91 - 93

23. Synthesis of fullerene by pyrolysis of acetylene in thermal HF-Plasma

    • Zhu Yanjuan
    • Zhang Guofu
    • Zhang Haiyan

    OriginalPaper Pages: 94 - 97

24. Effect of β-TCP ceramic on the total protein of osteoblasts

    • Qi Zhitao
    • Dai Honglian
    • Li Shipu

    OriginalPaper Pages: 98 - 101

25. Fabrication and properties of multilayer chitosan membrane loaded with tinidazole

    • Hong Hua
    • Chi Ping
    • Liu Changsheng

    OriginalPaper Pages: 102 - 107

26. Influences of carboxyl methyl cellulose on performances of mortar

    • Wang Yuli
    • Zhou Mingkai
    • Yang Yuhui

    OriginalPaper Pages: 108 - 111

27. PEGylated PLGA nanoparticles as tumor ecrosis factor-α receptor blocking peptide carriers: Preparation, characterization and release in vitro

    • Liu Wei
    • Yang Anshu
    • Yang Xiangliang

    OriginalPaper Pages: 112 - 116

28. Soluble eggshell mebrane protein: Antibacterial property and biodegradability

    • Yi Feng
    • Yu Jian
    • Guo Zhaoxia

    OriginalPaper Pages: 117 - 119

29. Hydrothermal synthesis and characterization of a novel organic inorganic hybrid compound [Co(dien)₂] (dienH₃)(H₃O)₇[P₂Mo₅O₂₃]₂·14H₂O

    • Zhao Weifeng
    • Zhang Lianmeng
    • Jin Surong

    OriginalPaper Pages: 120 - 121

30. Preparation and microstrutures of BSTO/MgO ferroelectric materials for phase shift

    • Yang Chunxia
    • Zhou Hongqing
    • Wu Hongzhong

    OriginalPaper Pages: 122 - 125

31. Preparation and properties of a-Si:H thin films deposited on different substrates

    • Rao Rui

    OriginalPaper Pages: 126 - 128

32. Effect of thermal treatment and acid leaching process on pore characteristics of nanometer porous glass

    • Han Jianjun
    • Xu Feng
    • Zhao Xiujian

    OriginalPaper Pages: 129 - 131

33. Reducing the compaction segregation of hot mix asphalt

    • Liu Honghai
    • Yin Ran
    • Wu Shaopeng

    OriginalPaper Pages: 132 - 135

34. Low temperature coating of anatase thin films on silica glass fibers by liquid phase deposition

    • Li Shun
    • Liu Jiachen
    • Feng Tiecheng

    OriginalPaper Pages: 136 - 139

35. Electrodeposition and characterization of CuInSe₂ thin films for solar cells

    • Li Jianzhuang
    • Zhao Xiujian
    • Xia Donglin

    OriginalPaper Pages: 140 - 143

36. Preparation of bauxite ceramic microsphere

    • Cheng Xiaosu
    • Liu Pingan
    • Zeng Lingke

    OriginalPaper Pages: 144 - 147

37. Microwave irradiation treatment of wood flour and its application in PVC-wood flour composites

    • Hu Shengfei
    • Chen Wen
    • Li Huaxing

    OriginalPaper Pages: 148 - 152

38. Thermal behavior and rheological properties of PANI-DBSA/PAN blends

    • Pan Wei

    OriginalPaper Pages: 153 - 155

39. The Complex of crosslinked chitosan with 4′-formal benzo-15-crown-5 and palladium used as catalyst for asymmetric hydrogenation of α-phenylethanone

    • Yi Ying
    • Wang Yuting
    • Ma Shulan

    OriginalPaper Pages: 156 - 160

40. Formation and characterization of Pd, Pt and Pd-Pt alloy films on polyimide by catalyst-enhanced chemical vapor deposition

    • Zhou Jinlan
    • Cheng Yinhua
    • Yu Kaichao

    OriginalPaper Pages: 161 - 164

41. Influence of particle size on piezoelectricity of piezo-composites

    • Luo Dabing
    • Liu Hanxing
    • Ouyang Shixi

    OriginalPaper Pages: 165 - 167

42. Effects of heat treatment temperature and time on structure and static magnetic property of W-type ferrite hollow microspheres

    • Ren Ping
    • Guan Jianguo
    • Zhang Junxi

    OriginalPaper Pages: 168 - 170

43. Investigation of the thermal decomposition properties of polyoxymethylene

    • Hu Ping
    • Shang Ting
    • Chen Meng

    OriginalPaper Pages: 171 - 173

44. Preparation of hollow porous HAP microspheres as drug delivery vehicles

    • Wang Qing
    • Huang Wenhai
    • Wang Deping

    OriginalPaper Pages: 174 - 177