1. Fatigue life prediction of concrete under cyclic compression based on gradient boosting regression tree

   • Gui-Qin Liang
   • Xuan Chen
   • Chun-Song Jiang

   Original Article 30 October 2023 Article: 172

   

2. Effect of decarbonization of high carbon fly ash on workability, mechanical properties and durability of concrete

   • Yaguang Zhu
   • Hua Fu
   • YiZhi Gao

   Original Article 29 October 2023 Article: 171

   

3. Influence of initial moisture content on creep and shrinkage of concrete at constant and cyclic ambient humidity

   • Anna-Lena Podhajecky
   • Nadja Oneschkow
   • Michael Haist

   Original Article Open access 26 October 2023 Article: 170

   

4. Standardisation of low clinker cements containing calcined clay and limestone: a review by RILEM TC-282 CCL

   • Fragkoulis Kanavaris
   • Manuel Vieira
   • Kyle Riding

   RILEM TC 282-CCL: Calcined Clays as Supplementary Cementitious Materials 19 October 2023 Article: 169

5. Chemical and mechanical analysis of VAPro-aged asphalt binders from different crude oil sources

   • Daniel Maschauer
   • Daniel Steiner
   • Bernhard Hofko

   Original Article Open access 19 October 2023 Article: 168

   

6. Influences and mechanisms of mixing process on properties of the fresh and hardened Type II cement asphalt (CA) mortar

   • Yongjun Zhang
   • Guangpeng He
   • Deyu Kong

   Original Article 19 October 2023 Article: 167

   

7. Efficient approach to measuring strength and deformation of passively confined concrete

   • Petr Havlásek
   • Václav Nežerka
   • Zdeněk Bittnar

   Original Article 17 October 2023 Article: 166

   

8. A methodology for designing 3D printable mortar based on recycled sand

   • Raghed Al Thib
   • Naima Belayachi
   • Sébastien Rémond

   Original Article 17 October 2023 Article: 165

   

9. Recommendation of RILEM TC 256-SPF on the method of testing concrete spalling due to fire: material screening test

   • Pierre Pimienta
   • Robert McNamee
   • Frank Weise

   RILEM TC Recommendation 12 October 2023 Article: 164

   

10. Analysis of the bond behavior of a GFRP rebar in concrete by in-situ 3D imaging test

    • Szymon Grzesiak
    • Tin Barisin
    • Matthias Pahn

    Original Article Open access 11 October 2023 Article: 163

    

11. Monitoring corrosion-induced concrete cracking adjacent to the steel-concrete interface

    • Andreas Alhede
    • Jelke Dijkstra
    • Karin Lundgren

    Original Article Open access 11 October 2023 Article: 162

    

12. Effect of matrix self-healing on the bond-slip behavior of micro steel fibers in ultra-high-performance concrete

    • Salam Al-Obaidi
    • Shan He
    • Liberato Ferrara

    Original Article 11 October 2023 Article: 161

    

13. Deterioration mechanism of chloride attack on reinforced concrete under stray current and high hydraulic pressure coexistence environment

    • Yongqing Chen
    • Mingyue Chen
    • Xin Kang

    Original Article 11 October 2023 Article: 160

    

14. Evaluation of distributed fibre optic sensors in structural concrete

    • Till Janiak
    • Henrik Becks
    • Josef Hegger

    Original Article Open access 05 October 2023 Article: 159

    

15. Influence of C–S–Hs–PCE and Na₂SO₄ on the fluidity and mechanical performance of cement–lithium slag binder

    • Yan He
    • Guoqiang Zhang
    • Mingjing Jiang

    Original Article 04 October 2023 Article: 158