1. Influence of glass fibre grid and its placement on the fatigue damage of asphalt mixture

   • B. S. Abhijith
   • Arbin Raj
   • J. M. Krishnan

   Original Article 31 August 2023 Article: 140

   

2. Manufactured crushed sand: packing fraction prediction and influence on mortar rheology

   • M. Barry
   • M. Clément
   • A. Perrot

   Original Article 30 August 2023 Article: 139

   

3. Effect of curing regime on mechanical characteristics of cold recycled bituminous mixes

   • Arunkumar Goli
   • Deepa Sasidharan
   • Gottumukkala Bharath

   Original Article 27 August 2023 Article: 138

   

4. Flexural fatigue behavior of hooked-end steel fibres reinforced concrete using centrally loaded round panel test

   • Rendi Wu
   • Qian Gu
   • Xiang Wang

   Original Article 22 August 2023 Article: 137

   

5. Correction: RILEM TC 277-LHS report: How hot are hot-lime-mixed mortars? A review

   • S. Pavia
   • R. Veiga
   • A. Padovnik

   Correction Open access 22 August 2023 Article: 136

6. Upcycling of demolition material from concrete and brick for the production of cold-bound, alkali-activated lightweight aggregates

   • Isabelle Wichmann
   • Rafia Firdous
   • Dietmar Stephan

   Original Article Open access 22 August 2023 Article: 135

   

7. Extending fly ash and pumice usage through blending with inert basaltic fines

   • Ying Wang
   • Prannoy Suraneni

   Original Article 21 August 2023 Article: 134

   

8. Strength and air permeability of steam-cured expansive concrete: effects of chemical prestress, water-to-binder ratio, and curing condition

   • Adhitya Leonard Wijaya
   • Saeko Kajita
   • Kenichiro Nakarai

   Original Article 21 August 2023 Article: 133

   

9. Investigation of residual protection of a 55 years old marine structure after 20 years subject to impressed current cathodic protection

   • David Law
   • Shamir Bhuiyan
   • Bruce Ackland

   Original Article Open access 16 August 2023 Article: 132

   

10. Effects of sucrose on fresh-state and setting properties of air lime

    • Cecilia Pesce
    • Giovanni Pesce
    • Marco Corradi

    Original Article Open access 11 August 2023 Article: 131

    

11. Evaluation of cracking and cohesive fracture response in recycled aggregate concrete

    • Sourav Chakraborty
    • Kolluru V. L. Subramaniam

    Original Article 10 August 2023 Article: 130

    

12. Early metakaolin reactions in pozzolanic R³-test: calorimetry baseline correction of initial temperature jump due to ex-situ mixing

    • Kira Weise
    • Neven Ukrainczyk
    • Eduardus Koenders

    Original Article Open access 08 August 2023 Article: 129

    

13. An innovative connection proposal for the precast prestressed column-foundation connection

    • Mehmet Uzun
    • Mustafa Tolga Cogurcu
    • Mehmet Akif Arslan

    Original Article 07 August 2023 Article: 128

    

14. Effects of premixed Cl⁻ on performance of calcium sulphoaluminate cement: mechanism of anti-chloride penetration

    • Xin Wang
    • Xuelei Jiang
    • Feng Xing

    Original Article 07 August 2023 Article: 127

    

15. Article of RILEM TC 292-MCC: life cycle assessment (LCA) of non-metallic reinforcement for reinforcing concrete: manufacturing, durability, dismantling, recycling and reuse: a review

    • Benjamin Kromoser
    • Marco Butler
    • Marzia Traverso

    RILEM TC Report Open access 04 August 2023 Article: 126

    

16. Drying of gypsum plaster prisms: prevention of visible sodium sulfate efflorescence through calcium formate addition

    • Nicholas Fobbe
    • Friedlinde Goetz-Neunhoeffer
    • Daniel Jansen

    Original Article Open access 01 August 2023 Article: 125

    

17. Experimental study on axial compressive behavior of stone masonry with ultra-high performance mortar

    • Cong Li
    • Baochun Chen
    • Miaoxing Liao

    Original Article 29 July 2023 Article: 124

    

18. Dynamic enhancing effect of free water on the dynamic tensile properties of mortar

    • Xihong Zhang
    • Yu-Wen Chiu
    • Jian Cui

    Original Article Open access 27 July 2023 Article: 123

    

19. Moisture migration characterization of bitumen emulsion-based cold in-place recycling mixture over curing

    • Jiwang Jiang
    • Zili Zhao
    • Fujian Ni

    Original Article 27 July 2023 Article: 122

    

20. Recommendation of RILEM TC 281-CCC: Test method to determine the effect of uniaxial compression load and uniaxial tension load on concrete carbonation depth

    • Yan Yao
    • Ling Wang
    • Yu Huang

    RILEM TC 281-CCC - Carbonation of concrete with supplementary cementitious materials 26 July 2023 Article: 121

    

21. On guidelines for mix proportioning of concrete incorporating coal bottom ash as fine aggregate

    • Joonho Seo
    • Jeong Eun Kim
    • Hyeong-Ki Kim

    Original Article 25 July 2023 Article: 120

    

22. Influence of edge proximity on concrete breakout failure in post-installed RC columns foundation joints

    • Sara Cattaneo
    • Vinay Mahadik
    • Jan Hofmann

    Original Article Open access 22 July 2023 Article: 119

    

23. Experimental and numerical evaluation of the compressive and shear behavior of unstabilized rammed earth

    • Fernando Ávila
    • Mario Fagone
    • Giovanna Ranocchiai

    Original Article 19 July 2023 Article: 118

    

24. Engineering performance and activation mechanism of asphalt binder modified by microwave and diesel pre-processed waste crumb rubber

    • Mingyue Li
    • Ouming Xu
    • Qichang Wang

    Original Article 18 July 2023 Article: 117

    

25. Experimental characterization of the compatibility between bitumen and fillers from a perspective of bitumen components and filler characteristics

    • Jiaqiu Xu
    • Zepeng Fan
    • Pengfei Liu

    Original Article 18 July 2023 Article: 116