1. Restrained shrinkage cracking of recycled aggregate concrete

   • Seyedhamed Sadati
   • Kamal H. Khayat

   Original Article 27 July 2017 Article: 206

   

2. A short-term test method to determine the chloride threshold of steel–cementitious systems with corrosion inhibiting admixtures

   • Jayachandran Karuppanasamy
   • Radhakrishna G. Pillai

   Original Article 26 July 2017 Article: 205

   

3. Bonding strength test method assessment for Cross-Laminated Timber Derived Stressed-Skin Panels (CLT SSP)

   • Emilio Luengo
   • Eva Hermoso
   • Francisco Arriaga

   Original Article 22 July 2017 Article: 204

   

4. Internal curing of Class-F fly-ash concrete using high-volume roof-tile waste aggregate

   • Phuong Trinh Bui
   • Yuko Ogawa
   • Ryoichi Sato

   Original Article 21 July 2017 Article: 203

   

5. Analysis-oriented model for concrete and masonry confined with fiber reinforced mortar

   • Alessio Cascardi
   • Maria Antonietta Aiello
   • Thanasis Triantafillou

   Original Article 19 July 2017 Article: 202

   

6. Durability of steel FRCM-masonry joints: effect of water and salt crystallization

   • Elisa Franzoni
   • Cristina Gentilini
   • Christian Carloni

   Original Article 18 July 2017 Article: 201

   

7. Empirical modelling of CO₂ uptake by recycled concrete aggregates under accelerated carbonation conditions

   • Xiaoliang Fang
   • Dongxing Xuan
   • Chi Sun Poon

   Original Article 04 July 2017 Article: 200

   

8. Performance of mortars containing recycled fine aggregate from construction and demolition waste

   • Amnon Katz
   • Daniele Kulisch

   Original Article 03 July 2017 Article: 199

   

9. Experimental and analytical study on grouted duct connections in precast concrete construction

   • M. Elsayed
   • M. L. Nehdi

   Original Article 29 June 2017 Article: 198

   

10. A review of characterisation methods for superabsorbent polymer (SAP) samples to be used in cement-based construction materials: report of the RILEM TC 260-RSC

    • Christof Schröfl
    • Didier Snoeck
    • Viktor Mechtcherine

    Original Article 28 June 2017 Article: 197

    

11. Experimental study on asphalt mixture recovery

    • Ivan Isailović
    • Michael P. Wistuba
    • Augusto Cannone Falchetto

    Original Article 23 June 2017 Article: 196

    

12. Influence of corrosion rate on the mechanical interaction of reinforcing steel, oxide and concrete

    • B. Sanz
    • J. Planas
    • J. M. Sancho

    Original Article 22 June 2017 Article: 195

    

13. Effects of waste glass on alkali-activated tungsten mining waste: composition and mechanical properties

    • Gediminas Kastiukas
    • Xiangming Zhou

    Original Article Open access 22 June 2017 Article: 194

    

14. Procedure to determine the impact of the surface film resistance on the hygric properties of composite clay/fibre plasters

    • Fionn McGregor
    • Antonin Fabbri
    • Jean-Claude Morel

    Original Article 16 June 2017 Article: 193

    

15. Heated slabs under biaxial compressive loading: a test set-up for the assessment of concrete sensitivity to spalling

    • Francesco Lo Monte
    • Roberto Felicetti

    Original Article 15 June 2017 Article: 192

    

16. Effectiveness of crystalline admixtures and lime/cement coated granules in engineered self-healing capacity of lime mortars

    • C. De Nardi
    • S. Bullo
    • A. Vavasori

    Original Article 15 June 2017 Article: 191

    

17. Flexural behavior of stratified reinforced concrete: construction, testing, analysis, and design

    • Ivan Navarrete
    • Matias A. Hube
    • Mauricio Lopez

    Original Article 15 June 2017 Article: 190