1. The oxidation of bitumen witnessed in-situ by infrared spectroscopy

   • Michalina Makowska
   • Ari Hartikainen
   • Terhi Pellinen

   Original Article Open access 13 June 2017 Article: 189

   

2. Preparation, characterization and reaction kinetics of green cement: Ecuadorian natural mordenite-based geopolymers

   • Haci Baykara
   • Mauricio H. Cornejo
   • Jan Elsen

   Original Article 12 June 2017 Article: 188

   

3. Repeatability and sensitivity of FTIR ATR spectral analysis methods for bituminous binders

   • Bernhard Hofko
   • Mohammad Zia Alavi
   • John Harvey

   Original Article Open access 10 June 2017 Article: 187

   

4. An improved electrokinetic method to consolidate porous materials

   • Jorge Feijoo
   • L. M. Ottosen
   • Iván de Rosario

   Original Article 10 June 2017 Article: 186

   

5. Influence of emulsifier content on cement hydration and mechanical performance of bitumen emulsion mortar

   • Miomir Miljković
   • Martin Radenberg
   • Pietro Lura

   Original Article 09 June 2017 Article: 185

   

6. Reliability-based code calibration applied to thin elements made of UHPFRC

   • Svatopluk Dobruský

   OriginalPaper 20 May 2017 Article: 184

   

7. Prediction of the size effect in concrete structures using an analytical approach to the weakest link and localization method (WL2)

   • Maria Ghannoum
   • Julien Baroth
   • Alain Millard

   Original Article 18 May 2017 Article: 183

   

8. Identification of hydration stage of calcium sulfoaluminate cement at an early age with helium pycnometry

   • Xu Yang
   • Zhenping Sun
   • Max J. Setzer

   Original Article 17 May 2017 Article: 182

   

9. Hygromorphic response dynamics of oak: towards accelerated material characterization

   • T. Arends
   • L. Pel
   • H. P. Huinink

   Original Article Open access 15 May 2017 Article: 181

   

10. Experimental and theoretical evaluation of TCC connections with inclined self-tapping screws

    • Luca Marchi
    • Roberto Scotta
    • Luca Pozza

    Original Article 15 May 2017 Article: 180

    

11. Calibrated quantitative thermogravimetric analysis for the determination of portlandite and calcite content in hydrated cementitious systems

    • Y. A. Villagrán-Zaccardi
    • H. Egüez-Alava
    • N. De Belie

    Original Article 12 May 2017 Article: 179

    

12. Composition design and performance of alkali-activated cements

    • Ning Li
    • Caijun Shi
    • Zhihua Ou

    Original Article 11 May 2017 Article: 178

    

13. Complementarity of in situ and laboratory-based concrete permeability measurements

    • S. Starck
    • H. Beushausen
    • R. Torrent

    Original Article 10 May 2017 Article: 177

    

14. The advantages of using impact resonance test in dynamic modulus master curve construction through the abbreviated test protocol

    • Ilker Boz
    • Pezhouhan Tavassoti-Kheiry
    • Mansour Solaimanian

    Original Article 06 May 2017 Article: 176

    

15. Effect of accelerated carbonation conditions on the characterization of load-induced damage in reinforced concrete members

    • Rita Maria Ghantous
    • Stéphane Poyet
    • Raoul François

    Original Article 05 May 2017 Article: 175

    

16. Experimental tests of RC beams strengthened with composite materials using IPN water-based resins

    • Pier Paolo Diotallevi
    • Luca Landi
    • Marco Guiduzzi

    Original Article 29 April 2017 Article: 174

    

17. Low-temperature curing strength enhancement in cement-based materials containing limestone powder

    • Dale P. Bentz
    • Paul E. Stutzman
    • Franco Zunino

    Original Article 28 April 2017 Article: 173

    

18. Use of image correlation system to study the bond behavior of FRCM-concrete joints

    • C. Sabau
    • J. H. Gonzalez-Libreros
    • B. Täljsten

    Original Article 22 April 2017 Article: 172

    

19. Evaluation of the combined deterioration by freeze–thaw and carbonation of mortar incorporating BFS, limestone powder and calcium sulfate

    • Wenyan Zhang
    • Seunghyun Na
    • Yukio Hama

    Original Article 22 April 2017 Article: 171

    

20. Bond between steel reinforcement bars and Electric Arc Furnace slag concrete

    • Flora Faleschini
    • Amaia Santamaria
    • Carlo Pellegrino

    Original Article 21 April 2017 Article: 170

    

21. Influence of fibre count on variability in post-crack performance of fibre reinforced concrete

    • E. S. Bernard
    • G. G. Xu

    Original Article 20 April 2017 Article: 169

    

22. Long-term properties of concrete containing limestone powder

    • Qiang Wang
    • Jun Yang
    • Honghui Chen

    Original Article 19 April 2017 Article: 168

    

23. Recommendation of the RILEM TC 236-BBM: characterisation testing of hemp shiv to determine the initial water content, water absorption, dry density, particle size distribution and thermal conductivity

    • Sofiane Amziane
    • Florence Collet
    • Mohammed Sonebi

    RILEM Technical Committee 18 April 2017 Article: 167