On image analysis in fractography (Methodological Notes) M. A. Shtremel’ Physical Foundations of Strength and Plasticity 24 February 2016 Pages: 771 - 777
Irreversible deformation and the superplasticity of a TN-1 alloy during thermal cycling through the martensitic transformations ranges under loading I. N. AndronovYu. I. RyabkovI. V. Churilina Physical Foundations of Strength and Plasticity 24 February 2016 Pages: 778 - 784
Influence of high-pressure torsion on the structure of an FeCoSiBNb alloy with an aperiodic phase in the initial state I. V. LyasotskiiN. B. D’yakonovaR. V. Sundeev Physical Foundations of Strength and Plasticity 24 February 2016 Pages: 785 - 789
Mechanical properties of a metallic composite material based on an aluminum alloy reinforced by dispersed silicon carbide particles V. V. BerezovskiiYu. O. SolyaevYu. A. Kurganova Deformation and Fracture Mechanics 24 February 2016 Pages: 790 - 794
Phase composition and residual stresses in thermal barrier coatings S. Ya. BetsofenB. V. RyabenkoD. E. Molostov Promising Materials and Technologies 24 February 2016 Pages: 795 - 799
Glass ceramic and polymer impact-resistant materials and protective constructions based on them (Review) M. S. ArzhakovA. E. ZhirnovV. T. Zabolotnyi Promising Materials and Technologies 24 February 2016 Pages: 800 - 804
Influence of deformation and annealing conditions on the recrystallization cube texture in the three-layer NiW/NiCr/NiW substrate tapes D. P. RodionovYu. V. KhlebnikovaV. A. Kazantsev Promising Materials and Technologies 24 February 2016 Pages: 805 - 810
Fracture toughness of Ti–Al3Ti–Al–Al3Ti laminate composites under static and cyclic loading conditions A. M. PatselovS. V. GladkovskiiI. S. Kamantsev Promising Materials and Technologies 24 February 2016 Pages: 811 - 815
Interface after explosion welding: Fractal analysis B. A. GreenbergM. A. IvanovA. V. Inozemtsev Structure and Properties of the Deformed State 24 February 2016 Pages: 816 - 825
Physical simulation study of the dynamic recrystallization kinetics of an Ni–Cu–Al alloy A. I. RudskoiG. E. KodzhaspirovE. I. Kamelin Structure and Properties of the Deformed State 24 February 2016 Pages: 826 - 829
Texture and anisotropy of the mechanical properties of MA14 and MA2-1 alloys produced by granular metallurgy S. Ya. BetsofenV. Yu. KonkevichI. A. Grushin Structure and Properties of the Deformed State 24 February 2016 Pages: 830 - 835
Deformability of niobium and tin bronze during compression S. A. NikulinA. B. RozhnovN. V. Traktirnikova Applied Problems of Strength and Plasticity 24 February 2016 Pages: 836 - 839
Influence of the tensile strain rate on the mechanical properties and phase composition of VNS 9-Sh TRIP steel V. F. Terent’evA. K. SlizovM. A. Gol’dberg Applied Problems of Strength and Plasticity 24 February 2016 Pages: 840 - 843
Analysis of the causes of fracture of turbine blades in a gas-compressor unit V. G. RybalkoD. V. Novgorodov Applied Problems of Strength and Plasticity 24 February 2016 Pages: 844 - 850
On the impact bending test technique for high-strength pipe steels A. M. ArsenkinP. D. OdesskiiM. V. Likhachev Diagnostics and Mechanical Test Techniques 24 February 2016 Pages: 851 - 860