1. Formation of Slag Melt Technogenic Gold-Bearing Materials and Application of Refinement Tailings in the Construction Industry

   • S. Ya. Davydov
   • A. M. Amdur
   • S. A. Fedorov

   RAW MATERIALS 01 December 2022 Pages: 117 - 121

   

2. Production of Corundum Boats and Crucibles Used for Metal Melting and Material Analysis by the Casting Method

   • Y. K. Nepochatov
   • P. M. Pletnev
   • D. S. Tyulkin

   PRODUCTION AND EQUIPMENT 01 December 2022 Pages: 122 - 125

   

3. Certain Properties of Entropy in Critical Regimes of Two-Phase Flows

   • E. Barsky

   SCIENTIFIC RESEARCH AND DEVELOPMENT 02 December 2022 Pages: 126 - 129

   

4. Research in the Area of Preparing Activated Alumina. Part 1. Methods for Preparing Reactive Alumina

   • M. A. Trubitsyn
   • N. A. Volovicheva
   • R. V. Zubashchenko

   OriginalPaper 02 December 2022 Pages: 130 - 136

   

5. Research in the Area of Preparing Activated Alumina. Part 2. Efficiency of Preparing Finely Dispersed Aluminum Oxide Powder Using a Ball Mill

   • M. A. Trubitsyn
   • N. A. Volovicheva
   • R. V. Zubashchenko

   OriginalPaper 01 December 2022 Pages: 137 - 142

   

6. Aluminothermic Synthesis of Corundum from Natural Topaz

   • A. M. Klyushnikov
   • R. I. Gulyaeva
   • S. N. Tyushnyakov

   OriginalPaper 03 December 2022 Pages: 143 - 149

   

7. Silica Material as a Support for a Catalyst with a Fixed Nanostructured Active Component

   • V. I. Vanchurin
   • A. V. Belyakov
   • A. Yu. Petrov

   OriginalPaper 01 December 2022 Pages: 150 - 155

   

8. Phase Transformations in the Diatomite-Orthophosphoric Acid System on Heating at 800 – 1400°C

   • I. D. Kashcheev
   • A. E. Glyzina
   • V. M. Ust’yantsev

   OriginalPaper 01 December 2022 Pages: 156 - 158

   

9. Evaluation of the Effect of Alumina-Based Ceramic Fiber Texture on Strength

   • V. G. Babashov
   • V. G. Maksimov
   • N. M. Varrik

   OriginalPaper 01 December 2022 Pages: 159 - 162

   

10. Strength and Thermophysical Properties of Dense and Porous Materials Based on Silicon Nitride

    • S. N. Perevislov
    • I. E. Arlashkin
    • O. Yu. Shcherbakova

    OriginalPaper 01 December 2022 Pages: 163 - 168

    

11. Use of Burnt Sludge as Chamotte and its Influence on the Phase Composition of Acid-Resistant Materials

    • V. Z. Abdrakhimov
    • E. S. Abdrakhimova

    OriginalPaper 01 December 2022 Pages: 169 - 173

    

12. Abrasive Wear Mechanism of Polymer Composites with a Dispersed Filler

    • A. M. Mikhalchenkov
    • I. N. Kravchenko
    • M. N. Erofeev

    OriginalPaper 01 December 2022 Pages: 174 - 177

    

13. Significance of AlN and TiN Coatings for Controlled Transformation of Stress State of Si₃N₄–TiC Ceramics Surface Layer Under Force Loading Conditions

    • V. V. Kuzin
    • S. N. Grigor’ev
    • M. Yu. Fedorov

    OriginalPaper 01 December 2022 Pages: 178 - 184

    

14. Effect of AlN and TiN Coatings on Thermal and Stress State of Si₃N₄–TiC Ceramics Surface Layer Under Heat Flow Conditions

    • V. V. Kuzin
    • S. N. Grigor’ev
    • M. A. Volosova

    OriginalPaper 02 December 2022 Pages: 185 - 191

    

15. Effects of Technological Parameters During Impregnation on the Properties of Modified Quartz Ceramics

    • E. V. Mironova
    • D. V. Kharitonov
    • E. B. Korendovich

    OriginalPaper 01 December 2022 Pages: 192 - 196

    

16. Silicon Nitride Ceramics with Sintering Oxide Additives Obtained from Organoyttriumoxanealumoxane

    • A. V. Kirillov
    • E. A. Bogachev

    OriginalPaper 01 December 2022 Pages: 197 - 202

    

17. Production of Mineral Binders Based on Ferroalloy Slags

    • E. E. Khabibulin
    • B. B. Khaydarov
    • D. V. Kuznetsov

    OriginalPaper 03 December 2022 Pages: 203 - 208

    

18. Physico-Mechanical Properties and Structual Features of an Al–α–Al₂O₃ Cermet Obtained Using Corundum Microspheres by Sintering in Vacuum

    • D. A. Ivanov
    • D. A. Tarasov
    • L. V. Fedorova

    OriginalPaper 01 December 2022 Pages: 209 - 214

    

19. Physical and Mechanical Properties of Ti₃SiC₂-Based Materials

    • S. N. Perevislov
    • I. E. Arlashkin
    • A. S. Lysenkov

    OriginalPaper 01 December 2022 Pages: 215 - 219

    

20. Influence of Climatic Factors on the Properties and Characteristics of Carbon Fibre Reinforced Plastics

    • A. L. Galinovskii
    • I. N. Kravchenko
    • Z. Jia

    OriginalPaper 03 December 2022 Pages: 220 - 225

21. Investigation of Calcined Magnesite Sintering

    • K. V. Fayruzov
    • I. D. Kashcheev
    • E. F. Chaika

    OriginalPaper 01 December 2022 Pages: 226 - 229

    

22. Influence of Composition and Morphology of Magnesia Powders on Sintering of Compacts

    • V. G. Babashov
    • V. G. Maksimov
    • V. V. Butakov

    OriginalPaper 01 December 2022 Pages: 230 - 234

    

23. Simulation of Flow Separation at the Entrance to Round Exhaust Hoods with a Protrusion

    • O. A. Averkova
    • K. I. Logachev
    • E. N. Popov

    ECOLOGY 02 December 2022 Pages: 235 - 240