1. Formation of copper deposits under electrolysis with surface-active agents

   • I. B. Murashova
   • N. E. Agarova
   • L. M. Yakovleva

   Theory, Manufacturing Technology, and Properties of Powders and Fibers 11 June 2010 Pages: 1 - 7

2. Modeling the effective elastic properties of materials pressed from a unidirectional hexagonal fiber strand

   • V. G. Borovik

   Theory and Technology of Forming Process 11 June 2010 Pages: 8 - 16

3. Sintering stability of biporous materials under kinematic constraints

   • M. B. Shtern
   • A. V. Kuz’mov
   • E. Olevskii

   Theory and Technology of Sintering, Thermal and Chemicothermal Treatment 11 June 2010 Pages: 17 - 23

4. Direct multiscale modeling of diffusion sintering of ceramic composites

   • A. L. Maksimenko

   OriginalPaper 11 June 2010 Pages: 24 - 30

5. Effects of microwave heating in nanostructured ceramic materials

   • Yu. V. Bykov
   • S. V. Egorov
   • A. A. Sorokin

   OriginalPaper 11 June 2010 Pages: 31 - 41

6. Sintering of self-reinforced ceramics in the ZrO₂–Y₂O₃–CeO₂–Al₂O₃ system

   • A. V. Shevchenko
   • E. V. Dudnik
   • L. M. Lopato

   OriginalPaper 11 June 2010 Pages: 42 - 49

7. Thermal stability of nanosized composite C–Cu films

   • A. A. Onoprienko
   • N. I. Danilenko

   Nanostructured Materials 11 June 2010 Pages: 50 - 54

8. Spark-deposited coatings on magnesium alloys

   • I. A. Podchernyaeva
   • A. D. Panasyuk
   • V. N. Talash

   Sintered Metals and Alloys 11 June 2010 Pages: 55 - 60

9. Abrasive wear resistance of detonation coatings from mechanochemically alloyed Ti–Al–B powders

   • V. E. Oliker
   • V. L. Sirovatka
   • T. Ya. Gridasova

   OriginalPaper 11 June 2010 Pages: 61 - 65

10. Structurization of (AlN–TiN)–(Ni–Cr)–(TiN–Cr₃C₂) composite ceramics under concentrated solar radiation

    • V. G. Kayuk
    • O. N. Grigor’ev
    • T. V. Mosina

    Refractory and Ceramic Materials 11 June 2010 Pages: 66 - 70

11. The Al₂O₃–HfO₂–Y₂O₃ phase diagram. III. Solidus surface and phase equilibria in crystallization of alloys

    • S. M. Lakiza
    • Ya. S. Tishchenko
    • L. M. Lopato

    Physicochemical Materials Research 11 June 2010 Pages: 71 - 78

12. The Al–Cu–Ir isothermal section at 800°C in the aluminum-rich range

    • D. O. Kapush
    • B. Grushko
    • T. Ya. Velikanova

    OriginalPaper 11 June 2010 Pages: 79 - 85

13. Manganese-like metastable phases in the Fe–Mo system: experimental study and thermodynamic modeling. I. Crystalline state of Fe–Mo melt-spinning alloys

    • T. A. Velikanova
    • M. V. Karpets
    • M. A. Turchanin

    OriginalPaper 11 June 2010 Pages: 86 - 93

14. Interaction of Ti–6 wt.% Si alloy with tissue fluid: experimental modeling

    • V. A. Lavrenko
    • V. N. Talash
    • M. A. Krasovskii

    OriginalPaper 11 June 2010 Pages: 94 - 98

15. Microstructure and conductivity of hot-pressed Si₃N₄–TiO₂ (TiH₂) composites cooled at different rates

    • I. V. Chernyakova
    • S. N. Zdolnik
    • V. Ya. Petrovskii

    Structural Materials Research 11 June 2010 Pages: 99 - 109

16. Confinement and aspiration of dust and gas in the production of atomized copper powders

    • O. D. Neikov
    • G. I. Vasil’eva
    • V. G. Tokhtuev

    Powder Metallurgy Industry and Managerial Economics 11 June 2010 Pages: 110 - 115

17. Effect of warm pressing on the mechanical properties and structure of green compacts of heterogeneous copper-based powder

    • T. A. Epifantseva
    • V. G. Kayuk
    • O. V. Mikhailov

    Exchange of Experience 11 June 2010 Pages: 116 - 123