1. Calculation of equilibrium for artificial atmospheres of natural gas with steel Kh18N10

   • L. V. Bobukh
   • V. A. Tarasenko

   Chemicothermal Treatment Pages: 181 - 186

2. Carbonitriding of oxidized surfaces

   • L. S. Ol'khovoi
   • I. K. Yudin
   • G. V. Danileveskii

   Chemicothermal Treatment Pages: 187 - 190

3. Boriding tools in electrode baths

   • E. A. Smol'nikov
   • L. M. Sarmanova

   Chemicothermal Treatment Pages: 190 - 193

4. State and prospects for using diffusion layers with high wear resistance

   • I. Burakovski
   • Ya. Senatorski
   • Ya. Tatsikovski

   Chemicothermal Treatment Pages: 193 - 196

5. Reasons for the increase in the effectiveness of strengthening by surface plastic deformation with an increase in part cross section

   • N. A. Shokov
   • N. M. Savvina

   Strength Properties Pages: 197 - 201

6. Programmed strengthening of 12Kh18N1OT steel in biaxial loading

   • R. I. Garber
   • V. M. Dolinskii
   • V. N. Stognii

   Strength Properties Pages: 201 - 203

7. Structure of high-speed steel with high solidification rates

   • A. D. Ozerskii
   • H. Fishmaister
   • G. A. Panova

   Powder Metallurgy Materials Pages: 204 - 209

8. Influence of carbon on the phase composition, structure, and properties of type R6M5 powder metallurgy high-speed steel

   • S. A. Gorchakova

   Powder Metallurgy Materials Pages: 210 - 212

9. Properties of 10R6M5-MP steel produced by rolling

   • M. N. Goryushina
   • V. M. Panovko
   • V. S. Yusupov

   Powder Metallurgy Materials Pages: 212 - 214

10. Processes of interaction on the interface of a bimetal billet produced by the method of rolling unsintered powder

    • V. D. Kal'ner
    • M. N. Goryushina
    • L. A. Sychuzhnikova

    Powder Metallurgy Materials Pages: 214 - 217

11. Sintered, iron-based material with improved machinability

    • T. A. Pumpyanskaya
    • E. M. Fainshmidt
    • V. N. Kudryashov

    Powder Metallurgy Materials Pages: 217 - 220

12. Structure and properties of materials ZhGr0.8 and ZhGr0.8Kh depending on sintering time and heat treatment

    • S. I. Bogodukhov
    • S. S. Kiparisov
    • V. I. Rudakov

    Powder Metallurgy Materials Pages: 221 - 224

13. Computing the net cost of heat treatment for forgings

    • V. A. Bychko
    • L. N. Petrov
    • L. D. Shakova

    Technical Information Pages: 225 - 232

14. Effect of silicon and titanium on the mechanical properties of steel N18K9M5T

    • V. A. Kharitonov
    • N. I. Popova
    • V. F. Shishov

    Technical Information Pages: 232 - 234

15. Relative wear-resistance of single-phase and two-phase boride layers

    • E. V. Shadrichev
    • A. E. Ivanov

    Technical Information Pages: 235 - 239

16. Effect of shape memory in alloys based on the system Cu−Al

    • P. V. Titov

    Technical Information Pages: 239 - 243

17. Structural-phase condition and properties of high-strength alloy VAL8

    • N. S. Postnikov
    • A. S. Shpigel'
    • L. I. Laktionova

    Technical Information Pages: 243 - 246

18. Mechanism of the influence of titanium on the embrittlement tendency of martensite-aging steels in delayed deformation

    • V. M. Kardonskii
    • N. B. Gorbunova

    Technical Information Pages: 247 - 249

19. Slatiness in oxygen-free copper rods

    • V. G. Osintsev
    • E. I. Krupnikova-Perlina
    • L. I. Sotnikova

    Technical Information Pages: 250 - 252