1. Metallurgist Volume 63, Number 3

   Announcement 29 July 2019 Pages: 221 - 222

2. Heat Losses in the Cooling System and Consumption of Coke to Compensate for Them in Blast Furnaces of Various Volumes

   • A. L. Chaika
   • V. V. Lebed’
   • A. A. Sokhatskii

   OriginalPaper 13 July 2019 Pages: 223 - 227

   

3. Plasma Heating of Periclase-Carbonaceous Refractory for Lining of Steel Ladles

   • Ya. L. Kats
   • M. V. Krasnyanskii
   • M. A. Khromov

   OriginalPaper 16 July 2019 Pages: 228 - 237

   

4. Influence of “Soft” Reduction on the Structure of Continuous Cast Ingot and the Properties of Rolled Products of Microalloyed Steels

   • A. N. Zavalishchin
   • M. I. Rumyantsev
   • E. V. Kozhevnikova

   OriginalPaper 12 July 2019 Pages: 238 - 248

   

5. Improvement of Heat-Treatment Conditions for Square-Cross-Section Steel Billets Downstream of a Continuous-Section Billet Casting Machine

   • S. V. Lukin
   • K. Yu. Levashev

   OriginalPaper 18 July 2019 Pages: 249 - 256

   

6. Improving the Control of the OEMK Heating Furnaces by Using Parameter-Scheduled Adaptive PI Controllers

   • A. V. Fomin
   • A. I. Glushchenko

   OriginalPaper 13 July 2019 Pages: 257 - 263

   

7. Austenitic Structure Evolution During Pipe Steel Coiled Rolled Product Manufacture in Casting and Rolling Complexes of Different Configurations

   • A. V. Muntin
   • A. V. Chastukhin
   • L. I. Éfron

   OriginalPaper 13 July 2019 Pages: 264 - 276

   

8. Investigation of Production Conditions for Ultra-Low Carbon IF-, IF-HS-Steels from Cold-Rolled Product of Different Strength Classes Annealed in Bell Furnaces

   • A. I. Zaitsev
   • A. V. Koldaev
   • I. A. Krasnyanskaya

   OriginalPaper 12 July 2019 Pages: 277 - 285

   

9. Damping Steels for Sheet Stacker Components During Sheet Rolling

   • E. B. Utepov
   • E. P. Pototskii
   • A. S. Berkinbaeva

   OriginalPaper 16 July 2019 Pages: 286 - 294

   

10. Electron-Beam Surface Treatment of Titanium Alloy Ingots. Part 2

    • S. V. Akhonin
    • A. N. Pikulin
    • A. D. Ryabtsev

    OriginalPaper 13 July 2019 Pages: 295 - 299

    

11. Rare Earth Metal Extraction from Apatite Ores

    • O. V. Cheremisina
    • V. V. Sergeev
    • A. P. Il’ina

    OriginalPaper 12 July 2019 Pages: 300 - 307

    

12. Special Titanium-Containing Coating Application Technology

    • S. I. Mirgorodskii
    • G. D. Bitsoev
    • S. V. Kaigorodov

    OriginalPaper 16 July 2019 Pages: 308 - 319

    

13. Assimilation of Steel Contemporary Extra-Furnace Treatment Technology with the Aim of Reducing Metal Contamination with Nonmetallic Inclusions

    • V. V. Emel’yanov
    • I. S. Murzin
    • I. V. Garkushenko

    OriginalPaper 12 July 2019 Pages: 320 - 323

    

14. Metallurgist Volume 63, Number 4

    Announcement 07 August 2019 Pages: 324 - 326

15. Charging System Enhancements for a Blast Furnace at Azovstal Iron and Steel Works Private Joint-Stock Corporation

    • S. V. Sosin
    • S. A. Karikov
    • V. V. Semakov

    OriginalPaper 12 July 2019 Pages: 327 - 334

    

16. Introduction of Energy Efficient Solutions During Cast Iron Smelting at PJSC “NLMK”

    • S. V. Filatov
    • I. F. Kurunov
    • S. A. Zagainov

    OriginalPaper 16 July 2019 Pages: 335 - 340

    

17. Calculation and Analysis of the Relationship Between the Efficiency and Position of Electric Arcs and Power Consumption in Electric Arc Furnaces (EAF) of Smaller and Larger Capacity. Part I. Calculation and Analysis of the Relationship Between Arc Efficiency and Power Consumption

    • A. N. Makarov

    OriginalPaper 13 July 2019 Pages: 341 - 349

    

18. Assessment of the Stress–Strain State of the Strand and Caster Near the Foot Rollers in the Secondary-Cooling Zone

    • M. V. Androsenko

    OriginalPaper 13 July 2019 Pages: 350 - 355

    

19. Optimization of the Composition and Amount of Nonmetallic Inclusions in a Continuously Cast Billet Based on the Deoxidation of the Melt with Aluminum and Calcium Carbide

    • D. V. Rutskii
    • G. V. Babin
    • Yu. L. Kornev

    OriginalPaper 16 July 2019 Pages: 356 - 365

    

20. Study of Transient and Steady-State Stages During Two-High and Three-High Screw Rolling of a 12Kh18N10T Steel Workpiece

    • M. M. Skripalenko
    • B. A. Romantsev
    • V. V. Cheverikin

    OriginalPaper 13 July 2019 Pages: 366 - 375

    

21. Improvement of Low-Alloy Pipe Steel Sulfide Stress Cracking Resistance

    • A. A. Kholodnyi
    • Ya. S. Kuznechenko
    • D. I. Yusupov

    OriginalPaper 16 July 2019 Pages: 376 - 387

    

22. Improvement of a Set of Steel Properties Due to Forming Phase Precipitates During Hot Deformation Combined with Quenching

    • A. V. Koldaev
    • F. V. Arifulov
    • A. I. Zaitsev

    OriginalPaper 12 July 2019 Pages: 388 - 393

    

23. Production Features of Magnesium-Neodymium Master Alloy Synthesis

    • S. A. Savchenkov
    • V. Yu. Bazhin
    • V. L. Ugolkov

    OriginalPaper 16 July 2019 Pages: 394 - 402

    

24. Development of a Production Scheme for Utilizing Vanadium Pentoxide Hydrometallurgical Production Waste

    • U. A. Kologrieva
    • A. I. Volkov
    • M. G. Mirakova

    OriginalPaper 13 July 2019 Pages: 403 - 408

    

25. Features of VZhL21 Nickel-Base Superalloy Structure Formation During Selective Laser Melting, Vacuum Heat Treatment, and Hot Isostatic Compaction

    • D. I. Sukhov
    • N. V. Petrushin
    • M. M. Tikhonov

    OriginalPaper 16 July 2019 Pages: 409 - 421

    

26. Effect of Continuous Extrusion Parameters on Alloy M1 Round Section Bar Microstructure and Mechanical Property Formation

    • A. V. Zinov’ev
    • A. N. Koshmin
    • A. Ya. Chasnikov

    OriginalPaper 12 July 2019 Pages: 422 - 428

    

27. Correction to: Structure Formation in the Zones of Joints Obtained by Explosion Welding with Subsequent Rolling of a Five-Layer Titanium-Steel Composite

    • V. N. Arisova
    • L. M. Gurevich
    • V. O. Kharlamov

    Correction 20 July 2019 Pages: 429 - 429