Articles

1. Simulation of heat-transfer conditions and development of a method for heating a sinter charge with water preheated using the heat of exhaust gases

   • D. A. Vlasenko

   OriginalPaper 03 May 2024

   

2. Study of mandrel wear during billet piercing on the MISiS-130D screw rolling mill

   • V. A. Lakiza
   • B. A. Romancev
   • K. I. Nazarov

   OriginalPaper 03 May 2024

   

3. Study of the austenite transformation in high-strength steel during quenching and partitoning

   • M. V. Maisuradze
   • A. A. Kuklina
   • E. V. Antakov

   OriginalPaper 03 May 2024

   

4. Development of a method for discrete-continuous inverting control of pressure control circuit inside a heating furnace

   • A. V. Fomin

   OriginalPaper 03 May 2024

   

5. Simulating the process of aluminum alloy ingots crystallization in semi-continuous casting

   • A. I. Bezrukikh
   • I. L. Konstantinov
   • Yu. V. Baykovskiy

   OriginalPaper 03 May 2024

   

6. Material composition and diagnostic leaching tests of gold mine tailings dump (taror deposit, Tajikistan)

   • I. R. Boboev
   • T. Kholikzoda
   • T. S. Saidova

   OriginalPaper 03 May 2024

   

7. Solid-phase recycling of non-compact waste of cast metal-matrix composites

   • A. V. Aborkin
   • E. S. Prusov
   • I. V. Vilkov

   OriginalPaper 03 May 2024

   

8. Development of rational conditions for cold rolling of AD33 alloy tapes on an industrial 175 × 300 mill using the results of computer simulation

   • R. L. Shatalov
   • V. H. Pham
   • V. Q. Tran

   OriginalPaper 03 May 2024

   

9. Characteristics of experimental hard alloy WC+(Co+Mo+Ti) in the process of friction against steels 15Kh2NMFA and 10GN2MFA without lubrication

   • E. V. Fominov
   • V. E. Gvindjiliya
   • D. I. Gladckih

   OriginalPaper 03 May 2024

   

10. Structure and viscosity of slags containing cerium oxide

    • A. G. Upolovnikova
    • R. R. Shartdinov
    • A. N. Smetannikov

    OriginalPaper 02 May 2024

    

11. Complex heat transfer in a bath under arcs of high-power arc steel-melting furnaces. Part II. Conversion of radiant arc flows into convection and heat conduction flows in the bath

    • A. N. Makarov

    OriginalPaper 02 May 2024

    

12. Effect of post-treatment on lattice structure and properties of additively prepared Ti–6Al–4V alloy

    • Yu. N. Loginov
    • S. I. Stepanov
    • E. Yu. Slukin

    OriginalPaper 02 May 2024

    

13. Application of hydrogen in production of ferroalloys

    • A. S. Akhmetov
    • Zh. V. Eremeeva
    • E. N. Makhambetov

    OriginalPaper 02 May 2024

    

14. Study of titanium nickelide based alloy structure effect on biological environment corrosion resistance

    • E. A. Lukina
    • M. Yu. Kollerov
    • D. E. Gusev

    OriginalPaper 02 May 2024

    

15. Formation Characteristics of Damascene Structure of a 17th Century Persian Saber Shamshir

    • D. A. Sukhanov
    • N. V. Plotnikova

    OriginalPaper 12 March 2024 Pages: 1576 - 1588

    

16. Separation of Oily Mill Scale Into Components

    • R. N. Khamidullin
    • M. Yu. Velichko
    • M. V. Grishchenko

    OriginalPaper 12 March 2024 Pages: 1570 - 1575

    

17. A Mathematical Model for the Operational Evaluation of the Dynamics of Heat and Mass Exchange in Flash Evaporators

    • A. S. Andreev
    • K. V. Aksenchik

    OriginalPaper 12 March 2024 Pages: 1561 - 1569

    

18. Artificial Intelligence and Machine Learning In Metallurgy. Part 2. Application Examples

    • P. Yu. Zhikharev
    • A. V. Muntin
    • M. O. Kryuchkova

    OriginalPaper 13 March 2024 Pages: 1545 - 1560

    

19. Study of Out-of-Roundness of a Railway Wheel Blank During Upsetting

    • S. A. Snitko
    • S. M. Gorbatyuk
    • A. A. Tokar

    OriginalPaper 12 March 2024 Pages: 1538 - 1544

    

20. Modeling Reeling Process of Capillary Tubes Following Mandrel Drawing

    • S. V. Parshin
    • P. S. Khlebnikov
    • A. A. Parshina

    OriginalPaper 12 March 2024 Pages: 1532 - 1537

    

21. Computer-Simulation Assessment of the Stress–Strain and Kinematic States of a Titanium Nickelide Billet during Screw Rolling

    • M. M. Skripalenko
    • B. A. Romantsev
    • Y. A. Gladkov

    OriginalPaper 13 March 2024 Pages: 1523 - 1531

    

22. Modeling Thermal Welding Cycles of Medium-Carbon High-Strength Steels for Predicting the Mechanical Properties of Real Welded Joints

    • A. A. Pavlov
    • V. L. Evtukhov
    • G. N. Eremin

    OriginalPaper 12 March 2024 Pages: 1516 - 1522

    

23. Processing of Rare Earth Metal Oxide for Use as a Master Alloy in the Metallurgical Industry

    • I. S. Nikulin
    • T. B. Nikulicheva
    • Yu.I. Karlina

    OriginalPaper 11 March 2024 Pages: 1506 - 1515

    

24. Studies of the Influence of D -Transition Rare Earth Metals on Steel Resistance

    • T. N. Ivanova

    OriginalPaper 13 March 2024 Pages: 1494 - 1505

    

25. Material Science Aspects of Titanium Tube Production. Part 2. Production of Cold-Rolled Tubes

    • D. A. Pumpyanskiy
    • A. G. Illarionov
    • A. A. Popov

    OriginalPaper 12 March 2024 Pages: 1482 - 1493

    

26. Structure and Properties of Coatings Formed on Cast Al–Ca Alloys by Plasma Electrolytic Oxidation

    • N. V. Letyagin
    • T. К. Akopyan
    • P. A. Palkin

    OriginalPaper 12 March 2024 Pages: 1473 - 1481

    

27. Anodic Behavior of AK7 Aluminum Alloy and Composite Material of the Al–Al₂O₃ System within an NaCl Electrolyte Solution Medium

    • M. Mahmudzoda
    • B. B. Eshov
    • J. H. Dzhailoev

    OriginalPaper 11 March 2024 Pages: 1466 - 1472

    

28. Choice of a Sorbent for Copper and Cobalt Sorption from Gold-Containing Heap Leaching Solutions

    • E. S. Kanaly
    • B. N. Surimbaev
    • S. T. Shalgymbaev

    OriginalPaper 12 March 2024 Pages: 1457 - 1465

    

29. Effect of Chromium on Microstructure and Mechanical Properties of Al–Cu–Er–Zr Alloy

    • S. M. Amer
    • M. V. Glavatskikh
    • A. V. Pozdnyakov

    OriginalPaper 15 March 2024 Pages: 1448 - 1456

    

30. Complex Heat Transfer in a Bath under Arcs of High-Power Arc Steel-Melting Furnaces. Part I. Laws of Thermal Radiation of Gas Volumes and their Rationale for Calculating Heat Transfer in EAFs

    • A. N. Makarov

    OriginalPaper 11 March 2024 Pages: 1438 - 1447

    

31. Influence of Cast Structure Parameters on Ductility Properties of Low-Carbon Microalloyed Steels

    • A. N. Filatov
    • E. A. Goli-Oglu
    • V. V. Naumenko

    OriginalPaper 12 March 2024 Pages: 1425 - 1437

    

32. Metallurgist Volume 67, Number 10

    Acknowledgments 23 March 2024 Pages: 1422 - 1424

33. Effect of NaCl in Surrounding Atmosphere on Oxidation Rate of HBI

    • A. S. Timofeeva
    • A. B. Harutyunyan
    • V. V. Fedina

    OriginalPaper 11 March 2024 Pages: 1418 - 1421

    

34. Decarbonization of Exhaust Gases of Industrial Metallurgical Furnaces

    • V. Yu. Bazhin
    • O. N. Masko
    • L. N. Nikitina

    OriginalPaper 11 March 2024 Pages: 1407 - 1417

    

35. Ecological Aspects of Integrated Technology for Processing Lithium-Cobalt Batteries with the Production of Pelletized Target Products

    • V. I. Nazarov
    • D. A. Makarenkov
    • A. P. Popov

    OriginalPaper 11 March 2024 Pages: 1396 - 1406

    

36. Study of Technological Properties and Processing Feasibility for Various Types of Vanadium Raw Materials in Russia

    • A. I. Volkov
    • P. E. Stulov
    • A. F. Charkin

    OriginalPaper 11 March 2024 Pages: 1379 - 1395

    

37. Simulation Modelling of Technological Processes in Power and Utility Supply and Environmental Management at Chermk of Pao Severstal

    • A. A. Zaitsev
    • P. A. Murashev
    • D. V. Tsymai

    OriginalPaper 11 March 2024 Pages: 1373 - 1378

    

38. Mathematical Modeling of Extrusion Agglomeration

    • A. M. Bizhanov

    OriginalPaper 09 March 2024 Pages: 1362 - 1372

    

39. Investigation of the Recovery Process During Continuous Annealing of Cold-Rolled Automotive Steels

    • P. S. Zhitelev
    • R. R. Adigamov
    • N. A. Golubkov

    OriginalPaper 08 March 2024 Pages: 1351 - 1361

    

40. The Role of the Weld Metal Structure Formation in Selecting Rational Cooling Rates When Welding K80 Strength Grade Steel

    • L. A. Efimenko
    • A. A. Ramus
    • R. Yu. Muratov

    OriginalPaper 08 March 2024 Pages: 1344 - 1350

    

41. Structure and Properties of Welded Joints of High-Strength Steels Made by Metal-Cored Wire with Nitrogen

    • A. S. Smolentsev
    • V. E. Veselova
    • A. V. Shak

    OriginalPaper 09 March 2024 Pages: 1334 - 1343

    

42. Plasma Electrolytic Oxidation of Aluminum-Calcium Binary Alloys in a Cast Condition

    • N. V. Letyagin
    • T. К. Akopyan
    • A. G. Tsydenov

    OriginalPaper 09 March 2024 Pages: 1325 - 1333

    

43. Process of Sintering Iron-Based Powder Materials Alloyed with Copper with Introduction of Various Plasticizers Into an Initial Charge

    • J. V. Eremeeva
    • Y. S. Ter-Vaganyants
    • O. V. Korznikov

    OriginalPaper 07 March 2024 Pages: 1315 - 1324

    

44. Investigation of the Effect of Cerium on the Structure and Properties of Calcium-Containing Aluminum Alloys

    • E. A. Naumova
    • M. A. Vasina
    • A. O. Bobrysheva

    OriginalPaper 09 March 2024 Pages: 1302 - 1314

    

45. Technology for the Producing Calibrated Bars Made of Aluminum Alloy 6082 Prepared Using Ingotless Rolling-Pressing

    • S. B. Sidelnikov
    • E. S. Lopatina
    • A. V. Durnopyanov

    OriginalPaper 07 March 2024 Pages: 1293 - 1301

    

46. Microstructure, Mechanical, and Corrosion Properties of Cast Heat-Resistant Al–4Zn–4Mg–4Cu–Zr–Y(Er) Alloy

    • M. V. Glavatskikh
    • L. E. Gorlov
    • A. V. Pozdniakov

    OriginalPaper 11 March 2024 Pages: 1279 - 1292

    

47. Aspects of Continuous Rolling When Starting with Unreduced Strip

    • G. P. Kornilov
    • R. R. Khramshin
    • S. V. Troynov

    OriginalPaper 01 March 2024 Pages: 1269 - 1278

    

48. Enhancing the Quality of Electrotechnical Steel Grade Slab Billets via Electromagnetic Stirring in the CCM Secondary Cooling Zone

    • G. N. Kononyhin
    • D. V. Burkov
    • Yu.M. Rogatchikov

    OriginalPaper 01 March 2024 Pages: 1260 - 1268

    

49. Development of a Technology for the Production of Vacuum-Degassed Steel with an Increased Nitrogen Concentration

    • S. S. Belonozhko
    • G. I. Kotelnikov
    • S. V. Tyutyunik

    OriginalPaper 01 March 2024 Pages: 1252 - 1259

    

50. Development and Production of New High-Strength Steel

    • A. A. Pavlov
    • G. N. Eremin
    • P. V. Shilyaev

    OriginalPaper 01 March 2024 Pages: 1247 - 1251