The erosive wear of mild and stainless steels under controlled corrosion in alkaline slurries containing alumina particles H. W. WangM. M. Stack OriginalPaper Pages: 5263 - 5273
Preparation of alkaline earth carbonates and oxides by the EDTA-gel process S. N. B. HodgsonX. ShenF. R. Sale OriginalPaper Pages: 5275 - 5282
Stability of SrZr0.9Yb0.1O3−α protonic conductor in atmosphere containing nitrogen oxides (NOx) T. KobayashiS. MorishitaH. Iwahara OriginalPaper Pages: 5283 - 5289
O2, CH4 and CO2 gas retentions by acid smectites before and after thermal treatment C. VolzoneJ. Ortiga OriginalPaper Pages: 5291 - 5294
Synthesis and characterization of cadmium titanium oxide powders by sol-gel technique A. R. PhaniM. PassacantandoS. Santucci OriginalPaper Pages: 5295 - 5299
Effect of particle packing on extrusion behavior of pastes Zhong Chun ChenK. IkedaT. Takeda OriginalPaper Pages: 5301 - 5307
Fabrication of polymer matrix composites reinforced with controllably oriented whiskers L. F. ChenY. P. HongJ. L. Qiu OriginalPaper Pages: 5309 - 5312
FTIR investigations of solid precursor materials for sol-gel deposition of WO3 based electrochromic films M. DeepaN. SharmaS. A. Agnihotry OriginalPaper Pages: 5313 - 5318
Evaluation of volume fraction of solid in alloys formed by semisolid processing E. TzimasA. Zavaliangos OriginalPaper Pages: 5319 - 5330
Damage threshold velocities for liquid impact C. F. KennedyJ. E. Field OriginalPaper Pages: 5331 - 5339
Nitriding of iron boride to hexagonal boron nitride T. E. WarnerD. J. Fray OriginalPaper Pages: 5341 - 5345
Short thermal fatigue crack propagation behavior of alumina short fibre reinforced aluminum matrix composites Shenqing WuWenjuan Xu OriginalPaper Pages: 5347 - 5351
Infrared spectroscopic evaluation of the photodegradation of paint Part II: The effect of UV intensity & wavelength on the degradation of acrylic films pigmented with titanium dioxide P. A. ChristensenA. DilksJ. Temperley OriginalPaper Pages: 5353 - 5358
Multi-length scale modeling of CVD of diamond Part I A combined reactor-scale/atomic-scale analysis M. GrujicicS. G. Lai OriginalPaper Pages: 5359 - 5369
Multi-length scale modeling of CVD of diamond Part II A combined atomic-scale/grain-scale analysis M. GrujicicS. G. Lai OriginalPaper Pages: 5371 - 5381
Pressureless sintering of metal-bonded diamond particle composite blocks Yu-Zan HsiehJing-Fure ChenShun-Tian Lin OriginalPaper Pages: 5383 - 5387
Effect of rare-earth oxide(CeO2) on the microstructures in laser melted layer Y. M. ZhangM. HidaS. X. Wang OriginalPaper Pages: 5389 - 5400
Mechanochemical synthesis of hydroxyapatite from Ca(OH)2-P2O5 and CaO-Ca(OH)2-P2O5 mixtures Wantae KimQiwu ZhangFumio Saito OriginalPaper Pages: 5401 - 5405
Effect of a cerium/tin doping mixture on the texturing process and on the superconducting properties of top seeded melt textured YBaCuO C. Leblond-HarnoisI. MonotG. Desgardin OriginalPaper Pages: 5407 - 5413
Preparation of nanosized LaCoO3 perovskite oxide using amorphous heteronuclear complex as a precursor at low temperature Yongfa ZhuRuiqin TanLili Cao OriginalPaper Pages: 5415 - 5420
Ferroelectric and dielectric properties of ferroelectromagnet Pb(Fe1/2Nb1/2)O3 ceramics and thin films X. S. GaoX. Y. ChenM. Wang OriginalPaper Pages: 5421 - 5425
Examination of the thermophysical bond of insert-molded PC/C fiber composites C. W. ExtrandS. Bhatt OriginalPaper Pages: 5427 - 5432
Sintering characteristics and dielectric properties of silver-doped PMN-PZN-PT relaxor ferroelectric ceramics Ruzhong ZuoLongtu LiZhilun Gui OriginalPaper Pages: 5433 - 5436
Effect of calcination conditions of self-sintering mesocarbon microbeads on the characteristics of resulting graphite R. K. AggarwalG. BhatiaN. Punjabi OriginalPaper Pages: 5437 - 5442
Effect of V2O5 and CuO additives on sintering behavior and microwave dielectric properties of BiNbO4 ceramics Cheng-Liang HuangMin-Hang WengGai-Ming Shan OriginalPaper Pages: 5443 - 5447
Tensile failure in fiber reinforced ceramic matrix composites Yih-Cherng Chiang OriginalPaper Pages: 5449 - 5455
Biaxial dielectric properties of phenyl ester ferroelectric liquid crystal mixture Y. B. KimI. K. HurS. T. Lagerwall OriginalPaper Pages: 5457 - 5463
Investigating the influence of fabrication process and crystal orientation on shear strength of silicon microcomponents Quanfang ChenDa-Jeng YaoG. P. Carman OriginalPaper Pages: 5465 - 5474
Phase evolution and microstructural development in sol-gel derived MSnO3 (M = Ca, Sr and Ba) A.-M. AzadM. HashimA. Ul. Haq OriginalPaper Pages: 5475 - 5483
Reaction of Si3N4 with 25%Cr-20%Ni austenitic stainless steel under nitrogen or argon atmosphere T. ShimooK. OkamuraD. Shibata OriginalPaper Pages: 5485 - 5492
The tribological characteristics of the Al-20Si-3Cu-1Mg alloy reinforced with Al2O3 particles in relation to the hardness of a mating steel D. BialoJ. ZhouJ. Duszczyk OriginalPaper Pages: 5497 - 5501
Particle packing and rheological property of highly-concentrated ceramic suspensions: φm determination and viscosity prediction Dean-Mo Liu OriginalPaper Pages: 5503 - 5507
Sintering behaviour of slip-cast Al2O3 – Y-TZP composites S. RameshL. F. SiahA. K. Nor Azmah OriginalPaper Pages: 5509 - 5515
Cation distribution of the system CuAlxFe2−xO4 by X-rays and Mossbauer studies B. S. TrivediN. N. JaniR. G. Kulkarni OriginalPaper Pages: 5523 - 5526