Journal of Materials Science - Read Journal of Materials Science Articles Written by our Editors
Journal of Materials Science invites you to read highlighted articles authored by our Editors.
First-principles interpretation toward the effects of Cu, Mg co-segregation on the strength of Al Σ5 (210) grain boundary (this opens in a new tab)
By Ning Ma, Xuehao Yu, Enzuo Liu, Dongdong Zhao, Junwei Sha, Chunnian He, Yanjun Li & Naiqin Zhao
Published January 2024
Recrystallization of bulk nanostructured magnesium alloy AZ31 after severe plastic deformation: an in situ diffraction study (this opens in a new tab)
By Klaus-Dieter Liss, Jae-Kyung Han, Malte Blankenburg, Ulrich Lienert, Stefanus Harjo, Takuro Kawasaki, Pingguang Xu, Eitaro Yukutake & Megumi Kawasaki
Published January 2024
Data-driven search for promising intercalating ions and layered materials for metal-ion batteries (this opens in a new tab)
By S. Parida, A. Mishra, Q. Yang, A. Dobley, C. Barry Carter & A. M. Dongare
Published January 2024
Review: recent progress in aluminum matrix composites reinforced by in situ oxide ceramics (this opens in a new tab)
By Xudong Rong, Dongdong Zhao, Chunnian He & Naiqin Zhao
Published December 2023
Control over the mechanical properties of surface-magnetized alumina magnetically freeze-cast scaffolds (this opens in a new tab)
Maddie A. Schmitz, Isaac Nelson & Steven E. Naleway
Published November 2023
X-ray line profile analysis study on the evolution of the microstructure in additively manufactured 316L steel during severe plastic deformation (this opens in a new tab)
By Jenő Gubicza, Megumi Kawasaki, Zoltán Dankházi, Márk Windisch & Moustafa El-Tahawy
Published October 2023
Materials and wetting issues in molten carbonate fuel cell technology: a review (this opens in a new tab)
By Liangjuan Gao, J. Robert Selman & Philip Nash
Published October 2023
Graphene oxide nanobrick wall for gas barrier and fire protection of polystyrene (this opens in a new tab)
By Bethany Palen, Ethan T. Iverson, Matthew G. Rabaey, Sashi Kulatilaka & Jaime C. Grunlan
Published April 2023
A review of the material and mechanical properties of select Ganoderma fungi structures as a source for bioinspiration (this opens in a new tab)
By Debora Lyn Porter, Elise C. Hotz, Jessie K. Uehling & Steven E. Naleway
Published February 2023
Cold angular rolling process as a continuous severe plastic deformation technique (this opens in a new tab)
By Leonardo M. Reis, Amanda P. Carvalho, Isshu Lee, Yun-Hsuan Wu, Jae-Kyung Han, Melissa K. Santala, Megumi Kawasaki & Roberto B. Figueiredo
Published February 2023
Unraveling the enhanced stability and strength of Al Σ9 (221)[110] symmetric tilt grain boundary with Mg segregation (this opens in a new tab)
By Ning Ma, Dongdong Zhao, Chunsheng Shi, Chunnian He, Enzuo Liu, Junwei Sha, Yanjun Li & Naiqin Zhao
Published December 2022
Interlaminar fracture toughness of carbon fibre composites with electrospun nanofibrous interleaves of polystyrene and cellulose nanocrystals (this opens in a new tab)
By Konstantina Kanari, Michael R. Wisnom, Robert Harniman & Stephen J. Eichhorn
Published November 2022
Powder bed fusion additive manufacturing of Ni-based superalloys: a review of the main microstructural constituents and characterization techniques (this opens in a new tab)
By Michael P. Haines, Vitor V. Rielli, Sophie Primig & Nima Haghdadi
Published July 2022
Lath martensite substructure evolution in low-carbon microalloyed steels (this opens in a new tab)
By Arnab Chakraborty, Richard F. Webster & Sophie Primig
Published May 2022
Al matrix composites reinforced by in situ synthesized graphene–Cu hybrid layers: interface control by spark plasma sintering conditions (this opens in a new tab)
By Bowen Pu, David Mesguich, Claude Estournès, Xiang Zhang, Geoffroy Chevallier, Naiqin Zhao & Christophe Laurent
Published March 2022
Texture evolution in a CrMnFeCoNi high-entropy alloy manufactured by laser powder bed fusion (this opens in a new tab)
By X. Y. He, H. Wang, Z. G. Zhu, L. Z. Wang, J. Q. Liu, N. Haghdadi, S. M. L. Nai, J. Huang, S. Primig, S. P. Ringer & X. Z. Liao
Published March 2022
Current international research into cellulose as a functional nanomaterial for advanced applications (this opens in a new tab)
By S. J. Eichhorn, A. Etale, J. Wang, L. A. Berglund, Y. Li, Y. Cai, C. Chen, E. D. Cranston, M. A. Johns, Z. Fang, G. Li, L. Hu, M. Khandelwal, K.-Y. Lee, K. Oksman, S. Pinitsoontorn, F. Quero, A. Sebastian, M. M. Titirici, Z. Xu, S. Vignolini & B. Frka-Petesic
Published March 2022
Cross-linking and silanization of clay-based multilayer films for improved corrosion protection of steel (this opens in a new tab)
By Carolyn T. Long, Lin Chen, Ethan T. Iverson, Homero Castaneda & Jaime C. Grunlan
Published January 2022
Invited viewpoint: in situ nanostructured lamellar composites (this opens in a new tab)
By Philip Nash & Yang Zhou
Published January 2022
Effect of graphene nanoplatelets on the mechanical and gas barrier properties of woven carbon fibre/epoxy composites (this opens in a new tab)
By Xudan Yao, Thomas P. Raine, Mufeng Liu, Muzdalifah Zakaria, Ian A. Kinloch & Mark A. Bissett
Published September 2021
3D characterization of microstructural evolution and variant selection in additively manufactured Ti-6Al-4 V (this opens in a new tab)
By Ryan DeMott, Nima Haghdadi, Xiaozhou Liao, Simon P. Ringer & Sophie Primig
Published June 2021
Organic thermoelectric thin films with large p-type and n-type power factor (this opens in a new tab)
By Chungyeon Cho, Yixuan Song, Jui-Hung Hsu, Choongho Yu, Daniel L. Stevens & Jaime C. Grunlan
Published November 2020
Influence of A-site non-stoichiometry on electromechanical properties of Sr(Hf0.5Zr0.5)O3-modified Bi0.5(Na0.8K0.2)0.5TiO3 piezoelectric ceramics (this opens in a new tab)
By Sanu K. Gupta, Brady J. Gibbons, Peter Mardilovich & David P. Cann
Published September 2020
Conduction properties of acceptor-doped BaTiO3–Bi(Zn1/2Ti1/2)O3-based ceramics (this opens in a new tab)
By Ryan R. McQuade, Pavel Mardilovich, Nitish Kumar & David P. Cann
Published September 2020
Solid-state reactive sintering of dense and highly conductive Ta-doped Li7La3Z2O12 using CuO as a sintering aid (this opens in a new tab)
By Changlong Li, Akihiro Ishii, Lindsay Roy, Dale Hitchcock, Yuqing Meng & Kyle Brinkman
Published September 2020
Additive manufacturing of steels: a review of achievements and challenges (this opens in a new tab)
By Nima Haghdadi, Majid Laleh, Maxwell Moyle & Sophie Primig
Published August 2020
Flame suppression of polyamide through combined enzymatic modification and addition of urea to multilayer nanocoating (this opens in a new tab)
By Igor Jordanov, Thomas J. Kolibaba, Simone Lazar, Eva Magovac, Sandra Bischof & Jaime C. Grunlan
Published July 2020
Multimodal γ′ precipitation in Inconel-738 Ni-based superalloy during electron-beam powder bed fusion additive manufacturing (this opens in a new tab)
By Nima Haghdadi, Edward Whitelock, Bryan Lim, Hansheng Chen, Xiaozhou Liao, Sudarsanam S. Babu, Simon P. Ringer & Sophie Primig
Published June 2020
Materials Science in the time of Coronavirus (this opens in a new tab)
By Annela M. Seddon
Published May 2020
A versatile route to edge-specific modifications to pristine graphene by electrophilic aromatic substitution (this opens in a new tab)
By Philippa M. Shellard, Thunyaporn Srisubin, Mirja Hartmann, Joseph Butcher, Fan Fei, Henry Cox, Thomas P. McNamara, Trevor McArdle, Ashley M. Shepherd, Robert M. J. Jacobs, Thomas A. Waigh, Sabine L. Flitsch & Christopher F. Blanford
Published May 2020
Crushing behavior and energy absorption property of carbon nanotube-reinforced aluminum composite foam-filled 6061 aluminum alloy tubes (this opens in a new tab)
By Jiali Xu, Xudong Yang, Chunnian He, Kunming Yang, Weiting Li, Junwei Sha & Naiqin Zhao
Published March 2020
Exploring the links between crystal chemistry, cesium retention, thermochemistry and chemical durability in single-phase (Ba,Cs)1.33(Fe,Ti)8O16 hollandite (this opens in a new tab)
By Mingyang Zhao, Patrick Russell, Jake Amoroso, Scott Misture, Stephen Utlak, Theodore Besmann, Lindsay Shuller-Nickles & Kyle S. Brinkman
Published February 2020
Effect of SiC nanoparticles on the precipitation behavior and mechanical properties of 7075Al alloy (this opens in a new tab)
By Bowen Pu, Xiaobin Lin, Bowen Li, Xiaofeng Chen, Chunnian He & Naiqin Zhao
Published February 2020
Magnetic bacterial cellulose and carbon nanofiber aerogel by simple immersion and pyrolysis (this opens in a new tab)
By Nipaporn Sriplai, Wiyada Mongkolthanaruk, Stephen J. Eichhorn & Supree Pinitsoontorn
Published December 2019
Ethanol steam reforming: understanding changes in the activity and stability of Rh/MxOy catalysts as function of the support (this opens in a new tab)
By Thenner S. Rodrigues, Felipe A. e Silva, Eduardo G. Candido, Anderson G. M. da Silva, Rafael dos S. Geonmonond, Pedro H. C. Camargo, Marcelo Linardi & Fabio C. Fonseca
Published May 2019
Review: recent progress in low-temperature proton-conducting ceramics (this opens in a new tab)
By Yuqing Meng, Jun Gao, Zeyu Zhao, Jake Amoroso, Jianhua Tong & Kyle S. Brinkman
Published April 2019
Dissolution of antiphase domain boundaries in GaAs on Si(001) via post-growth annealing (this opens in a new tab)
By C. S. C. Barrett, A. Atassi, E. L. Kennon, Z. Weinrich, K. Haynes, X.-Y. Bao, P. Martin & K. S. Jones
Published January 2019
In situ synthesis of copper-modified graphene-reinforced aluminum nanocomposites with balanced strength and ductility (this opens in a new tab)
By Jie Wang, Xiang Zhang, Naiqin Zhao & Chunnian He
Published December 2018
Structural characterization of A-site nonstoichiometric (1 − x)Bi0.5Na0.5TiO3–xBaTiO3 ceramics (this opens in a new tab)
By Sasiporn Prasertpalichat, Theeranun Siritanon, Noppadon Nuntawong & David P. Cann
Published October 2018
Compositional control of tunnel features in hollandite-based ceramics: structure and stability of (Ba,Cs)1.33(Zn,Ti)8O16 (this opens in a new tab)
By R. Grote, M. Zhao, L. Shuller-Nickles, J. Amoroso, W. Gong, K. Lilova, A. Navrotsky, M. Tang & K. S. Brinkman
Published September 2018
Synthesis of highly dispersed gold nanoparticles on Al2O3, SiO2, and TiO2 for the solvent-free oxidation of benzyl alcohol under low metal loadings (this opens in a new tab)
By Jesus A. D. Gualteros, Marco A. S. Garcia, Anderson G. M. da Silva, Thenner S. Rodrigues, Eduardo G. Cândido, Felipe A. e Silva, Fabio C. Fonseca, Jhon Quiroz, Daniela C. de Oliveira, Susana I. Córdoba de Torresi, Carla V. R. de Moura, Pedro H. C. Camargo & Edmilson M. de Moura
Published August 2018
Impact of mechanical stress on barium titanate-based positive temperature coefficient resistive material (this opens in a new tab)
By Yongping Pu, Lei Zhang, Peter Keil, Nikola Novak & Till Frömling
Published August 2018
Structural supercapacitors using a solid resin electrolyte with carbonized electrospun cellulose/carbon nanotube electrodes (this opens in a new tab)
By Qiang Li, Yanqiu Q. Zhu & Stephen J. Eichhorn
Published July 2018
Mechanistic study of the reduction of MoO2 to Mo2C under methane pulse conditions (this opens in a new tab)
By Qusay Bkour, Christian Martin Cuba-Torres, Oscar G. Marin-Flores, Shalini Tripathi, N. Ravishankar, M. Grant Norton & Su Ha
Published June 2018
Reduced graphene oxide/Fe-phthalocyanine nanosphere cathodes for lithium-ion batteries (this opens in a new tab)
By Dongxu He, Weidong Xue, Rui Zhao, Wencheng Hu, Alexander J. Marsden & Mark A. Bissett
Published March 2018
Interfacial stability of graphene-based surfaces in water and organic solvents (this opens in a new tab)
By Ho Shin Kim, Thomas J. Oweida & Yaroslava G. Yingling
Published December 2017
Wood-plastic composites based on HDPE and ionic liquid additives (this opens in a new tab)
By Catalin Croitoru, Anca Maria Varodi, Maria Cristina Timar, Ionut Claudiu Roata, Elena Manuela Stanciu & Alexandru Pascu
Published November 2017
Ultrafine high performance polyethylene fibers (this opens in a new tab)
By Jay H. Park & Gregory C. Rutledge
Published October 2017