1. Deposition processes and metal cutting applications of TiN coatings

   • S. Chatterjee
   • S. Chandrashekhar
   • T. S. Sudarshan

   Review Pages: 3409 - 3423

2. Water absorption, swelling, rupture and salt release in salt-silicone rubber compounds

   • R. Schirrer
   • P. Thepin
   • G. Torres

   Papers Pages: 3424 - 3434

3. Oxidation behaviour of 21/4Cr-1Mo steel with prior tempering treatments at 998 K for different durations

   • R. K. Singh Raman
   • J. B. Gnanamoorthy

   Papers Pages: 3435 - 3441

4. Moisture adsorption and desorption properties of some tropical woods

   • A. M. Eligon
   • A. Achong
   • R. Saunders

   Papers Pages: 3442 - 3456

5. Activation energies of the amorphous-crystalline transformation in the Fe₄₀Ni₄₀P₁₄B₆ metallic alloy

   • M. A. Zaki Ewiss
   • S. Saleh

   Papers Pages: 3457 - 3460

6. Effect of a plated Fe-Cr-Ni alloy layer for rapid nitriding of invar

   • K. Gemma
   • M. Kawakami
   • C. Mihara

   Papers Pages: 3461 - 3466

7. Effect of melt superheat and chill material on interfacial heat-transfer coefficient in end-chill Al and Al-Cu alloy castings

   • M. A. Taha
   • N. A. El-Mahallawy
   • R. M. Hammouda

   Papers Pages: 3467 - 3473

8. Ageing characteristics of rapidly solidified Al-Li-Ti alloys at 473 K

   • M. Lieblich
   • M. Torralba

   Papers Pages: 3474 - 3478

9. Copper coating on carbon fibres and their composites with aluminium matrix

   • S. Abraham
   • B. C. Pai
   • V. K. Vaidyan

   Papers Pages: 3479 - 3486

10. Mechanisms of phase transformations during laser treatment of grey cast iron

    • N. Zárubová
    • V. Kraus
    • J. Čermák

    Papers Pages: 3487 - 3496

11. Preparation of semiconducting carbon fibre by pyrolysis of polyacrylonitrile precursor

    • Guang Pan
    • Norio Muto
    • Hiroaki Yanagida

    Papers Pages: 3497 - 3501

12. General method for determination of crack-interface bridging stresses

    • Xiao -Zhi Hu
    • Yiu -Wing Mai

    Papers Pages: 3502 - 3510

13. Fracture toughness, strength and Vickers hardness of yttria-ceria-doped tetragonal zirconia/alumina composites fabricated by hot isostatic pressing

    • M. Hirano
    • H. Inada

    Papers Pages: 3511 - 3518

14. Structure refinement of Pb-6Sb alloy

    • A. M. Assar

    Papers Pages: 3519 - 3526

15. Deterministic method for predicting the strength distribution of a fibre bundle

    • J. J. Masson
    • E. Bourgain

    Papers Pages: 3527 - 3532

16. Nucleation kinetics of primary crystallization products in FeSiB metallic glasses

    • M. A. Gibson
    • G. W. Delamore

    Papers Pages: 3533 - 3538

17. Production of Al-(12–25) wt% Si alloys by rapid solidification: melt spinning versus centrifugal atomization

    • P. Todeschini
    • G. Champier
    • F. H. Samuel

    Papers Pages: 3539 - 3551

18. Influence of rapid solidification route on microstructure and properties of a thermally stable Al-Cr-Zr alloy

    • G. J. Marshall
    • E. K. Ioannidis

    Papers Pages: 3552 - 3564

19. Viscous flow behaviour of Ni_xZr_100−x metallic glasses from Ni₃₀Zr₇₀ to Ni₆₄Zr₃₆

    • K. Russew
    • F. Sommer
    • I. Bakonyi

    Papers Pages: 3565 - 3569

20. Structure-sensitive properties during room-temperature wire drawing at various speeds in nickel 200

    • S. Mehta
    • S. K. Varma

    Papers Pages: 3570 - 3574

21. Superplasticity of mullite-zirconia composite

    • Takayuki Nagano
    • Hidezumi Kato
    • Fumihiro Wakai

    Papers Pages: 3575 - 3580

22. Comparison of waste silica fillers modified with various proadhesive compounds

    • A. Krysztafkiewicz
    • M. Maik
    • B. Rager

    Papers Pages: 3581 - 3588

23. Deformation of NiO single crystals below room temperature: dislocation configurations

    • M. Jiménez-Melendo
    • J. P. Riviére
    • A. Domínguez-Rodríguez

    Papers Pages: 3589 - 3593

24. Double-step lamination of grain-oriented Y-Ba-Cu-O superconducting ceramics

    • S. S. Kim
    • T. T. Srinivasan
    • R. E. Newnham

    Papers Pages: 3594 - 3598

25. Hot-press sintering studies of amorphous silicon nitride powders

    • G. T. Burns
    • J. A. Ewald
    • K. Mukherjee

    Papers Pages: 3599 - 3604

26. Effects of ion implantation on the hardness and friction behaviour of soda-lime silica glass

    • S. J. Bull
    • T. F. Page

    Papers Pages: 3605 - 3616

27. Fabrication of carbon fibre-reinforced aluminium composites with hybridization of a small amount of particulates or whiskers of silicon carbide by pressure casting

    • H. M. Cheng
    • A. Kitahara
    • B. L. Zhou

    Papers Pages: 3617 - 3623

28. Investigation by scanning electron microscope of the effect of geometry and loading mode on blunting of copper sheets

    • P. S. Theocaris
    • V. N. Kytopoulos

    Papers Pages: 3624 - 3636

29. Low-energy ion-beam processing damage in lithium niobate surface-acoustic-wave optical waveguide devices and its post-manufacture removal

    • C. J. G. Kirkby

    Papers Pages: 3637 - 3641

30. Thermal instability of Bi-Pb-Sr-Ca-Cu-O superconductor around 650δC

    • N. Murayama
    • M. Awano
    • F. Wakai

    Papers Pages: 3642 - 3644

31. Preparation of spinel-type ferrite thin films by the dip-coating process and their magnetic properties

    • T. Tsuchiya
    • H. Yamashiro
    • T. Inamura

    Papers Pages: 3645 - 3650

32. Structure and properties of Fe-Fe₂B cermets

    • J. Nowacki
    • L. Klimek

    Papers Pages: 3651 - 3656

33. Rubber-modified polystyrene compositions

    • D. Trifonova
    • S. Vasileva

    Papers Pages: 3657 - 3661

34. Cyclic hardening and softening of Al-2.9% Cu-2.2% Mg-0.6% Mn alloy

    • Y. Ustinovshikov

    Papers Pages: 3662 - 3666

35. Experimental study of quantitative phase characterization in duplex stainless steels by potentiostatic etching

    • J. H. Potgieter
    • L. M. Matthews
    • P. De Visser

    Papers Pages: 3667 - 3679

36. Iron(III) tungstate and its modifications

    • J. Walczak
    • I. Rychiowska-Himmel
    • P. Tabero

    Papers Pages: 3680 - 3684

37. Electrical properties of polycrystalline PTCR barium titanate

    • M. A. A. Issa

    Papers Pages: 3685 - 3692