1. Crack growth simulation for arbitrarily shaped cracks based on the virtual crack closure technique

   • Yan-Ping Liu
   • Guo-Qing Li
   • Chuan-Yao Chen

   Original Paper 01 November 2013 Pages: 1 - 15

2. Proposal for an engineering definition of a fatigue crack initiation unit for evaluating the fatigue limit on the basis of crystallographic analysis of pearlitic steel

   • Tomoya Fujisawa
   • Shigeru Hamada
   • Hiroshi Noguchi

   Original Paper 25 October 2013 Pages: 17 - 29

   

3. Assessment of split-beam-type tests for mode III delamination toughness determination

   • Allison L. Johnston
   • Barry D. Davidson
   • Kiran K. Simon

   Original Paper 02 November 2013 Pages: 31 - 48

   

4. Characterization of crack tip stress fields in test specimens using mode mixity parameters

   • Valery Shlyannikov
   • Andrey Tumanov

   Original Paper 01 November 2013 Pages: 49 - 76

   

5. Irreversible mixed mode interface delamination using a combined damage-plasticity cohesive zone enabling unloading

   • M. Kolluri
   • J. P. M. Hoefnagels
   • M. G. D. Geers

   Original Paper 21 November 2013 Pages: 77 - 95

   

6. Probability density distribution of the orientation of strength-controlling flaws from multiaxial loading using the unit-sphere stochastic strength model for anisotropy

   • Noel N. Nemeth

   Original Paper 30 November 2013 Pages: 97 - 114

   

7. Temperature, moisture and mode-mixity effects on copper leadframe/EMC interfacial fracture toughness

   • Hai T. Tran
   • M. Hossein Shirangi
   • Alex A. Volinsky

   Original Paper 21 November 2013 Pages: 115 - 127

   

8. A modeling approach for the complete ductile–brittle transition region: cohesive zone in combination with a non-local Gurson-model

   • Geralf Hütter
   • Thomas Linse
   • Meinhard Kuna

   Original Paper 10 December 2013 Pages: 129 - 153

   

9. An XFEM model for cracked porous media: effects of fluid flow and heat transfer

   • Qian Shao
   • Lyazid Bouhala
   • Salim Belouettar

   Original Paper 10 December 2013 Pages: 155 - 169

   

10. Evluation of Strength of Plane Microcracked Structural Elements Via Electrical Resistance Scanning

    • Terry W. Armstrong
    • Igor Sevostianov

    Letters in Fracture and Micromechanics 15 October 2013 Pages: 171 - 178

11. Brittle crack-arrest fracture toughness in a high heat-input thick steel weld

    • Gyu Baek An
    • Wanchuck Woo
    • Jeong-Ung Park

    Letters in Fracture and Micromechanics 01 November 2013 Pages: 179 - 185

12. Oil-Gas Transformation Induced Subcritical Crack Propagation and Coalescence in Petroleum Source Rocks

    • Z. Q. Fan
    • Z.-H. Jin
    • S. E. Johnson

    Letters in Fracture and Micromechanics 01 November 2013 Pages: 187 - 194

13. Determination of History of Dynamic Stress Intensity Factor at Low Impact Velocities using Reduced Record of Experimental Forces in Three Point Bend Test

    • R. Balachandran
    • S. K. Maiti

    Letters in Fracture and Micromechanics 20 November 2013 Pages: 195 - 200

14. On Influence of Non-Singular Stress States on Brittle Fracture

    • David Gardeazabal
    • Zhuang He
    • Andrei Kotousov

    Letters in Fracture and Micromechanics 19 November 2013 Pages: 201 - 208

15. Elevated Temperature Fatigue Crack Growth rate model for NI-BASE Superalloys

    • J. L. Evans
    • A. Saxena

    Letters in Fracture and Micromechanics 06 November 2013 Pages: 209 - 216

16. Energy Changes In a Stressed Unbounded Matrix Containing a Inhomogeneity Due to Formation of a Non-perfect Interface

    • M.A. Kattis
    • N. Karalis
    • E. Gkouti

    Letters in Fracture and Micromechanics 26 November 2013 Pages: 217 - 224