1. Editorial

   News 20 January 2023 Pages: 1 - 4

2. Wood modification with phenol urea formaldehyde (PUF) resin: the influence of wood species selection on the dimensional stability

   • Carlo Kupfernagel
   • Morwenna J. Spear
   • Graham A. Ormondroyd

   Original Article Open access 22 October 2022 Pages: 5 - 19

   

3. Understanding the effect of PF glue impregnation on the shear strength of wood growth ring boundary

   • Wanzhao Li
   • Zheng Zhang
   • Joris Van Acker

   Original Article 15 September 2022 Pages: 21 - 31

   

4. Vacuum infusion as a novel method to determine wood permeability

   • Andrey Pereira Acosta
   • Kelvin Techera Barbosa
   • Sandro Campos Amico

   Original Article 17 October 2022 Pages: 33 - 44

   

5. Wood fiber - sodium silicate mixtures for additive manufacturing of composite materials

   • Berlinda O. Orji
   • Conal Thie
   • Armando G. McDonald

   Original Article 02 August 2022 Pages: 45 - 58

   

6. Correction: Wood fiber - sodium silicate mixtures for additive manufacturing of composite materials

   • Berlinda O. Orji
   • Conal Thie
   • Armando G. McDonald

   Correction 16 November 2022 Pages: 59 - 60

   

7. Bark based porous materials obtained with a simple mechanical foaming procedure

   • Maria Busquets Ferrer
   • Axel Solt-Rindler
   • Wolfgang Gindl-Altmutter

   Original Article Open access 08 October 2022 Pages: 61 - 71

   

8. Wettability and surface interactions of natural and thermally modified beech wood with water and water-based coatings: the effect of surface pre-treatment type

   • Jure Žigon
   • Maziar Sedighi Moghaddam
   • Magnus E. P. Wålinder

   Original Article 03 September 2022 Pages: 73 - 88

   

9. Preliminary evaluation of polydimethylsiloxane and hydrophobic silica nanoparticles to improve water repellency and boron leachability in wood

   • Ekim Elçin Soytürk
   • S. Nami Kartal
   • Nusret Celik

   Original Article 20 September 2022 Pages: 89 - 98

   

10. Analysis of the interaction between internal porosity and oriented strand board performance using X-ray computed tomography

    • Biaorong Zhuang
    • Alain Cloutier
    • Ahmed Koubaa

    Original Article 24 September 2022 Pages: 99 - 109

    

11. Elastoplastic performance of wood under compression load considering cross-grain orientation and moisture content

    • Wei-Lian Fu
    • Hui-Yuan Guan
    • Yao Zhao

    Original Article 16 September 2022 Pages: 111 - 124

    

12. A comparison of three wood species (poplar, birch and oak) for crash application

    • R. Guélou
    • F. Eyma
    • B. Castanié

    Original Article 04 August 2022 Pages: 125 - 141

    

13. Surface characterization of wood treated with acidic deep eutectic solvents

    • Ahmet Emre ÇELİK
    • Ahmet CAN

    Original Article 09 August 2022 Pages: 143 - 157

    

14. Discrimination of amazonian forest species by NIR spectroscopy: wood surface effects

    • Thiago Valente Novaes¹
    • Fernanda Maria Guedes Ramalho
    • Paulo Ricardo Gherardi Hein

    Original Article 10 August 2022 Pages: 159 - 172

    

15. Seismic performance investigation of the Dou-gong joints of traditional Chinese timber structures

    • Jixing Cao
    • Xiaoyu Li
    • Dan Yu

    Original Article 04 August 2022 Pages: 173 - 186

    

16. Strain and cracks investigations on tropical green wood slices under natural drying: experimental and numerical approaches

    • Estelle Nkene Mezui
    • Claude Feldman Pambou Nziengui
    • Pierre Kisito Talla

    Original Article 24 September 2022 Pages: 187 - 207

    

17. Possibility of making flexible three-ply plywood using poplar (Populus deltoides) and Paulownia (Paulownia fortunei) veneers

    • Parisa Sedighizadeh
    • Payam Moradpour
    • Hamid Zarea Hosseinabadi

    Original Article 07 September 2022 Pages: 209 - 221

    

18. Modelling the process of splitting wood and chipless cutting Pinus sylvestris L. wood in terms of designing the geometry of the tools and the driving force of the machine

    • Łukasz Warguła
    • Dominik Wojtkowiak
    • Krzysztof Talaśka

    Original Article Open access 26 September 2022 Pages: 223 - 237

    

19. Influence mechanism of tool cutting geometry on chip formation in experimentally simulating wood sanding

    • Jian Zhang
    • Bin Luo
    • Hongguang Liu

    Original Article 13 August 2022 Pages: 239 - 249

    

20. Comparative LCA study of wood and mineral non-residential buildings in Germany and related substitution potential

    • Annette Hafner
    • Özlem Özdemir

    Original Article Open access 30 September 2022 Pages: 251 - 266

    

21. Digitalization of small and medium sized sawmills in Austria: a survey about business processes

    • L. Ranacher
    • R. Stocker
    • F. Hesser

    Original Article Open access 13 September 2022 Pages: 267 - 280

    

22. Accelerated weathering of Compreg with phenol-formaldehyde resin treated top veneers of European white oak (Quercus ssp., L.) and teak (Tectonia grandis, L.F.)

    • Lars Passauer
    • Jürgen Schubert

    Brief Original Open access 07 September 2022 Pages: 281 - 285