1. Comparison of the flexural behavior of natural and thermo-hydro-mechanically densified Moso bamboo

   • P. G. Dixon
   • K. E. Semple
   • L. J. Gibson

   Original 15 April 2016 Pages: 633 - 642

   

2. Anatomical study of short-term thermo-mechanically densified alder wood veneer with low moisture content

   • Pavlo Bekhta
   • Miroslava Mamoňová
   • Igor Novák

   Original 21 March 2016 Pages: 643 - 652

   

3. Wood degradation affected by process conditions during thermal modification of European beech in a high-pressure reactor system

   • Michael Altgen
   • Wim Willems
   • Holger Militz

   Original 15 April 2016 Pages: 653 - 662

   

4. The effects of drying methods on extract of Dalbergia cochinchinensis Pierre

   • Tao Jiang
   • Kaifu Li
   • Lin Yang

   Original 09 April 2016 Pages: 663 - 669

   

5. Influence of orientation and number of layers on the elastic response and failure modes on CLT floors: modeling and parameter studies

   • Lorenzo Franzoni
   • Arthur Lebée
   • Gilles Foret

   Original 07 April 2016 Pages: 671 - 684

   

6. Potential of moderately compressed wood as an elastic component of wooden composites

   • Aoi Hirano
   • Eiichi Obataya
   • Koji Adachi

   Original 19 April 2016 Pages: 685 - 691

   

7. Influences of interior fitting processes on the indoor air quality of two model rooms

   • Eva Höllbacher
   • Thomas Ters
   • Ewald Srebotnik

   Original 22 April 2016 Pages: 693 - 701

   

8. Remedial boron treatment of difficult to access timber in buildings

   • Tripti Singh
   • Ian Simpson
   • Dave Page

   Original 27 May 2016 Pages: 703 - 710

   

9. Utilization of recycled wood in biorefineries: preliminary results of steam explosion and ethanol/water organosolv pulping without a catalyst

   • Boštjan Lesar
   • Miha Humar
   • Tiina Liitiä

   Original 07 June 2016 Pages: 711 - 723

   

10. Three-dimensional modelling of knots and pith location in Norway spruce boards using tracheid-effect scanning

    • Andreas Briggert
    • Anders Olsson
    • Jan Oscarsson

    Original 27 April 2016 Pages: 725 - 739

    

11. Effects of pruning on knotty core taper and form of Pinus radiata and Pinus pinaster

    • Andrea Hevia
    • Juan Gabriel Álvarez-González
    • Juan Majada

    Original 01 March 2016 Pages: 741 - 750

    

12. Erratum to: Effects of pruning on knotty core taper and form of Pinus radiata and Pinus pinaster

    • Andrea Hevia
    • Juan Gabriel Álvarez-González
    • Juan Majada

    Erratum 07 April 2016 Pages: 751 - 752

13. Assessing the potential of wood welding for Australian eucalypts and tropical species

    • Benoit Belleville
    • Barbara Ozarska
    • Antonio Pizzi

    Brief Original 17 June 2016 Pages: 753 - 757

14. Preliminary evaluation of laminated veneer lumber bonded with expanded polystyrene

    • C. H. S. Del Menezzi
    • A. Nakamura
    • M. Couto

    Brief Original 18 March 2016 Pages: 759 - 761

    

15. Surface coating of microcrystalline cellulose with surfactants and paraffin wax

    • Yuanfeng Pan
    • Yi Liu
    • Runcang Sun

    Brief Original 23 March 2016 Pages: 763 - 765

    

16. Physico-chemical and mechanical characterisation of the bark of selected Ficus species growing in Uganda

    • Christine Mwanja
    • Paul Mugabi
    • Abwoli Y. Banana

    Brief Original 21 June 2016 Pages: 767 - 769

    

17. Field investigations of selectively treated bamboo species

    • Perminder Jit Kaur
    • K. K. Pant
    • S. N. Naik

    Brief Original 29 April 2016 Pages: 771 - 773