Volume 68, issue 1, December 2022
65 articles in this issue
-
-
Control of system parameters by estimating screw withdrawal strength values of particleboards using artificial neural network-based statistical control charts
Authors
- Rıfat Kurt
- Content type: Original Article
- Open Access
- Published: 08 December 2022
- Article: 64
-
Lipopolysaccharide from Yoshino cedar trees (Cryptomeria japonica) induces high levels of human macrophage polarization
Authors (first, second and last of 7)
- Noriko Ouji-Sageshima
- Masahiro Kitabatake
- Toshihiro Ito
- Content type: Original Article
- Open Access
- Published: 08 December 2022
- Article: 63
-
Influence of boundary conditions on acoustic emission propagation characteristics of Zelkova schneideriana
Authors (first, second and last of 9)
- Yue Zhao
- Ming Li
- Daigen Zhu
- Content type: Original Article
- Open Access
- Published: 06 December 2022
- Article: 62
-
Multi-objective optimization of particle gluing operating parameters in particleboard production based on improved machine learning algorithms
Authors (first, second and last of 5)
- Beilong Zhang
- Jun Hua
- Yilin Li
- Content type: Original Article
- Open Access
- Published: 28 November 2022
- Article: 61
-
Revisiting the condensation reaction of lignin in alkaline pulping with quantitativity part III: predominant formation of α-β-type over α-5-type condensation product in soda cooking treatments of apocynol and creosol
Authors
- Toshihiro Komatsu
- Tomoya Yokoyama
- Content type: Original Article
- Open Access
- Published: 28 November 2022
- Article: 60
-
Fuel and material utilization of a waste shiitake (Lentinula edodes) mushroom bed derived from hardwood chips II thermal conductivity of compression-dried waste mushroom beds
Authors
- Zhuoqiu Jiang
- Noboru Sekino
- Content type: Original Article
- Open Access
- Published: 21 November 2022
- Article: 59
-
The variability of terpenoids and flavonoids in native Lindera umbellata from the same region
Authors (first, second and last of 5)
- Norihisa Kusumoto
- Takuya Morikawa
- Tatsuro Ohira
- Content type: Original Article
- Open Access
- Published: 21 November 2022
- Article: 58
-
Wood density and microfibril angle from pith to bark of a sugi cultivar (Cryptomeria japonica, Japanese cedar, Tosaaka) grown in a Nelder plot
Authors (first, second and last of 5)
- Yoshio Kijidani
- Taku Tsuyama
- Satoshi Ito
- Content type: Original Article
- Open Access
- Published: 31 October 2022
- Article: 57
-
Examination of Cinnamomum camphora interlocked grain adopting X-ray computed tomography combined with particle image velocimetry
Authors (first, second and last of 4)
- Hairi Cipta
- Kayoko Kobayashi
- Junji Sugiyama
- Content type: Original Article
- Open Access
- Published: 29 October 2022
- Article: 56
-
Effects of the presence or absence and the position of glued edge joints in the lamina on the shear strength of glued laminated timber
Authors (first, second and last of 4)
- Hirofumi Ido
- Atsushi Miyatake
- Kohta Miyamoto
- Content type: Original Article
- Open Access
- Published: 22 September 2022
- Article: 55
-
Structural diversity of natural cellulose and related applications using delignified wood
Authors
- Yoshiki Horikawa
- Content type: Review Article
- Open Access
- Published: 15 September 2022
- Article: 54
-
Elastic interaction in multiple bolted timber joints
Authors
- Doppo Matsubara
- Masaki Teranishi
- Yoshiaki Wakashima
- Content type: Note
- Open Access
- Published: 02 September 2022
- Article: 53
-
Combined analysis of microstructures within an annual ring of Douglas fir (Pseudotsuga menziesii) by dynamic mechanical analysis and small angle X-ray scattering
Authors (first, second and last of 6)
- Hiroaki Horiyama
- Keisuke Kojiro
- Yuzo Furuta
- Content type: Original Article
- Open Access
- Published: 02 September 2022
- Article: 52
-
Demethylation and tannin-like properties of guaiacyl/syringyl-type and syringyl-type dehydrogenation polymers using iodocyclohexane
Authors (first, second and last of 4)
- Tokimitsu Kobayashi
- Yuki Tobimatsu
- Toshiyuki Takano
- Content type: Original Article
- Open Access
- Published: 29 August 2022
- Article: 51
-
Research on the wood processing method of helium-assisted laser process
Authors (first, second and last of 7)
- Chunmei Yang
- Xinchi Tian
- Wenji Yu
- Content type: Original Article
- Open Access
- Published: 27 August 2022
- Article: 50
-
Effect of wood attributes on the price persistence of acoustic guitars
Authors
- Xiaoxiao Zhou
- Ryoga Miyauchi
- Yuki Inoue
- Content type: Original Article
- Open Access
- Published: 23 August 2022
- Article: 49
-
Relationship between the xylem maturation process based on radial variations in wood properties and radial growth increments of stems in a fast-growing tree species, Liriodendron tulipifera
Authors (first, second and last of 4)
- Ikumi Nezu
- Futoshi Ishiguri
- Shinso Yokota
- Content type: Original Article
- Open Access
- Published: 17 August 2022
- Article: 48
-
The effects of watering on cambial activity in the stems of evergreen hardwood (Samanea saman) during the pre-monsoon season in subtropical Bangladesh
Authors (first, second and last of 5)
- Md Hasnat Rahman
- Shahanara Begum
- Ryo Funada
- Content type: Original Article
- Open Access
- Published: 12 August 2022
- Article: 47
-
Composition analysis of exudates produced by conifers grown in Taiwan and their antifungal activity
Authors (first, second and last of 5)
- Nai-Wen Tsao
- Yen-Chi Lin
- Sheng-Yang Wang
- Content type: Original Article
- Open Access
- Published: 12 August 2022
- Article: 46
-
Synthesis of highly deuterated coniferyl alcohol for silencing of NMR signals in the resulting dehydrogenative polymer
Authors
- Kengo Shigetomi
- Mana Tokizawa
- Yasumitsu Uraki
- Content type: Original Article
- Open Access
- Published: 12 August 2022
- Article: 45
-
Experimental study on the embedment strength of smooth dowels inserted in cross-laminated timber narrow side
Authors (first, second and last of 6)
- Weiguo Long
- Jiajia Ou
- Zheng Li
- Content type: Original Article
- Open Access
- Published: 05 August 2022
- Article: 44
-
Interaction between particle size and mixing ratio on porosity and properties of tea oil camellia (Camellia oleifera Abel.) shells-based particleboard
Authors (first, second and last of 4)
- Kamran Choupani Chaydarreh
- Xiuyi Lin
- Chuanshuang Hu
- Content type: Original Article
- Open Access
- Published: 23 July 2022
- Article: 43
-
Comparison of the elastic limit and yield load of nailed joints connecting solid wood and wood-based board material
Authors
- Naoki Watanabe
- Keita Ogawa
- Kenji Kobayashi
- Content type: Original Article
- Open Access
- Published: 16 July 2022
- Article: 42
-
Experimental and nonlinear finite-element analysis study on lateral push resistance of San-dou components perpendicular and parallel to grain in traditional timber buildings
Authors (first, second and last of 5)
- Chengwen Zhang
- Qing Chun
- Pan Li
- Content type: Original Article
- Open Access
- Published: 11 July 2022
- Article: 41
-
Effect of layups on the mechanical properties of overlaid laminated bamboo lumber made of radial bamboo slices
Authors (first, second and last of 4)
- Xin Guan
- Haining Yin
- Weihui Zhan
- Content type: Original Article
- Open Access
- Published: 02 July 2022
- Article: 40
-
Application of a bending vibration method without weighing specimens to the practical wooden members conditions
Authors
- Yoshitaka Kubojima
- Satomi Sonoda
- Hideo Kato
- Content type: Original Article
- Open Access
- Published: 28 June 2022
- Article: 39
-
Similarity network fusion for aggregating headspace GC–MS and direct analysis in real time–mass spectrometry data from solid samples to enhance species identification efficiency of high–temperature heated wood
Authors (first, second and last of 6)
- Maomao Zhang
- Juan Guo
- Yafang Yin
- Content type: Original Article
- Open Access
- Published: 21 June 2022
- Article: 38
-
Mechanical properties of hybrid joints in timber structures
Authors (first, second and last of 6)
- Kosuke Imakawa
- Yo Ochiai
- Tetsuo Yamaguchi
- Content type: Original Article
- Open Access
- Published: 18 June 2022
- Article: 37
-
Study on in-plane shear failure mode of cross-laminated timber panel
Authors (first, second and last of 5)
- Yuhao Zhou
- Zhaoyu Shen
- Zheng Wang
- Content type: Original Article
- Open Access
- Published: 18 June 2022
- Article: 36
-
A pilot study examining the suitability of the mental arithmetic task and single-item measures of affective states to assess affective, physiological, and attention restoration at a wooden desk
Authors
- Dean Lipovac
- Jure Žitnik
- Michael D. Burnard
- Content type: Original Article
- Open Access
- Published: 15 June 2022
- Article: 35
-
Improving durability of cross laminated timber (CLT) with borate treatment
Authors (first, second and last of 6)
- Sajad Bagheri
- Mona Alinejad
- Mojgan Nejad
- Content type: Original Article
- Open Access
- Published: 11 June 2022
- Article: 34
-
Experimental study of compressive properties parallel to grain of glulam
Authors (first, second and last of 5)
- Marina Totsuka
- Robert Jockwer
- Masahiro Inayama
- Content type: Original Article
- Open Access
- Published: 11 June 2022
- Article: 33
-
Evaluation of elastic stiffness in bolted timber joints for applying turn-of-nut method
Authors
- Doppo Matsubara
- Masaki Teranishi
- Content type: Note
- Open Access
- Published: 07 June 2022
- Article: 32
-
Porosity analysis of three types of balsa (Ochroma pyramidale) wood depending on density
Authors
- Eun-Suk Jang
- Chun-Won Kang
- Content type: Note
- Open Access
- Published: 26 May 2022
- Article: 31
-
Preparation and properties of jute stick particleboard using citric acid–glycerol mixture as a natural binder
Authors (first, second and last of 5)
- Ireen Parvin Nitu
- Summia Rahman
- Md. Iftekhar Shams
- Content type: Original Article
- Open Access
- Published: 24 May 2022
- Article: 30
-
Preparation of carbon nanoparticles from activated carbon by aqueous counter collision
Authors
- Liwei Yu
- Daisuke Tatsumi
- Tetsuo Kondo
- Content type: Original Article
- Open Access
- Published: 19 May 2022
- Article: 29
-
Studies on pre-treatment by compression for wood impregnation III: effects of the solid content of low-molecular-weight phenol formaldehyde resin on the impregnation
Authors
- Huifang Wang
- Youke Zhao
- Content type: Original Article
- Open Access
- Published: 13 May 2022
- Article: 28
-
Marker-free genome editing in the edible mushroom, Pleurotus ostreatus, using transient expression of genes required for CRISPR/Cas9 and for selection
Authors (first, second and last of 10)
- Daishiro Koshi
- Hiroki Ueshima
- Yoichi Honda
- Content type: Original Article
- Open Access
- Published: 12 May 2022
- Article: 27
-
Estimation of carbon stocks in harvested wood products of buildings in Japan: flux-data method and direct inventory method
Authors
- Ryoto Matsumoto
- Chihiro Kayo
- Content type: Original Article
- Open Access
- Published: 09 May 2022
- Article: 26
-
Effect of temperature on color changes and mechanical properties of poplar/bismuth oxide wood alloy during warm-press forming
Authors (first, second and last of 5)
- Jin Yan
- Liqiang Zhang
- Jianan Liu
- Content type: Original Article
- Open Access
- Published: 03 May 2022
- Article: 25
-
Radial variations of broad-sense heritability in wood properties and classification of load–deflection curves in static bending for six half-sib families of Chamaecyparis obtusa
Authors (first, second and last of 9)
- Yusuke Takahashi
- Futoshi Ishiguri
- Shinso Yokota
- Content type: Original Article
- Open Access
- Published: 28 April 2022
- Article: 24
-
Possibility of using the tips obtained from the “Uradome” of moso bamboo (Phyllostachys pubescens) as a food source
Authors
- Yuka Furusawa
- Hisayoshi Kofujita
- Tatsuya Ashitani
- Content type: Note
- Open Access
- Published: 18 April 2022
- Article: 23
-
Microwave complex permittivity and anisotropy of conifer wood chips vs moisture content: experiments and modeling
Authors
- D. Rönnow
- P. Ottosson
- D. Andersson
- Content type: Original Article
- Open Access
- Published: 14 April 2022
- Article: 22
-
Optimization of production parameters of particle gluing on internal bonding strength of particleboards using machine learning technology
Authors (first, second and last of 5)
- Beilong Zhang
- Jun Hua
- Yilin Li
- Content type: Original Article
- Open Access
- Published: 09 April 2022
- Article: 21
-
Densification of timber: a review on the process, material properties, and application
Authors (first, second and last of 5)
- John Paul Cabral
- Bidur Kafle
- Mahmud Ashraf
- Content type: Review Article
- Open Access
- Published: 30 March 2022
- Article: 20
-
Sequent periderm formation and changes in the cellular contents of phloem parenchyma during rhytidome development in Cryptomeria japonica
Authors (first, second and last of 7)
- Megumi Ohse
- Rika Irohara
- Satoshi Nakaba
- Content type: Original Article
- Open Access
- Published: 27 March 2022
- Article: 19
-
Minor cutting edge force contribution in wood bandsawing
Authors (first, second and last of 4)
- Vanessa Meulenberg
- Mats Ekevad
- Olof Broman
- Content type: Original Article
- Open Access
- Published: 19 March 2022
- Article: 18
-
Spatial distribution characteristics of the dust emitted at different cutting speeds during MDF milling by image analysis
Authors (first, second and last of 6)
- Yunqi Cui
- Jian Yin
- Tao Ding
- Content type: Original Article
- Open Access
- Published: 17 March 2022
- Article: 17
-
Cellular-level in planta analysis of radial movement of minerals in a konara oak (Quercus serrata Murray) trunk
Authors
- Katsushi Kuroda
- Kenichi Yamane
- Yuko Itoh
- Content type: Original Article
- Open Access
- Published: 14 March 2022
- Article: 16