The effect of moisture on the properties of cement-bonded particleboards made with non-traditional raw materials
Authors (first, second and last of 5)
Volume 67, issue 1, December 2021
75 articles in this issue
-
-
The effects of cellulose nanofibers compounded in water-based undercoat paint on the discoloration and deterioration of painted wood products
Authors (first, second and last of 9)
-
Experimental study on flexural properties of timber columns with interior notches in traditional Japanese timber structures
Authors (first, second and last of 6)
-
Influence of juvenile and mature wood on anatomical and chemical properties of early and late wood from Chinese fir plantation
Authors (first, second and last of 8)
-
Experimental investigations into the mechanical performance of glulam dowel-type connections with either bolts or screws as fasteners
Authors (first, second and last of 5)
-
Effects of decay on the shear properties of nailed joints parallel and perpendicular to the grain
Authors (first, second and last of 4)
-
Experimental and numerical study on the screw connection strength of bamboo-oriented strand board compared with wood-oriented strand board
Authors (first, second and last of 9)
-
Correction to: Influence of soil properties on the heartwood colour of Juglans mandshurica var. sachalinensis in a cool temperate forest
Authors (first, second and last of 7)
-
-
The mechanical properties and thermal conductivity of bamboo with freeze–thaw treatment
Authors (first, second and last of 6)
-
Long-term bending properties of cross-laminated timber made from Japanese larch under constant environment
Authors (first, second and last of 4)
-
-
-
Decay detection of constructional softwoods using machine olfaction
Authors (first, second and last of 5)
-
Modeling of radial variations of wood properties in naturally regenerated trees of Betula platyphylla grown in Selenge, Mongolia
Authors (first, second and last of 8)
-
Comparative studies on the mechanical properties and microstructures of outerwood and corewood in Pinus radiata D. Don
Authors (first, second and last of 5)
-
Classification of acoustic emission signals in wood damage and fracture process based on empirical mode decomposition, discrete wavelet transform methods, and selected features
Authors (first, second and last of 5)
-
The one-step pyrolysis process of rattan-based silicon carbide multiphase ceramics prepared by sol–gel method
Authors (first, second and last of 7)
-
Experimental study and comparative numerical modeling of creep behavior of white oak wood with various distributions of earlywood vessel belt
Authors (first, second and last of 7)
-
Comparison of colors, microstructure, chemical composition and thermal properties of bamboo fibers and parenchyma cells with heat treatment
Authors (first, second and last of 6)
-
Iodine value of tung biodiesel fuel using Wijs method is significantly lower than calculated value
Authors (first, second and last of 4)
-
-
-
Anti-inflammatory effect of essential oil extracted from Pinus densiflora (Sieb. et Zucc.) wood on RBL-2H3 cells
Authors (first, second and last of 5)
-
-
-
Influence of soil properties on the heartwood colour of Juglans mandshurica var. sachalinensis in a cool temperate forest
Authors (first, second and last of 7)
-
Study on flexural performance of prestressed glulam continuous beams under control influence
Authors (first, second and last of 5)
-
Verification of the shear performance of mortise and tenon joints with top and bottom notches at the beam end
Authors (first, second and last of 5)
-
-
-
Comparison of natural durability of wood by stake tests followed by survival analysis
Authors (first, second and last of 7)
-
Sandwich compression of sugi (Cryptomeria japonica) and hinoki (Chamaecyparis obtusa) wood: density distribution, surface hardness and their controllability
Authors (first, second and last of 4)
-
Effect of face-layer moisture content and face–core–face ratio of mats on the temperature and vapor pressure behavior during hot-pressing of wood-based panel manufacturing
Authors (first, second and last of 6)
-
Nonlinear finite-element analysis of embedment behavior of metal washer in bolted timber joints
Authors (first, second and last of 5)
-
-
Experimental study on partial compression parallel to grain of solid timber
Authors (first, second and last of 4)
-
Assessing the impacts of cell wall composition on the optimum stage for “Uradome” in moso bamboo
Authors
-
Influence of moisture content on NO2 sorption ability of cedar wood
Authors (first, second and last of 4)
-
Influence of slenderness ratio and sectional geometry on the axial compression behavior of original bamboo columns
Authors (first, second and last of 5)
-
-
Lateral resistance of mass timber shear wall connected by withdrawal-type connectors
Authors (first, second and last of 4)
-
Estimation of the perpendicular-to-the-grain tensile strength of Scots pine glued laminated timber via three-point bending tests
Authors (first, second and last of 5)
-
Thermal degradation of hemicellulose and cellulose in ball-milled cedar and beech wood
Authors (first, second and last of 4)
-
Normal contact performance of mortise and tenon joint: theoretical analysis and numerical simulation
Authors (first, second and last of 5)
-
-
-
Effects of microwave irradiation on the moisture content of various wood chip fractions obtained from different tree species
Authors (first, second and last of 4)
-
-
The effect of oil heat treatment on biological, mechanical and physical properties of bamboo
Authors (first, second and last of 8)
