Volume 50, issue 1, February 2004

16 articles in this issue

Heart splitting at crosscutting of eucalypt logs

Authors (first, second and last of 4)
- Takashi Okuyama
- Javier Doldán
- Toshihiro Ona
- Content type: ORIGINAL ARTICLE
- Pages: 1 - 6
In situ measurement of wood moisture content in high-temperature steam

Authors
- Atsuko Ishikawa
- Naohiro Kuroda
- Atsushi Kato
- Content type: ORIGINAL ARTICLE
- Pages: 7 - 14
Method to estimate the internal stresses due to moisture in wood using transmission properties of microwaves

Authors
- Tomio Takemura
- Takashi Taniguchi
- Content type: ORIGINAL ARTICLE
- Pages: 15 - 21
Evaluation of surface smoothness by a laser displacement sensor II: comparison of lateral effect photodiode and multielement array

Authors
- Jakub Sandak
- Chiaki Tanaka
- Tadashi Ohtani
- Content type: ORIGINAL ARTICLE
- Pages: 22 - 27
Orthogonal cutting mechanics of maple: modeling a solid wood-cutting process

Authors (first, second and last of 5)
- Jean-Philippe Costes
- Pak Lim Ko
- Yusuf Altintas
- Content type: ORIGINAL ARTICLE
- Pages: 28 - 34
Assessment of wood surface roughness: comparison of tactile roughness and three-dimensional parameters derived using a robust Gaussian regression filter

Authors (first, second and last of 4)
- Yuko Fujiwara
- Yoshihisa Fujii
- Shogo Okumura
- Content type: ORIGINAL ARTICLE
- Pages: 35 - 40
Method to compute fiber directions in wood from computed tomography images

Authors
- Mats Ekevad
- Content type: ORIGINAL ARTICLE
- Pages: 41 - 46
Acoustoelastic birefringence effect in wood I: effect of applied stresses on the velocities of ultrasonic shear waves propagating transversely to the stress direction

Authors
- Masumi Hasegawa
- Yasutoshi Sasaki
- Content type: ORIGINAL ARTICLE
- Pages: 47 - 52
Manufacture and mechanical properties of binderless boards from kenaf core

Authors
- Nobuhisa Okuda
- Masatoshi Sato
- Content type: ORIGINAL ARTICLE
- Pages: 53 - 61
Manufacture and properties of low-density binderless particleboard from kenaf core

Authors (first, second and last of 5)
- Jianying Xu
- Ryo Sugawara
- Shuichi Kawai
- Content type: ORIGINAL ARTICLE
- Pages: 62 - 67
Condensation reactions of phenolic resins IV: self-condensation of 2,4-dihydroxymethylphenol and 2,4,6-trihydroxymethylphenol (2)

Authors (first, second and last of 4)
- Naruyuki Kamo
- Mitsuo Higuchi
- Mitsuhiro Morita
- Content type: ORIGINAL ARTICLE
- Pages: 68 - 76
Stereochemistry of matairesinol formation by Daphne secoisolariciresinol dehydrogenase

Authors (first, second and last of 5)
- Tomoya Okunishi
- Norikazu Sakakibara
- Mikio Shimada
- Content type: ORIGINAL ARTICLE
- Pages: 77 - 81
Studies on the immunolabeling of heartwood extractives: characterization of anti-agatharesinol antiserum

Authors (first, second and last of 6)
- Takeshi Nagasaki
- Norihisa Osada
- Takanori Imai
- Content type: ORIGINAL ARTICLE
- Pages: 82 - 86
Cone structure of hexagonal carbon sheets stacked in wood cell lumen

Authors
- Yukie Saito
- Takanori Arima
- Content type: ORIGINAL ARTICLE
- Pages: 87 - 92
Semi-micro chiral HPLC analysis of lignans

Authors
- Tomoya Okunishi
- Toshiaki Umezawa
- Mikio Shimada
- Content type: NOTE
- Pages: 93 - 96
Relationship between piezoelectric behavior and the stress – strain curve of wood under combined compression and vibration stresses

Authors
- Takahisa Nakai
- Masatoshi Hamatake
- Tetsuya Nakao
- Content type: RAPID COMMUNICATION
- Pages: 97 - 99

Volume 50, issue 1, February 2004

Heart splitting at crosscutting of eucalypt logs

In situ measurement of wood moisture content in high-temperature steam

Method to estimate the internal stresses due to moisture in wood using transmission properties of microwaves

Evaluation of surface smoothness by a laser displacement sensor II: comparison of lateral effect photodiode and multielement array

Orthogonal cutting mechanics of maple: modeling a solid wood-cutting process

Assessment of wood surface roughness: comparison of tactile roughness and three-dimensional parameters derived using a robust Gaussian regression filter

Method to compute fiber directions in wood from computed tomography images

Acoustoelastic birefringence effect in wood I: effect of applied stresses on the velocities of ultrasonic shear waves propagating transversely to the stress direction

Manufacture and mechanical properties of binderless boards from kenaf core

Manufacture and properties of low-density binderless particleboard from kenaf core

Condensation reactions of phenolic resins IV: self-condensation of 2,4-dihydroxymethylphenol and 2,4,6-trihydroxymethylphenol (2)

Stereochemistry of matairesinol formation by Daphne secoisolariciresinol dehydrogenase

Studies on the immunolabeling of heartwood extractives: characterization of anti-agatharesinol antiserum

Cone structure of hexagonal carbon sheets stacked in wood cell lumen

Semi-micro chiral HPLC analysis of lignans

Relationship between piezoelectric behavior and the stress – strain curve of wood under combined compression and vibration stresses

For authors

Explore

Navigation

Volume 50, issue 1, February 2004

Authors (first, second and last of 4)

Authors

Authors

Authors

Authors (first, second and last of 5)

Authors (first, second and last of 4)

Authors

Authors

Authors

Authors (first, second and last of 5)

Authors (first, second and last of 4)

Authors (first, second and last of 5)

Authors (first, second and last of 6)

Authors

Authors

Authors

For authors

Explore

Search

Navigation