Volume 27, issue 1, January 2014

25 articles in this issue

Review of electronic speckle pattern interferometry (ESPI) for three dimensional displacement measurement

Authors (first, second and last of 5)
- Lianxiang Yang
- Xin Xie
- Yonghong Wang
- Content type: ReviewPaper
- Published: 04 February 2014
- Pages: 1 - 13
Self-calibration and compensation of setting errors for surface profile measurement of a microstructured roll workpiece

Authors (first, second and last of 5)
- Wei Gao
- Bin Xu
- So Ito
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 14 - 22
Frequency analysis of multiple layered cylindrical shells under lateral pressure with asymmetric boundary conditions

Authors
- Mohammad Reza Isvandzibaei
- Hishamuddin Jamaluddin
- Raja Ishak Raja Hamzah
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 23 - 31
Mathematical model and experiment validation of fluid torque by shear stress under influence of fluid temperature in hydro-viscous clutch

Authors (first, second and last of 5)
- Hongwei Cui
- Shouwen Yao
- Qian Liu
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 32 - 40
Numerical analysis of rolling-sliding contact with the frictional heat in rail

Authors (first, second and last of 4)
- Wei Li
- Zefeng Wen
- Lei Wu
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 41 - 49
Characteristic verification and parameter optimization of airbags cushion system for airborne vehicle

Authors (first, second and last of 6)
- Hongyan Wang
- Huangjie Hong
- Jianyang Li
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 50 - 57
Synthetical efficiency-based optimization for the power distribution of power-split hybrid electric vehicles

Authors (first, second and last of 5)
- Weida Wang
- Lijin Han
- Hui Liu
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 58 - 68
Metal-ceramic bond mechanism of the Co-Cr alloy denture with original rough surface produced by selective laser melting

Authors (first, second and last of 6)
- Sheng Zhang
- Yong Li
- Yusheng Shi
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 69 - 78
Dynamic reliability sensitivity of cemented carbide cutting tool

Authors (first, second and last of 4)
- Xingang Wang
- Yimin Zhang
- Chunmei Lü
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 79 - 85
Application of self-inhaling internal cooling wheel in vertical surface grinding

Authors
- Xun Li
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 86 - 91
Stabilized multi-domain simulation algorithms and their application in simulation platform for forging manipulator

Authors (first, second and last of 4)
- Shunzhou Huang
- Yong Zhao
- Zhongqin Lin
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 92 - 102
Effects of chip geometries on dielectrophoresis and electrorotation investigation

Authors (first, second and last of 5)
- Yukun Ren
- Hongchi Wu
- Hongyuan Jiang
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 103 - 110
Real-time synchronization method based on dual ring fieldbus in CNC system

Authors (first, second and last of 6)
- Lei Yang
- Hu Lin
- Feng Wang
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 111 - 121
Pseudo-rigid-body model for corrugated cantilever beam used in compliant mechanisms

Authors
- Nianfeng Wang
- Xiaohe Liang
- Xianmin Zhang
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 122 - 129
Geometric condition of 3UPS-S parallel mechanism in singular configuration

Authors
- Xianguo Han
- Yanlong Liu
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 130 - 137
Energy efficiency analysis of quadruped robot with trot gait and combined cycloid foot trajectory

Authors (first, second and last of 5)
- Jingtao Lei
- Feng Wang
- Peijiang Yuan
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 138 - 145
Design of compliant straight-line mechanisms using flexural joints

Authors (first, second and last of 4)
- Xu Pei
- Jingjun Yu
- Shusheng Bi
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 146 - 153
Design and experiment of ϕ-type-knots knotters on Chinese small square balers

Authors (first, second and last of 7)
- Hui Li
- Jin He
- Xiangcai Zhang
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 154 - 164
Experimental study of cavitation phenomenon in a centrifugal blood pump induced by the failure of inlet cannula

Authors (first, second and last of 4)
- Zhe Lin
- Xiaodong Ruan
- Xin Fu
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 165 - 170
Influence of blade wrap angle on centrifugal pump performance by numerical and experimental study

Authors (first, second and last of 5)
- Lei Tan
- Baoshan Zhu
- Yuming Wang
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 171 - 177
Computational analysis of centrifugal pump delivering solid-liquid two-phase flow during startup period

Authors (first, second and last of 4)
- Yuliang Zhang
- Yi Li
- Baoling Cui
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 178 - 185
Output waveform analysis of an electro-hydraulic vibrator controlled by the multiple valves

Authors
- Yan Ren
- Jian Ruan
- Wen’ang Jia
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 186 - 197
Breakup of cavitation bubbles within the diesel droplet

Authors (first, second and last of 6)
- Ming Lü
- Zhi Ning
- Chunhua Sun
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 198 - 204
Time-dependent vibration frequency reliability analysis of blade vibration of compressor wheel of turbocharger for vehicle application

Authors (first, second and last of 4)
- Zheng Wang
- Zengquan Wang
- A-na Wang
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 205 - 210
Three-dimensional modeling for predicting the vibration modes of twin ball screw driving table

Authors (first, second and last of 4)
- Renche Wang
- Tong Zhao
- Yan Liu
- Content type: OriginalPaper
- Published: 04 February 2014
- Pages: 211 - 218

Volume 27, issue 1, January 2014

Review of electronic speckle pattern interferometry (ESPI) for three dimensional displacement measurement

Self-calibration and compensation of setting errors for surface profile measurement of a microstructured roll workpiece

Frequency analysis of multiple layered cylindrical shells under lateral pressure with asymmetric boundary conditions

Mathematical model and experiment validation of fluid torque by shear stress under influence of fluid temperature in hydro-viscous clutch

Numerical analysis of rolling-sliding contact with the frictional heat in rail

Characteristic verification and parameter optimization of airbags cushion system for airborne vehicle

Synthetical efficiency-based optimization for the power distribution of power-split hybrid electric vehicles

Metal-ceramic bond mechanism of the Co-Cr alloy denture with original rough surface produced by selective laser melting

Dynamic reliability sensitivity of cemented carbide cutting tool

Application of self-inhaling internal cooling wheel in vertical surface grinding

Stabilized multi-domain simulation algorithms and their application in simulation platform for forging manipulator

Effects of chip geometries on dielectrophoresis and electrorotation investigation

Real-time synchronization method based on dual ring fieldbus in CNC system

Pseudo-rigid-body model for corrugated cantilever beam used in compliant mechanisms

Geometric condition of 3UPS-S parallel mechanism in singular configuration

Energy efficiency analysis of quadruped robot with trot gait and combined cycloid foot trajectory

Design of compliant straight-line mechanisms using flexural joints

Design and experiment of ϕ-type-knots knotters on Chinese small square balers

Experimental study of cavitation phenomenon in a centrifugal blood pump induced by the failure of inlet cannula

Influence of blade wrap angle on centrifugal pump performance by numerical and experimental study

Computational analysis of centrifugal pump delivering solid-liquid two-phase flow during startup period

Output waveform analysis of an electro-hydraulic vibrator controlled by the multiple valves

Breakup of cavitation bubbles within the diesel droplet

Time-dependent vibration frequency reliability analysis of blade vibration of compressor wheel of turbocharger for vehicle application

Three-dimensional modeling for predicting the vibration modes of twin ball screw driving table

For authors

Explore

Navigation

Volume 27, issue 1, January 2014

Authors (first, second and last of 5)

Authors (first, second and last of 5)

Authors

Authors (first, second and last of 5)

Authors (first, second and last of 4)

Authors (first, second and last of 6)

Authors (first, second and last of 5)

Authors (first, second and last of 6)

Authors (first, second and last of 4)

Authors

Authors (first, second and last of 4)

Authors (first, second and last of 5)

Authors (first, second and last of 6)

Authors

Authors

Authors (first, second and last of 5)

Authors (first, second and last of 4)

Authors (first, second and last of 7)

Authors (first, second and last of 4)

Authors (first, second and last of 5)

Authors (first, second and last of 4)

Authors

Authors (first, second and last of 6)

Authors (first, second and last of 4)

Authors (first, second and last of 4)

For authors

Explore

Search

Navigation