Abstract
Plasma powder surfacing is improved if it is followed by high-temperature hammer impact on the coating. The structure and physicomechanical properties of a 65Kh25G13N3 alloy coating on 76Φ rail steel are assessed. This technology for the application of a wear-resistant coating on carbon steel may prove useful in the production and restoration of railroad switches.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Lysyuk, V.S., Prichiny i mekhanizmy skhoda kolesa s rel’sa. Problema iznosa koles i rel’sov (Why Wheels Separate from the Rails: Problems of Wheel and Rail Wear), Moscow: Transport, 2002, 2nd ed.
Luzhnov, Yu.M., Stseplenie koles s rel’sami (priroda i zakonomernosti) (Wheel-Rail Adhesion: A Detailed Study), Moscow: Intekst, 2003.
Bogdanov, V.M., Reducing the wear rate of the wheel crest and lateral rail wear, Zheleznodorozhn. Transp., 1992, no. 12, pp. 30–34.
Isakaev, E.Kh., Mordynskii, V.B., Pen’kova, G.I., et al., Influence of stress concentrators on the strength of rail steel, Tekhnol. Mashinostr., 2012, no. 3, pp. 5–8.
Isakaev, E.Kh., Il’ichev, M.V., Tyuftyaev, A.S., and Filippov, G.A., Formation of structure and properties in the plasma treatment of carbon steel, Materialovedenie, 2003, no. 2, pp. 52–55.
Isakaev, E.Kh., Mordynskii, V.B., Tyuftyaev, A.S., et al., Plasma powder surfacing of Hatfield steel with impact treatment, Svar. Proizv., 2013, no. 2, pp. 42–48.
Isakaev, E.Kh., Il’yachev, M.V., Tyuftyaev, A.S., et al., Improving the wear resistance of 110Г13Л steel by plasma surfacing, Stal’, 2007, no. 12, pp. 70–74.
Tekhnologiya elektricheskoi svarki metallov i splavov plavleniem (Electrical Welding of Metals and Alloys by Melting), Paton, B.E., Ed., Moscow: Mashinostroenie, 1974.
Makarov, E.L., Kholodnye treshchiny pri svarke legirovannykh stalei (Cold Cracking in the Welding of Alloy Steel), Moscow: Mashinostroenie, 1981.
Pozdnyakov, V.D., Kir’yakov, V.M., Gaivoronskii, A.A., et al., Properties of weld joints in rail steel with arc welding, Avtomat. Svarka, 2010, no. 8, pp. 19–24.
Sarrak, V.I. and Filippov, G.A., Delayed failure of quenched steel, Mekhan. Term. Obrab. Mater., 1976, no. 12, pp. 36–41.
Prokhorov, N.N., Fizicheskie protsessy v metallakh pri svarke. T. 2. Vnutrennie napryazheniya, deformatsii i fazovye prevrashcheniya (Physical Processes in Metals on Welding, Vol. 2: Internal Stress, Deformation, and Phase Transitions), Moscow: Metallurgiya, 1970.
Kurdyumov, G.V., Maksimova, O.P., and Nikanorova, A.I., Activating influence of plastic deformation on martensitic transformation, Dokl. Akad. Nauk SSSR, 1957, vol. 114, no. 4, pp. 768–771.
Blanter, M.E. and Mashkov, A.K., Anomalous change in alloy properties on phase transformation, Mekhan. Term. Obrab. Mater., 1959, no. 1, pp. 17–22.
Belov, V.V. and Shorshorov, M.Kh., Reduction in the resistance to plastic deformation in polymorphic transformations of high-strength steel and titanium alloys under stress, Fiz. Khim. Obrab. Mater., 1969, no. 3, pp. 47–53.
Author information
Authors and Affiliations
Additional information
Original Russian Text © A.S. Tyuftyaev, 2013, published in “Stal’,” 2013, No. 7, pp. 84–88.
About this article
Cite this article
Tyuftyaev, A.S. Structure and properties of 76Φ steel in plasma powder surfacing. Steel Transl. 43, 460–464 (2013). https://doi.org/10.3103/S0967091213070139
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091213070139