Abstract
Experimental data on convective heat transfer in smooth-tube bundles streamlined by a transverse flow in the range of Reynolds numbers from 3 × 103 to 1 × 105 are generalized. A universal relation is obtained that allows heat transfer in bundles with staggered and in-line arrangements to be calculated in the range of pitch characteristics covering all practical applications with better accuracy as compared with the well-known calculation procedures.
Similar content being viewed by others
References
Thermal Design of Boilers (a Standard Method), an extended and revised 3rd ed. (NPO TsKTI, St. Petersburg, 1998) [in Russian].
A. A. Zhukauskas and R. V. Ulinskas, Heat Transfer in Transversely Streamlined Tube Bundles (Mokslas, Vilnius, 1986) [in Russian].
V. K. Migai and E. V. Firsova, Heat Transfer and Pressure Drop in Tube Bundles (Nauka, Leningrad, 1986) [in Russian].
N. V. Kuznetsov, Working Processes in the Convective Surfaces of Boiler Units and Improvement of Their Design (Gosenergoizdat, Moscow, Leningrad, 1958) [in Russian].
E. N. Pis’mennyi and V. M. Legkii, “Calculation of Heat Transfer in Multirow Staggered Tube Bundles with Transverse Annular Finning,” Teploenergetika, No. 6, 62–65 (1984) [Therm. Eng., No. 6 (1984).
E. N. Pis’mennyi and A. M. Terekh, “A Generalized Method for Calculating Convective Heat Transfer with Cross Flow over Tube Banks Having External Annular and Coil-Tape Finning,” Teploenergetika, No. 5, 52–56 (1993) [Therm. Eng., No. 5 (1993)].
E. N. Pis’mennyi, Heat Transfer and Aerodynamics in Packs of Transversely Finned Tubes (Al’terpress, Kiev, 2004) [in Russian].
E. N. Pis’mennyi, Calculation of Convective Transversely Finned Heating Surfaces (Al’terpress, Kiev, 2003) [in Russian].
RTM (Technical Guidelines) 108.030.140-87: Calculation of and Recommendations for Designing Transversely Finned Convective Heating Surfaces of Stationary Boilers (Minenergomash, Moscow, 1988) [in Russian].
E. N. Pis’mennyi, “Specific Features of Flow and Heat Transfer in Staggered Bundles of Transversely Finned Tubes,” Inzh. Fiz. Zh. 60(6), 895–902 (1991).
E. N. Pismennyi, “A Study of Flow on the Fin Surface of Transversely Finned Tubes,” Inzh. Fiz. Zh. 47(1), 28–34 (1984).
E. N. Pis’mennyi and A. M. Terekh, “Local Heat Transfer in Banks of Transversely Finned Tubes,” Prom. Teplotekhn. 15(3), 45–55 (1993).
V. M. Antuf’ev and G. S. Beletskii, Heat Transfer and Pressure Drop in Tubular Surfaces Placed in Cross Flow (Mashgiz, Perm, 1948) [in Russian].
A. I. Gram, C. O. Mackey, and E. S. Manrol, “Convection Heat Transfer and Pressure Drop of Air Flowing across In-Line Tube Banks,” Trans. ASME 80(1), 583–594 (1958).
N. V. Kuznetsov and E. S. Karasina, “Formulas for the Coefficient of Heat Transfer in Transversely Streamlined Smooth Tube Bundles, Teploenergetika, No. 6, 31–35 (1954).
V. P. Isachenko, “Heat Transfer in Tube Bundles Transversely Streamlined by Different Fluids,” in Heat Transfer and Thermal Modeling (Akad. Nauk SSSR, Moscow, 1959), pp. 213–225.
O. L. Pierson, “Experimental Investigation of Tube Arrangement on Convection Heat Transfer and Flow Resistance in Cross Flow of Gases over Tube Banks,” Trans. ASME 59(7), 563–572 (1937).
V. M. Case and A. L. London, Compact Heat Exchangers (Energiya, Moscow, 1967) [in Russian].
V. K. Migai, “Calculation of Heat Transfer in Transversely Streamlined Staggered Tube Bundles,” Teploenergetika, No. 2, 31–34 (1978) [Therm. Eng., No. 2 (1978)].
V. I. Tolubinskii and V. M. Legkii, “Heat Transfer in Compact Staggered Tube Bundles Placed in Cross Flow,” Teploenergetika, No. 3, 53–56 (1961).
S. I. Mochan, O. G. Revzina, V. A. Lokshin, and A. Ya. Antonov, “Convective Heat Transfer in Transversely Streamlined Clean Smoot-Tube Bundles,” in Trudy TsKTI (TsKTI, 1968), issue 82, pp. 68–97.
Author information
Authors and Affiliations
Additional information
Original Russian Text © E.N. Pis’mennyi, 2010, published in Teploenergetika.
Rights and permissions
About this article
Cite this article
Pis’mennyi, E.N. A universal relation for calculating convective heat transfer in transversely streamlined bundles of smooth tubes. Therm. Eng. 57, 219–226 (2010). https://doi.org/10.1134/S0040601510030055
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0040601510030055