Abstract
Current weapon system lubricants have performance limitations in extreme climatic conditions, specifically in sand and dust and cold environments. An alternative solid lubricant based lubrication system was investigated and validated using the ASTM subscale tests. The solid lubricants were selected and evaluated based on weapon system lubrication requirements. The solid lubrication systems were evaluated for coefficient of friction, wear, load carrying capacity, endurance (wear) life and corrosion resistance. The novel lubrication system showed superior subscale performance compared to current gun lubricants. It has the potential to provide much better performance than current gun lubricants, especially in sand, cold and humid environments.
Similar content being viewed by others
References
G.A. Strahl, M197 Lubricant Evaluation Test, AD-B205195 (November 1993).
R.L. Shubkin, Synthetic Lubricants and High Performance Functional Fluids (Dekker, New York, 1992).
R.E. Booser, CRC Handbook of Lubrication and Tribology, Vol. III, Monitoring, Materials, Synthetic Lubricants and Applications (CRC Press, Boca Raton, FL, 1994).
G.A. Strahl, M197 Gun Lubrication in Sand Environment, ARCCDTR-91008 (1992).
G.A. Strahl, M230 Gun Lubrication Evaluation Test, ARCCD-TR-94004 (1995).
A.T. Galbato, High Temperature Solid Lubricant Bearing Development, WRDC-TR-90-2085, Final Report (November 1990).
B. Bhushan and P.K. Gupta, Handbook of Tribology-Materials Coatings and Surface Treatments (McGraw Hill, New York, 1991) ch. 6.2.
H.K. Trivedi and D.T. Gerardi, High Temperature Bearing Material and Lubricant Evaluation, Final Report, WL-TR-96-2120 (August 1999).
M.G.S. Naylor, Development of Wear-Resistant Ceramic Coatings for Diesel Engine Components, Vol. 1, Coating Development and Tribological Testing, ORNL/SOB/987-SA581/1 (June 1992).
R. Tom, L. Moore, W.D. Proul, and T.P. Chang, Surf. Coat. Technol. 62 (1993) 423.
I. Ahmad, The Problem of Gun Barrel Erosion: An Overview, Gun Propulsion Tech., ed. L. Stiefel (1988) pp. 311–355.
M. Rhoads, B. Shucktis and M. Johnson, Thin Dense Chrome Bearing Insertion Program, WL-TR-97-2053 (March 1997).
FAG Rolling Bearings with Thin-Layer Chromium Plating, FAG Pub., WL-43-1203 (June 1994).
R.F. Hochman, A. Erdemir, F.J. Dolan and R.L. Thom, J. Vac. Sci. Technol. A 3(6) (November/December 1995) 2348.
L. Rosado, V.K. Jain and H.K. Trivedi, Wear 212 (1997) 1.
R. Wei, P.J. Wilbur, M. Liston and G. Lux, Wear 162–164 (1993) 558.
R. Wei, P.J. Wilbur and F.M. Justas, J. Tribol. 114 (1992) 298.
E.L. McMurtrey, Lubrication Handbook for Space Industry, NASA TM-86556 (1985).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Trivedi, H.K., Massey, M.M., Bhattacharya, R.S. et al. Next generation lubrication system for weapons. Tribology Letters 10, 229–235 (2001). https://doi.org/10.1023/A:1016604706332
Issue Date:
DOI: https://doi.org/10.1023/A:1016604706332