Abstract
The cavitation problem of a composite ball under a uniform temperature is investigated, and the ball is composed of two elastic solid materials. The nonlinear mathematical model of the problem is established with the finite logarithmic strain measure for a large geometric deformation and by the Hooke law for elastic materials. The analytic solutions in a parametric form are derived for the thermal dilatation of the composite ball with a large elastic deformation. Solution curves are given to describe the variations of the critical temperature in the cavitation with the geometric and material parameters. The bifurcation curve is also given to reveal the cavity growth after void nucleation. The numerical results for a computational example indicate that the radius of the cavity will rapidly grow above the critical temperature, and the loop stress will become infinite when void nucleation. This means that the materials near the cavity will produce a plastic deformation leading to local failure and fracture if the material of the internal ball is elastoplastic. In addition, the cavitation of the composite ball appears at a low temperature if the elastic property of the material of the internal ball is nearly uncompressible.
Similar content being viewed by others
References
Tvergaad, V. Material failure by void growth to coalescence. Advances in Applied Mechanics, Vol. 27, Academic Press, San Diego, 83–151 (1989)
McClintock, F. A. A criterion for ductile fracture by growth of holes. Journal of Applied Mechanics, 35(3), 363–371 (1968)
Rice, J. R. and Tracey, D. M. On the ductile enlargement of voids in triaxial stress fields. Journal of the Mechanics and Physics of Solids, 17(3), 201–217 (1969)
Ball, J. M. Discontinuous equilibrium solutions and cavitation in nonlinear elasticity. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Science, 306, 557–611 (1982)
Horgan, C. O. and Abeyaratne, R. A bifurcation problem for a compressible nonlinearly elastic medium: growth of a micro-void. Journal of Elasticity, 16(2), 189–200 (1986)
Horgan, C. O. and Polignone, D. A. Cavitation in nonlinearly elastic solid: a review. Applied Mechanics Reviews, 48(6), 471–485 (1995)
Shang, X. C. and Cheng, C. J. The spherical cavitation bifurcation in hyperelastic materials. Acta Mechanica Sinica, 28(6), 751–755 (1996)
Shang, X. C. and Cheng, C. J. Exact solution for cavitated bifurcation for compressible hyperelastic materials. International Journal of Engineering Science, 39(10), 1101–1117 (2001)
Jin, M., Huang, K. F., and Wu, J. K. A study of the catastrophe and the cavitation for a spherical cavity in Hooke's material with 1/2 Poisson's ratio. Applied Mathematics and Mechanics (English Edition), 20(8), 928–935 (2001) DOI 10.1007/BF02452493
Shang, X. C. and Cheng, C. J. Cavitation in Hookean elastic membranes (in Chinese). Acta Mechanica Solida Sinica, 16(2), 126–129 (2002)
Shang, X. C. and Cheng, C. J. Void nucleation and growth for elastic solid materials. Journal of University of Science and Technology Beijing, 24(3), 380–382 (2002)
Shang, X. C., Cheng, C. J., and Hu, Y. Y. Cavitated bifurcation in Hookean elastic and elasticplastic materials. Proceedings of the 4th International Conference on Nonlinear Mechanical (ed. Chien, W. Z.), Shanghai University Press, Shanghai, 315–319 (2002)
Ning, J. G., Li, W., Hao, J. F., Liu, H. Y., and Huang, Z. P. Influence of the temperature on the cavitation instability under plane strain condition (in Chinese). Acta Mechanica Solida Sinica, 24(3), 259–263 (2003)
Ren, J. S. and Cheng, C. J. Cavitation problem for thermohyperelastic materials (in Chinese). Acta Mechanica Solida Sinica, 25(3), 275–278 (2004)
Author information
Authors and Affiliations
Additional information
Project supported by the National Natural Science Foundation of China (No. 10772024)
Rights and permissions
About this article
Cite this article
Shang, Xc., Zhang, R. & Ren, Hl. Analysis of cavitation problem of heated elastic composite ball. Appl. Math. Mech.-Engl. Ed. 32, 587–594 (2011). https://doi.org/10.1007/s10483-011-1440-9
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10483-011-1440-9